arduino-sketches

Subversion Repositories:
Compare Path: Rev
With Path: Rev
?path1? @ 8  →  ?path2? @ 9
/arduinoPinToggle/arduinoPinToogle (with analog measurement).ino
@@ -0,0 +1,351 @@
/*************************************************************************/
/* Copyright (C) 2022 Wizardry and Steamworks - License: GNU GPLv3 */
/*************************************************************************/
// The AP to connect to via Wifi.
#define STA_SSID ""
// The AP Wifi password.
#define STA_PSK ""
// The MQTT broker to connect to.
#define MQTT_HOST ""
// The MQTT broker username.
#define MQTT_USERNAME ""
// The MQTT broker password.
#define MQTT_PASSWORD ""
// The MQTT broker port.
#define MQTT_PORT 1883
// The default MQTT client ID is "esp-CHIPID" where CHIPID is the ESP8266
// or ESP32 chip identifier.
#define MQTT_CLIENT_ID() String("esp-" + String(GET_CHIP_ID(), HEX))
// The authentication password to use for OTA updates.
#define OTA_PASSWORD ""
// The OTA port on which updates take place.
#define OTA_PORT 8266
// The default topic that the sketch subscribes to is "esp/CHIPID" where
// CHIPID is the ESP8266 or ESP32 chip identifier.
#define MQTT_TOPIC() String("esp/" + String(GET_CHIP_ID(), HEX))
// Platform specific defines.
#if defined(ARDUINO_ARCH_ESP8266)
#define GET_CHIP_ID() (ESP.getChipId())
#elif defined(ARDUINO_ARCH_ESP32)
#define GET_CHIP_ID() ((uint16_t)(ESP.getEfuseMac()>>32))
#endif
// Miscellaneous defines.
//#define CHIP_ID_HEX (String(GET_CHIP_ID()).c_str())
#define HOSTNAME() String("esp-" + String(GET_CHIP_ID(), HEX))
// Platform specific libraries.
#if defined(ARDUINO_ARCH_ESP8266)
#include <ESP8266WiFi.h>
#include <ESP8266mDNS.h>
#elif defined(ARDUINO_ARCH_ESP32)
#include <WiFi.h>
#include <ESPmDNS.h>
#endif
// General libraries.
#include <WiFiUdp.h>
#include <ArduinoOTA.h>
#include <PubSubClient.h>
#include <ArduinoJson.h>
#if defined(ARDUINO_ARCH_ESP32)
#include <FS.h>
#include <SPIFFS.h>
#endif
const char *sta_ssid = STA_SSID;
const char *sta_psk = STA_PSK;
const char *mqtt_host = MQTT_HOST;
const char *mqtt_username = MQTT_USERNAME;
const char *mqtt_password = MQTT_PASSWORD;
const int mqtt_port = MQTT_PORT;
const char *ota_password = OTA_PASSWORD;
const int ota_port = OTA_PORT;
WiFiClient espClient;
PubSubClient mqttClient(espClient);
// Define GPIO pins for supported architectures.
#if defined(ARDUINO_ARCH_ESP8266)
int PINS[] = { D0, D1, D2, D3, D4, D5, D6, D7, D8 };
int ANAL[] = { A0 };
#elif defined(ARDUINO_ARCH_ESP32)
int PINS[] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
12, 13, 14, 15, 16, 17, 18, 19, 21, 22,
23, 25, 26, 27, 32, 33, 34, 35, 36, 37,
38, 39
};
int ANAL[] = { 36, 39, 34, 35 };
#endif
String mqttSerialize(StaticJsonDocument<256> msg) {
char output[256];
serializeJson(msg, output, 256);
return String(output);
}
void mqttCallback(char *topic, byte *payload, unsigned int length) {
String msgTopic = String(topic);
// payload is not null terminated and casting will not work
char msgPayload[length + 1];
snprintf(msgPayload, length + 1, "%s", payload);
Serial.println("Message received on topic: " + String(topic) + " with payload: " + String(msgPayload));
// Parse the payload sent to the MQTT topic as a JSON document.
