| /branches/gl-inet/target/linux/kirkwood/patches-4.9/107-02-nsa310b.patch |
|---|
| @@ -0,0 +1,147 @@ |
|---|
| kirkwood: add nsa310b dtb, a zyxel nsa310 variant |
| |
| add support to a nsa310 variant with red/green usb led |
| and lm85 temp/fan controller |
| |
| Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it> |
| |
| NOTE: this patch can be upstreamed as-is, LEDE-specific |
| nand partitions are set in another patch |
| |
| --- a/arch/arm/boot/dts/Makefile |
| +++ b/arch/arm/boot/dts/Makefile |
| @@ -238,6 +238,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ |
| kirkwood-ns2mini.dtb \ |
| kirkwood-nsa310.dtb \ |
| kirkwood-nsa310a.dtb \ |
| + kirkwood-nsa310b.dtb \ |
| kirkwood-nsa320.dtb \ |
| kirkwood-nsa325.dtb \ |
| kirkwood-openblocks_a6.dtb \ |
| --- /dev/null |
| +++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts |
| @@ -0,0 +1,124 @@ |
| +/dts-v1/; |
| + |
| +#include "kirkwood-nsa3x0-common.dtsi" |
| + |
| +/* |
| + * There are at least two different NSA310 designs. This variant has |
| + * a red/green USB Led (same as nsa310) and a lm85 temp/fan controller. |
| + */ |
| + |
| +/ { |
| + model = "ZyXEL NSA310b"; |
| + compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; |
| + |
| + memory { |
| + device_type = "memory"; |
| + reg = <0x00000000 0x10000000>; |
| + }; |
| + |
| + chosen { |
| + bootargs = "console=ttyS0,115200"; |
| + stdout-path = &uart0; |
| + }; |
| + |
| + ocp@f1000000 { |
| + pinctrl: pin-controller@10000 { |
| + pinctrl-names = "default"; |
| + |
| + pmx_led_esata_green: pmx-led-esata-green { |
| + marvell,pins = "mpp12"; |
| + marvell,function = "gpio"; |
| + }; |
| + |
| + pmx_led_esata_red: pmx-led-esata-red { |
| + marvell,pins = "mpp13"; |
| + marvell,function = "gpio"; |
| + }; |
| + |
| + pmx_led_usb_green: pmx-led-usb-green { |
| + marvell,pins = "mpp15"; |
| + marvell,function = "gpio"; |
| + }; |
| + |
| + pmx_led_usb_red: pmx-led-usb-red { |
| + marvell,pins = "mpp16"; |
| + marvell,function = "gpio"; |
| + }; |
| + |
| + pmx_led_sys_green: pmx-led-sys-green { |
| + marvell,pins = "mpp28"; |
| + marvell,function = "gpio"; |
| + }; |
| + |
| + pmx_led_sys_red: pmx-led-sys-red { |
| + marvell,pins = "mpp29"; |
| + marvell,function = "gpio"; |
| + }; |
| + |
| + pmx_led_hdd_green: pmx-led-hdd-green { |
| + marvell,pins = "mpp41"; |
| + marvell,function = "gpio"; |
| + }; |
| + |
| + pmx_led_hdd_red: pmx-led-hdd-red { |
| + marvell,pins = "mpp42"; |
| + marvell,function = "gpio"; |
| + }; |
| + |
| + }; |
| + |
| + i2c@11000 { |
| + status = "okay"; |
| + |
| + lm85: lm85@2e { |
| + compatible = "national,lm85"; |
| + reg = <0x2e>; |
| + }; |
| + }; |
| + }; |
| + |
| + gpio-leds { |
| + compatible = "gpio-leds"; |
| + |
| + green-sys { |
| + label = "nsa310:green:sys"; |
| + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; |
| + }; |
| + red-sys { |
| + label = "nsa310:red:sys"; |
| + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; |
| + }; |
| + green-hdd { |
| + label = "nsa310:green:hdd"; |
| + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; |
| + }; |
| + red-hdd { |
| + label = "nsa310:red:hdd"; |
| + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; |
| + }; |
| + green-esata { |
| + label = "nsa310:green:esata"; |
| + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; |
| + }; |
| + red-esata { |
| + label = "nsa310:red:esata"; |
| + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; |
| + }; |
| + green-usb { |
| + label = "nsa310:green:usb"; |
| + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; |
| + }; |
| + red-usb { |
| + label = "nsa310:red:usb"; |
| + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; |
| + }; |
| + green-copy { |
| + label = "nsa310:green:copy"; |
| + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
| + }; |
| + red-copy { |
| + label = "nsa310:red:copy"; |
| + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; |
| + }; |
| + }; |
| +}; |
