OpenWrt – Diff between revs 2 and 3
?pathlinks?
Rev 2 | Rev 3 | |||
---|---|---|---|---|
1 | /dts-v1/; |
1 | /dts-v1/; |
|
2 | |
2 | |
|
3 | #include "mt7628an.dtsi" |
3 | #include "mt7628an.dtsi" |
|
4 | |
4 | |
|
5 | #include <dt-bindings/gpio/gpio.h> |
5 | #include <dt-bindings/gpio/gpio.h> |
|
6 | #include <dt-bindings/input/input.h> |
6 | #include <dt-bindings/input/input.h> |
|
7 | |
7 | |
|
8 | / { |
8 | / { |
|
9 | compatible = "d-team,pbr-d1", "mediatek,mt7628an-soc"; |
9 | compatible = "d-team,pbr-d1", "mediatek,mt7628an-soc"; |
|
10 | model = "PBR-D1"; |
10 | model = "PBR-D1"; |
|
11 | |
- | ||
12 | aliases { |
- | ||
13 | led-boot = &led_power; |
- | ||
14 | led-failsafe = &led_power; |
- | ||
15 | led-running = &led_power; |
- | ||
16 | led-upgrade = &led_power; |
- | ||
17 | }; |
- | ||
18 | |
11 | |
|
19 | chosen { |
12 | chosen { |
|
20 | bootargs = "console=ttyS0,115200"; |
13 | bootargs = "console=ttyS0,115200"; |
|
21 | }; |
14 | }; |
|
22 | |
15 | |
|
23 | aliases { |
16 | aliases { |
|
24 | serial0 = &uart2; |
17 | serial0 = &uart2; |
|
25 | }; |
18 | }; |
|
26 | |
19 | |
|
27 | memory@0 { |
20 | memory@0 { |
|
28 | device_type = "memory"; |
21 | device_type = "memory"; |
|
29 | reg = <0x0 0x8000000>; |
22 | reg = <0x0 0x8000000>; |
|
30 | }; |
23 | }; |
|
31 | |
24 | |
|
32 | leds { |
25 | gpio-leds { |
|
33 | compatible = "gpio-leds"; |
26 | compatible = "gpio-leds"; |
|
34 | |
27 | |
|
35 | usb { |
28 | usb { |
|
36 | label = "pbr-d1:orange:usb"; |
29 | label = "pbr-d1:orange:usb"; |
|
37 | gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; |
30 | gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; |
|
38 | trigger-sources = <&ohci_port1>, <&ehci_port1>; |
- | ||
39 | linux,default-trigger = "usbport"; |
31 | default-state = "off"; |
|
40 | }; |
32 | }; |
|
41 | |
33 | |
|
42 | led_power: power { |
34 | power { |
|
43 | label = "pbr-d1:orange:power"; |
35 | label = "pbr-d1:orange:power"; |
|
44 | gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; |
36 | gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; |
|
45 | default-state = "on"; |
37 | default-state = "on"; |
|
46 | }; |
38 | }; |
|
47 | }; |
39 | }; |
|
48 | |
40 | |
|
49 | keys { |
41 | gpio-keys-polled { |
|
- | 42 | compatible = "gpio-keys-polled"; |
||
- | 43 | #address-cells = <1>; |
||
50 | compatible = "gpio-keys-polled"; |
44 | #size-cells = <0>; |
|
51 | poll-interval = <20>; |
45 | poll-interval = <20>; |
|
52 | |
46 | |
|
53 | reset { |
47 | reset { |
|
54 | label = "reset"; |
48 | label = "reset"; |
|
55 | gpios = <&gpio1 38 GPIO_ACTIVE_LOW>; |
49 | gpios = <&gpio1 38 GPIO_ACTIVE_LOW>; |
|
56 | linux,code = <KEY_RESTART>; |
50 | linux,code = <KEY_RESTART>; |
|
57 | }; |
51 | }; |
|
58 | }; |
52 | }; |
|
59 | |
53 | |
|
60 | wgpio: gpio-wifi { |
54 | wgpio: gpio-wifi { |
|
61 | compatible = "mediatek,gpio-wifi"; |
55 | compatible = "mediatek,gpio-wifi"; |
|
62 | #address-cells = <1>; |
56 | #address-cells = <1>; |
|
63 | #size-cells = <0>; |
57 | #size-cells = <0>; |
|
64 | gpio-controller; |
58 | gpio-controller; |
|
65 | #gpio-cells = <2>; |
59 | #gpio-cells = <2>; |
|
66 | }; |
60 | }; |
|
67 | }; |
61 | }; |
|
68 | |
62 | |
|
69 | &pinctrl { |
63 | &pinctrl { |
|
70 | state_default: pinctrl0 { |
64 | state_default: pinctrl0 { |
|
71 | gpio { |
65 | gpio { |
|
72 | ralink,group = "gpio"; |
66 | ralink,group = "gpio"; |
|
73 | ralink,function = "gpio"; |
67 | ralink,function = "gpio"; |
|
74 | }; |
68 | }; |
|
75 | |
69 | |
|
76 | i2c { |
70 | i2c { |
|
77 | ralink,group = "i2c"; |
71 | ralink,group = "i2c"; |
|
78 | ralink,function = "gpio"; |
72 | ralink,function = "gpio"; |
|
79 | }; |
73 | }; |
|
80 | |
74 | |
|
81 | i2s { |
75 | i2s { |
|
82 | ralink,group = "i2s"; |
