| /branches/18.06.1/target/linux/ramips/dts/rt5350.dtsi |
|---|
| @@ -0,0 +1,391 @@ |
|---|
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "ralink,rt5350-soc"; |
| |
| cpus { |
| cpu@0 { |
| compatible = "mips,mips24KEc"; |
| }; |
| }; |
| |
| chosen { |
| bootargs = "console=ttyS0,57600"; |
| }; |
| |
| cpuintc: cpuintc@0 { |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| compatible = "mti,cpu-interrupt-controller"; |
| }; |
| |
| aliases { |
| spi0 = &spi0; |
| spi1 = &spi1; |
| serial0 = &uartlite; |
| }; |
| |
| palmbus: palmbus@10000000 { |
| compatible = "palmbus"; |
| reg = <0x10000000 0x200000>; |
| ranges = <0x0 0x10000000 0x1FFFFF>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| sysc: sysc@0 { |
| compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc", "syscon"; |
| reg = <0x0 0x100>; |
| }; |
| |
| timer: timer@100 { |
| compatible = "ralink,rt5350-timer", "ralink,rt2880-timer"; |
| reg = <0x100 0x20>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <1>; |
| }; |
| |
| watchdog: watchdog@120 { |
| compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt"; |
| reg = <0x120 0x10>; |
| |
| resets = <&rstctrl 8>; |
| reset-names = "wdt"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <1>; |
| }; |
| |
| intc: intc@200 { |
| compatible = "ralink,rt5350-intc", "ralink,rt2880-intc"; |
| reg = <0x200 0x100>; |
| |
| resets = <&rstctrl 19>; |
| reset-names = "intc"; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&cpuintc>; |
| interrupts = <2>; |
| }; |
| |
| memc: memc@300 { |
| compatible = "ralink,rt5350-memc", "ralink,rt3050-memc"; |
| reg = <0x300 0x100>; |
| |
| resets = <&rstctrl 20>; |
| reset-names = "mc"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <3>; |
| }; |
| |
| uart: uart@500 { |
| compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a"; |
| reg = <0x500 0x100>; |
| |
| resets = <&rstctrl 12>; |
| reset-names = "uart"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <5>; |
| |
| reg-shift = <2>; |
| |
| status = "disabled"; |
| }; |
| |
| gpio0: gpio@600 { |
| compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; |
| reg = <0x600 0x34>; |
| |
| resets = <&rstctrl 13>; |
| reset-names = "pio"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <6>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| ralink,gpio-base = <0>; |
| ralink,num-gpios = <22>; |
| ralink,register-map = [ 00 04 08 0c |
| 20 24 28 2c |
| 30 34 ]; |
| }; |
| |
| gpio1: gpio@660 { |
| compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; |
| reg = <0x660 0x24>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <6>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| ralink,gpio-base = <22>; |
| ralink,num-gpios = <6>; |
| ralink,register-map = [ 00 04 08 0c |
| 10 14 18 1c |
| 20 24 ]; |
| |
| status = "disabled"; |
| }; |
| |
| i2c: i2c@900 { |
| compatible = "ralink,rt2880-i2c"; |
| reg = <0x900 0x100>; |
| |
| resets = <&rstctrl 16>; |
| reset-names = "i2c"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c_pins>; |
| |
| status = "disabled"; |
| }; |
| |
| i2s: i2s@a00 { |
| compatible = "ralink,rt3352-i2s"; |
| reg = <0xa00 0x100>; |
| |
| resets = <&rstctrl 17>; |
| reset-names = "i2s"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <10>; |
| |
| txdma-req = <2>; |
| rxdma-req = <3>; |
| |
| dmas = <&gdma 4>, |
| <&gdma 6>; |
| dma-names = "tx", "rx"; |
| |
| status = "disabled"; |
| }; |
| |
| spi0: spi@b00 { |
| compatible = "ralink,rt5350-spi", "ralink,rt2880-spi"; |
| reg = <0xb00 0x40>; |
| |
| resets = <&rstctrl 18>; |
| reset-names = "spi"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi_pins>; |
| |
| status = "disabled"; |
| }; |
| |
| spi1: spi@b40 { |
| compatible = "ralink,rt5350-spi", "ralink,rt2880-spi"; |
