/branches/gl-inet/target/linux/ar71xx/files/arch/mips/ath79/mach-lima.c |
@@ -0,0 +1,86 @@ |
/* |
* 8devices Lima board support |
* |
* Copyright (C) 2016 Mantas Pucka <mantas@8devices.com> |
* Copyright (C) 2017 Karol Dudek <karoiz@sli.pl> |
* |
* This program is free software; you can redistribute it and/or modify it |
* under the terms of the GNU General Public License version 2 as published |
* by the Free Software Foundation. |
*/ |
|
#include <linux/platform_device.h> |
#include <asm/mach-ath79/ar71xx_regs.h> |
#include <asm/mach-ath79/ath79.h> |
|
#include "common.h" |
#include "dev-ap9x-pci.h" |
#include "dev-eth.h" |
#include "dev-gpio-buttons.h" |
#include "dev-leds-gpio.h" |
#include "dev-m25p80.h" |
#include "dev-spi.h" |
#include "dev-usb.h" |
#include "dev-wmac.h" |
#include "machtypes.h" |
#include "pci.h" |
|
#define LIMA_GPIO_BTN_1_DEFAULT 16 |
#define LIMA_KEYS_POLL_INTERVAL 20 /* msecs */ |
#define LIMA_KEYS_DEBOUNCE_INTERVAL (3 * LIMA_KEYS_POLL_INTERVAL) |
|
#define LIMA_ETH_PHYS (BIT(0) | BIT(1)) |
|
#define LIMA_MAC0_OFFSET 0x0000 |
#define LIMA_MAC1_OFFSET 0x0006 |
|
#define LIMA_CALDATA_OFFSET 0x1000 |
|
static struct gpio_keys_button lima_gpio_keys[] __initdata = { |
{ |
.desc = "button1", |
.type = EV_KEY, |
.code = BTN_1, |
.debounce_interval = LIMA_KEYS_DEBOUNCE_INTERVAL, |
.gpio = LIMA_GPIO_BTN_1_DEFAULT, |
.active_low = 1, |
} |
}; |
|
static void __init lima_setup(void) |
{ |
u8 *art = (u8 *) KSEG1ADDR(0x1f080000); |
|
ath79_register_m25p80(NULL); |
|
ath79_register_gpio_keys_polled(-1, LIMA_KEYS_POLL_INTERVAL, |
ARRAY_SIZE(lima_gpio_keys), |
lima_gpio_keys); |
|
ath79_setup_ar933x_phy4_switch(true, true); |
|
ath79_init_mac(ath79_eth0_data.mac_addr, art + LIMA_MAC0_OFFSET, 0); |
ath79_init_mac(ath79_eth1_data.mac_addr, art + LIMA_MAC1_OFFSET, 0); |
|
ath79_register_mdio(0, ~LIMA_ETH_PHYS); |
|
ath79_switch_data.phy4_mii_en = 1; |
|
ath79_switch_data.phy_poll_mask |= BIT(0); |
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; |
ath79_eth1_data.duplex = DUPLEX_FULL; |
ath79_eth1_data.phy_mask = BIT(1); |
ath79_register_eth(1); |
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; |
ath79_eth0_data.duplex = DUPLEX_FULL; |
ath79_eth0_data.speed = SPEED_100; |
ath79_eth0_data.phy_mask = BIT(0); |
ath79_register_eth(0); |
|
ath79_register_wmac(art + LIMA_CALDATA_OFFSET, NULL); |
ath79_register_usb(); |
ath79_register_pci(); |
} |
|
MIPS_MACHINE(ATH79_MACH_LIMA, "LIMA", "8devices Lima board", lima_setup); |