StaticJsonDocument<256> doc;
Serial.println("Deserializing message....");
DeserializationError error = deserializeJson(doc, msgPayload);
if (error) {
Serial.println("Failed to parse MQTT payload as JSON: " + String(error.c_str()));
return;
}
// Do not process messages without an action key.
if (!doc.containsKey("action")) {
return;
}
String action = (const char *)doc["action"];
if(action == "set") {
String state = (const char *)doc["state"];
const int pin = (const int)doc["pin"];
Serial.println("Setting pin: " + String(pin) + " to state: " + String(state));
pinMode(PINS[pin], OUTPUT);
if (state == "on") {
digitalWrite(PINS[pin], HIGH);
int status = digitalRead(PINS[pin]);
Serial.println("Pin " + String(pin) + " state is now: " + String(status));
return;
}
digitalWrite(PINS[pin], LOW);
int status = digitalRead(PINS[pin]);
Serial.println("Pin " + String(pin) + " state is now: " + String(status));
return;
}
if(action == "get") {
const int pin = (const int)doc["pin"];
Serial.println("Getting pin: " + String(pin) + " state.");
int status = digitalRead(PINS[pin]);
Serial.println("Pin " + String(pin) + " state is now: " + String(status));
// Announce the action.
StaticJsonDocument<256> msg;
msg["pin"] = pin;
switch(status) {
case 1:
msg["state"] = "on";
break;
case 0:
msg["state"] = "off";
break;
default:
msg["state"] = "unknown";
break;
}
mqttClient.publish(MQTT_TOPIC().c_str(), mqttSerialize(msg).c_str());
return;
}
 
if(action == "measure") {
const int pin = (const int)doc["pin"];
Serial.println("Getting analog pin: " + String(pin) + " state.");
int analogValue = analogRead(ANAL[pin]);
 
Serial.println("Value of analog pin " + String(pin) + " is: " + String(analogValue));
 
// Announce the analog value.
StaticJsonDocument<256> msg;
msg["pin"] = pin;
msg["value"] = analogValue;
mqttClient.publish(MQTT_TOPIC().c_str(), mqttSerialize(msg).c_str());
return;
}
}
bool mqttConnect() {
Serial.println("Attempting to connect to MQTT broker: " + String(mqtt_host));
mqttClient.setServer(mqtt_host, mqtt_port);
StaticJsonDocument<256> msg;
if (mqttClient.connect(MQTT_CLIENT_ID().c_str(), mqtt_username, mqtt_password)) {
Serial.println("Established connection with MQTT broker using client ID: " + MQTT_CLIENT_ID());
mqttClient.setCallback(mqttCallback);
msg["action"] = "connected";
mqttClient.publish(MQTT_TOPIC().c_str(), mqttSerialize(msg).c_str());
Serial.println("Attempting to subscribe to MQTT topic: " + MQTT_TOPIC());
if (!mqttClient.subscribe(MQTT_TOPIC().c_str())) {
Serial.println("Failed to subscribe to MQTT topic: " + MQTT_TOPIC());
return false;
}
Serial.println("Subscribed to MQTT topic: " + MQTT_TOPIC());
msg.clear();
msg["action"] = "subscribed";
mqttClient.publish(MQTT_TOPIC().c_str(), mqttSerialize(msg).c_str());
return true;
}
Serial.println("Connection to MQTT broker failed with MQTT client state: " + String(mqttClient.state()));
return false;
}
bool loopWifiConnected() {
// Process OTA loop first since emergency OTA updates might be needed.
