OpenWrt

Subversion Repositories:
Compare Path: Rev
With Path: Rev
?path1? @ 3  →  ?path2? @ 4
/branches/gl-inet/target/linux/ramips/dts/GL-MT300N.dts
@@ -0,0 +1,140 @@
/dts-v1/;
 
#include "mt7620a.dtsi"
 
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
 
/ {
compatible = "glinet,gl-mt300n", "ralink,mt7620a-soc";
model = "GL-MT300N";
 
chosen {
bootargs = "console=ttyS0,115200";
};
 
gpio-leds {
compatible = "gpio-leds";
 
wan {
label = "gl-mt300n:wan";
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
};
 
lan {
label = "gl-mt300n:lan";
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
};
 
wlan {
label = "gl-mt300n:wlan";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
 
};
 
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
 
BTN_0 {
label = "BTN_0";
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
 
BTN_1 {
label = "BTN_1";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
};
};
};
 
&gpio0 {
status = "okay";
};
 
&gpio1 {
status = "okay";
};
 
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
 
&spi0 {
status = "okay";
 
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
 
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
};
 
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
 
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
 
partition@50000 {
label = "firmware";
reg = <0x50000 0xf80000>;
};
 
partition@ff0000 {
label = "art";
reg = <0xff0000 0x10000>;
};
};
};
 
&ehci {
status = "okay";
};
 
&ohci {
status = "okay";
};
 
&ethernet {
mtd-mac-address = <&factory 0x4000>;
mediatek,portmap = "wllll";
};
 
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
 
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "wled","ephy","i2c";
ralink,function = "gpio";
};
};
};