76 | ralink,group = "i2s"; |
|
83 | ralink,function = "gpio"; |
77 | ralink,function = "gpio"; |
|
84 | }; |
78 | }; |
|
85 | |
79 | |
|
86 | spis { |
80 | spis { |
|
87 | ralink,group = "spis"; |
81 | ralink,group = "spis"; |
|
88 | ralink,function = "gpio"; |
82 | ralink,function = "gpio"; |
|
89 | }; |
83 | }; |
|
90 | |
84 | |
|
91 | wdt { |
85 | wdt { |
|
92 | ralink,group = "wdt"; |
86 | ralink,group = "wdt"; |
|
93 | ralink,function = "gpio"; |
87 | ralink,function = "gpio"; |
|
94 | }; |
88 | }; |
|
95 | }; |
89 | }; |
|
96 | }; |
90 | }; |
|
97 | |
91 | |
|
98 | &spi0 { |
92 | &spi0 { |
|
99 | status = "okay"; |
93 | status = "okay"; |
|
100 | |
94 | |
|
101 | pinctrl-names = "default"; |
95 | pinctrl-names = "default"; |
|
102 | pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>; |
96 | pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>; |
|
103 | |
97 | |
|
104 | m25p80@0 { |
98 | m25p80@0 { |
|
- | 99 | #address-cells = <1>; |
||
- | 100 | #size-cells = <1>; |
||
105 | compatible = "jedec,spi-nor"; |
101 | compatible = "jedec,spi-nor"; |
|
106 | reg = <0>; |
102 | reg = <0>; |
|
107 | spi-max-frequency = <40000000>; |
103 | spi-max-frequency = <40000000>; |
|
108 | |
- | ||
109 | partitions { |
- | ||
110 | compatible = "fixed-partitions"; |
- | ||
111 | #address-cells = <1>; |
- | ||
112 | #size-cells = <1>; |
104 | m25p,chunked-io = <31>; |
|
113 | |
105 | |
|
114 | partition@0 { |
106 | partition@0 { |
|
115 | label = "u-boot"; |
107 | label = "u-boot"; |
|
116 | reg = <0x0 0x30000>; |
108 | reg = <0x0 0x30000>; |
|
117 | read-only; |
109 | read-only; |
|
118 | }; |
110 | }; |
|
119 | |
111 | |
|
120 | partition@30000 { |
112 | partition@30000 { |
|
121 | label = "u-boot-env"; |
113 | label = "u-boot-env"; |
|
122 | reg = <0x30000 0x10000>; |
114 | reg = <0x30000 0x10000>; |
|
123 | }; |
115 | }; |
|
124 | |
116 | |
|
125 | factory: partition@40000 { |
117 | factory: partition@40000 { |
|
126 | label = "factory"; |
118 | label = "factory"; |
|
127 | reg = <0x40000 0x10000>; |
119 | reg = <0x40000 0x10000>; |
|
128 | read-only; |
120 | read-only; |
|
129 | }; |
121 | }; |
|
130 | |
122 | |
|
131 | partition@50000 { |
123 | partition@50000 { |
|
132 | compatible = "denx,uimage"; |
- | ||
133 | label = "firmware"; |
124 | label = "firmware"; |
|
134 | reg = <0x50000 0x0fb0000>; |
125 | reg = <0x50000 0x0fb0000>; |
|
135 | }; |
126 | }; |
|
136 | }; |
- | ||
137 | }; |
127 | }; |
|
138 | |
128 | |
|
139 | spidev@1 { |
129 | spidev@1 { |
|
140 | #address-cells = <1>; |
130 | #address-cells = <1>; |
|
141 | #size-cells = <1>; |
131 | #size-cells = <1>; |
|
142 | compatible = "linux,spidev"; |
132 | compatible = "linux,spidev"; |
|
143 | reg = <1>; |
133 | reg = <1>; |
|
144 | spi-max-frequency = <40000000>; |
134 | spi-max-frequency = <40000000>; |
|
145 | }; |
135 | }; |
|
146 | }; |
136 | }; |
|
147 | |
137 | |
|
148 | &i2c { |
138 | &i2c { |
|
149 | status = "okay"; |
139 | status = "okay"; |
|
150 | }; |
140 | }; |
|
151 | |
141 | |
|
152 | &uart1 { |
142 | &uart1 { |
|
153 | status = "okay"; |
143 | status = "okay"; |
|
154 | }; |
144 | }; |
|
155 | |
145 | |
|
156 | &uart2 { |
146 | &uart2 { |
|
157 | status = "okay"; |
147 | status = "okay"; |
|
158 | }; |
148 | }; |
|
159 | |
149 | |
|
160 | &pwm { |
150 | &pwm { |
|
161 | status = "okay"; |
151 | status = "okay"; |
|
162 | }; |
152 | }; |
|
163 | |
153 | |
|
164 | ðernet { |
154 | ðernet { |
|
165 | mtd-mac-address = <&factory 0x28>; |
155 | mtd-mac-address = <&factory 0x28>; |
|
166 | }; |
156 | }; |
|
167 | |
157 | |
|
168 | &sdhci { |
158 | &sdhci { |
|
169 | status = "okay"; |
159 | status = "okay"; |
|
170 | mediatek,cd-high; |
160 | mediatek,cd-high; |
|
171 | }; |
161 | }; |
|
172 | |
162 | |