ArduinoOTA.handle();
// Process MQTT client loop.
if (!mqttClient.connected()) {
// If the connection to the MQTT broker has failed then sleep before carrying on.
if (!mqttConnect()) {
return false;
}
}
mqttClient.loop();
return true;
}
void setup() {
Serial.begin(115200);
Serial.println("Booted, setting up Wifi in 10s...");
delay(10000);
WiFi.mode(WIFI_STA);
#if defined(ARDUINO_ARCH_ESP8266)
WiFi.hostname(HOSTNAME().c_str());
#elif defined(ARDUINO_ARCH_ESP32)
WiFi.setHostname(HOSTNAME().c_str());
#endif
WiFi.begin(sta_ssid, sta_psk);
while (WiFi.waitForConnectResult() != WL_CONNECTED) {
Serial.println("Failed to connect to Wifi, rebooting in 5s...");
delay(5000);
ESP.restart();
}
Serial.print("Connected to Wifi: ");
Serial.println(WiFi.localIP());
Serial.println("Setting up OTA in 10s...");
delay(10000);
// Port defaults to 8266
ArduinoOTA.setPort(ota_port);
// Hostname defaults to esp-[ChipID]
ArduinoOTA.setHostname(HOSTNAME().c_str());
// Set the OTA password
ArduinoOTA.setPassword(ota_password);
ArduinoOTA.onStart([]() {
switch (ArduinoOTA.getCommand()) {
case U_FLASH: // Sketch
Serial.println("OTA start updating sketch.");
break;
#if defined(ARDUINO_ARCH_ESP8266)
case U_FS:
#elif defined(ARDUINO_ARCH_ESP32)
case U_SPIFFS:
#endif
Serial.println("OTA start updating filesystem.");
SPIFFS.end();
break;
default:
Serial.println("Unknown OTA update type.");
break;
}
});
ArduinoOTA.onEnd([]() {
Serial.println("OTA update complete.");
SPIFFS.begin();
#if defined(ARDUINO_ARCH_ESP8266)
// For what it's worth, check the filesystem on ESP8266.
SPIFFS.check();
#endif
ESP.restart();
});
ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
Serial.printf("OTA update progress: %u%%\r", (progress / (total / 100)));
});
ArduinoOTA.onError([](ota_error_t error) {
Serial.printf("OTA update error [%u]: ", error);
switch (error) {
case OTA_AUTH_ERROR:
Serial.println("OTA authentication failed");
break;
case OTA_BEGIN_ERROR:
Serial.println("OTA begin failed");
break;
case OTA_CONNECT_ERROR:
Serial.println("OTA connect failed");
break;
case OTA_RECEIVE_ERROR:
Serial.println("OTA receive failed");
break;
case OTA_END_ERROR:
Serial.println("OTA end failed");
break;
default:
Serial.println("Unknown OTA failure");
break;
}
ESP.restart();
});
ArduinoOTA.begin();
// Set up MQTT client.
mqttClient.setServer(mqtt_host, mqtt_port);
mqttClient.setCallback(mqttCallback);
// Touchdown.
Serial.println("Setup complete.");
}
void loop() {
// Check the Wifi connection status.
int wifiStatus = WiFi.status();
switch (wifiStatus) {
case WL_CONNECTED:
if (!loopWifiConnected()) {
delay(1000);
break;
}
delay(1);
break;
case WL_NO_SHIELD:
Serial.println("No Wifi shield present.");
goto DEFAULT_CASE;
break;
case WL_NO_SSID_AVAIL:
Serial.println("Configured SSID not found.");
goto DEFAULT_CASE;
break;
// Temporary statuses indicating transitional states.
case WL_IDLE_STATUS:
case WL_SCAN_COMPLETED:
delay(1000);
break;
// Fatal Wifi statuses trigger a delayed ESP restart.
case WL_CONNECT_FAILED:
case WL_CONNECTION_LOST:
case WL_DISCONNECTED:
default:
Serial.println("Wifi connection failed with status: " + String(wifiStatus));
DEFAULT_CASE:
delay(10000);
ESP.restart();
break;
}
}