/branches/gl-inet/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt.c |
@@ -0,0 +1,205 @@ |
/* |
* Ubiquiti RouterStation support |
* |
* Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> |
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> |
* Copyright (C) 2008 Ubiquiti <support@ubnt.com> |
* |
* This program is free software; you can redistribute it and/or modify it |
* under the terms of the GNU General Public License version 2 as published |
* by the Free Software Foundation. |
*/ |
|
#include <asm/mach-ath79/ath79.h> |
|
#include "dev-eth.h" |
#include "dev-gpio-buttons.h" |
#include "dev-leds-gpio.h" |
#include "dev-m25p80.h" |
#include "dev-usb.h" |
#include "machtypes.h" |
#include "pci.h" |
|
#define UBNT_RS_GPIO_LED_RF 2 |
#define UBNT_RS_GPIO_SW4 8 |
|
#define UBNT_LS_SR71_GPIO_LED_D25 0 |
#define UBNT_LS_SR71_GPIO_LED_D26 1 |
#define UBNT_LS_SR71_GPIO_LED_D24 2 |
#define UBNT_LS_SR71_GPIO_LED_D23 4 |
#define UBNT_LS_SR71_GPIO_LED_D22 5 |
#define UBNT_LS_SR71_GPIO_LED_D27 6 |
#define UBNT_LS_SR71_GPIO_LED_D28 7 |
|
#define UBNT_KEYS_POLL_INTERVAL 20 /* msecs */ |
#define UBNT_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_KEYS_POLL_INTERVAL) |
|
static struct gpio_led ubnt_rs_leds_gpio[] __initdata = { |
{ |
.name = "ubnt:green:rf", |
.gpio = UBNT_RS_GPIO_LED_RF, |
.active_low = 0, |
} |
}; |
|
static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = { |
{ |
.name = "ubnt:green:d22", |
.gpio = UBNT_LS_SR71_GPIO_LED_D22, |
.active_low = 0, |
}, { |
.name = "ubnt:green:d23", |
.gpio = UBNT_LS_SR71_GPIO_LED_D23, |
.active_low = 0, |
}, { |
.name = "ubnt:green:d24", |
.gpio = UBNT_LS_SR71_GPIO_LED_D24, |
.active_low = 0, |
}, { |
.name = "ubnt:red:d25", |
.gpio = UBNT_LS_SR71_GPIO_LED_D25, |
.active_low = 0, |
}, { |
.name = "ubnt:red:d26", |
.gpio = UBNT_LS_SR71_GPIO_LED_D26, |
.active_low = 0, |
}, { |
.name = "ubnt:green:d27", |
.gpio = UBNT_LS_SR71_GPIO_LED_D27, |
.active_low = 0, |
}, { |
.name = "ubnt:green:d28", |
.gpio = UBNT_LS_SR71_GPIO_LED_D28, |
.active_low = 0, |
} |
}; |
|
static struct gpio_keys_button ubnt_gpio_keys[] __initdata = { |
{ |
.desc = "sw4", |
.type = EV_KEY, |
.code = KEY_RESTART, |
.debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL, |
.gpio = UBNT_RS_GPIO_SW4, |
.active_low = 1, |
} |
}; |
|
static const char *ubnt_part_probes[] = { |
"RedBoot", |
NULL, |
}; |
|
static struct flash_platform_data ubnt_flash_data = { |
.part_probes = ubnt_part_probes, |
}; |
|
static void __init ubnt_generic_setup(void) |
{ |
ath79_register_m25p80(&ubnt_flash_data); |
|
ath79_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL, |
ARRAY_SIZE(ubnt_gpio_keys), |
ubnt_gpio_keys); |
ath79_register_pci(); |
} |
|
#define UBNT_RS_WAN_PHYMASK BIT(20) |
#define UBNT_RS_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19)) |
|
static void __init ubnt_rs_setup(void) |
{ |
ubnt_generic_setup(); |
|
ath79_register_mdio(0, ~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK)); |
|
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); |
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; |
ath79_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK; |
|
/* |
* There is Secondary MAC address duplicate problem with some |
* UBNT HW batches. Do not increase Secondary MAC address by 1 |
* but do workaround with 'Locally Administrated' bit. |
*/ |
ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base); |
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; |
ath79_eth1_data.speed = SPEED_100; |
ath79_eth1_data.duplex = DUPLEX_FULL; |
|
ath79_register_eth(0); |
ath79_register_eth(1); |
|
ath79_register_usb(); |
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), |
ubnt_rs_leds_gpio); |
} |
|
MIPS_MACHINE(ATH79_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation", |
ubnt_rs_setup); |
|
#define UBNT_RSPRO_WAN_PHYMASK BIT(4) |
#define UBNT_RSPRO_LAN_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3)) |
|
static void __init ubnt_rspro_setup(void) |
{ |
ubnt_generic_setup(); |
|
ath79_register_mdio(0, ~(UBNT_RSPRO_WAN_PHYMASK | |
UBNT_RSPRO_LAN_PHYMASK)); |
|
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); |
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; |
ath79_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK; |
|
/* |
* There is Secondary MAC address duplicate problem with some |
* UBNT HW batches. Do not increase Secondary MAC address by 1 |
* but do workaround with 'Locally Administrated' bit. |
*/ |
ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base); |
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; |
ath79_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK; |
ath79_eth1_data.speed = SPEED_1000; |
ath79_eth1_data.duplex = DUPLEX_FULL; |
|
ath79_register_eth(0); |
ath79_register_eth(1); |
|
ath79_register_usb(); |
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), |
ubnt_rs_leds_gpio); |
} |
|
MIPS_MACHINE(ATH79_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro", |
ubnt_rspro_setup); |
|
static void __init ubnt_lsx_setup(void) |
{ |
ubnt_generic_setup(); |
} |
|
MIPS_MACHINE(ATH79_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup); |
|
#define UBNT_LSSR71_PHY_MASK BIT(1) |
|
static void __init ubnt_lssr71_setup(void) |
{ |
ubnt_generic_setup(); |
|
ath79_register_mdio(0, ~UBNT_LSSR71_PHY_MASK); |
|
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); |
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; |
ath79_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK; |
|
ath79_register_eth(0); |
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio), |
ubnt_ls_sr71_leds_gpio); |
} |
|
MIPS_MACHINE(ATH79_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71", |
ubnt_lssr71_setup); |