OpenWrt

Subversion Repositories:
Compare Path: Rev
With Path: Rev
?path1? @ 3  →  ?path2? @ 4
/branches/gl-inet/target/linux/ramips/dts/ZBT-CPE102.dts
@@ -0,0 +1,120 @@
/dts-v1/;
 
#include "mt7620n.dtsi"
 
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
 
/ {
compatible = "zbtlink,zbt-cpe102", "ralink,mt7620n-soc";
model = "Zbtlink ZBT-CPE102";
 
chosen {
bootargs = "console=ttyS0,115200";
};
 
gpio-leds {
compatible = "gpio-leds";
 
4g-0 {
label = "zbt-cpe102:green:4g-0";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
 
4g-1 {
label = "zbt-cpe102:green:4g-1";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
};
 
4g-2 {
label = "zbt-cpe102:green:4g-2";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
};
 
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
 
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
 
&gpio1 {
status = "okay";
};
 
&gpio2 {
status = "okay";
};
 
&gpio3 {
status = "okay";
};
 
&spi0 {
status = "okay";
 
en25q64@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
 
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
 
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
 
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
 
partition@50000 {
label = "firmware";
reg = <0x50000 0x760000>;
};
};
};
 
&ehci {
status = "okay";
};
 
&ohci {
status = "okay";
};
 
&ethernet {
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "wllll";
};
 
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
 
&pinctrl {
state_default: pinctrl0 {
default {
ralink,group = "i2c", "spi refclk", "wled";
ralink,function = "gpio";
};
};
};