| reg = <0xb40 0x60>; |
| |
| resets = <&rstctrl 18>; |
| reset-names = "spi"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi_cs1>; |
| |
| status = "disabled"; |
| }; |
| |
| uartlite: uartlite@c00 { |
| compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a"; |
| reg = <0xc00 0x100>; |
| |
| resets = <&rstctrl 19>; |
| reset-names = "uartl"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <12>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uartlite_pins>; |
| |
| reg-shift = <2>; |
| }; |
| |
| systick: systick@d00 { |
| compatible = "ralink,rt5350-systick", "ralink,cevt-systick"; |
| reg = <0xd00 0x10>; |
| |
| interrupt-parent = <&cpuintc>; |
| interrupts = <7>; |
| }; |
| |
| pcm: pcm@2000 { |
| compatible = "ralink,rt5350-pcm"; |
| reg = <0x2000 0x800>; |
| |
| resets = <&rstctrl 11>; |
| reset-names = "pcm"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <4>; |
| |
| status = "disabled"; |
| }; |
| |
| gdma: gdma@2800 { |
| compatible = "ralink,rt3883-gdma"; |
| reg = <0x2800 0x800>; |
| |
| resets = <&rstctrl 14>; |
| reset-names = "dma"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <7>; |
| |
| #dma-cells = <1>; |
| #dma-channels = <16>; |
| #dma-requests = <16>; |
| |
| status = "disabled"; |
| }; |
| }; |
| |
| pinctrl: pinctrl { |
| compatible = "ralink,rt2880-pinmux"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&state_default>; |
| |
| state_default: pinctrl0 { |
| }; |
| |
| i2c_pins: i2c { |
| i2c { |
| ralink,group = "i2c"; |
| ralink,function = "i2c"; |
| }; |
| }; |
| |
| spi_pins: spi { |
| spi { |
| ralink,group = "spi"; |
| ralink,function = "spi"; |
| }; |
| }; |
| |
| phy_led_pins: phy_led { |
| phy_led { |
| ralink,group = "led"; |
| ralink,function = "led"; |
| }; |
| }; |
| |
| uartlite_pins: uartlite { |
| uart { |
| ralink,group = "uartlite"; |
| ralink,function = "uartlite"; |
| }; |
| }; |
| |
| uartf_pins: uartf { |
| uartf { |
| ralink,group = "uartf"; |
| ralink,function = "uartf"; |
| }; |
| }; |
| |
| spi_cs1: spi1 { |
| spi1 { |
| ralink,group = "spi_cs1"; |
| ralink,function = "spi_cs1"; |
| }; |
| }; |
| }; |
| |
| rstctrl: rstctrl { |
| compatible = "ralink,rt5350-reset", "ralink,rt2880-reset"; |
| #reset-cells = <1>; |
| }; |
| |
| clkctrl: clkctrl { |
| compatible = "ralink,rt2880-clock"; |
| #clock-cells = <1>; |
| }; |
| |
| usbphy: usbphy { |
| compatible = "ralink,rt3352-usbphy"; |
| #phy-cells = <0>; |
| |
| ralink,sysctl = <&sysc>; |
| resets = <&rstctrl 22 &rstctrl 25>; |
| reset-names = "host", "device"; |
| clocks = <&clkctrl 18>; |
| clock-names = "host"; |
| }; |
| |
| ethernet: ethernet@10100000 { |
| compatible = "ralink,rt5350-eth"; |
| reg = <0x10100000 0x10000>; |
| |
| resets = <&rstctrl 21 &rstctrl 23>; |
| reset-names = "fe", "esw"; |
| |
| interrupt-parent = <&cpuintc>; |
| interrupts = <5>; |
| |
| mediatek,switch = <&esw>; |
| }; |
| |
| esw: esw@10110000 { |
| compatible = "ralink,rt5350-esw", "ralink,rt3050-esw"; |
| reg = <0x10110000 0x8000>; |
| |
| resets = <&rstctrl 23>; |
| reset-names = "esw"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <17>; |
| }; |
| |
| wmac: wmac@10180000 { |
| compatible = "ralink,rt5350-wmac", "ralink,rt2880-wmac"; |
| reg = <0x10180000 0x40000>; |
| |
| interrupt-parent = <&cpuintc>; |
| interrupts = <6>; |
| |
| ralink,eeprom = "soc_wmac.eeprom"; |
| }; |
| |
| ehci: ehci@101c0000 { |
| compatible = "generic-ehci"; |
| reg = <0x101c0000 0x1000>; |
| |
| phys = <&usbphy>; |
| phy-names = "usb"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <18>; |
| }; |
| |
| ohci: ohci@101c1000 { |
| compatible = "generic-ohci"; |
| reg = <0x101c1000 0x1000>; |
| |
| phys = <&usbphy>; |
| phy-names = "usb"; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <18>; |
| }; |
| }; |
