/branches/18.06.1/target/linux/ramips/dts/WSR-600.dts |
@@ -0,0 +1,191 @@ |
/dts-v1/; |
|
#include "mt7621.dtsi" |
|
#include <dt-bindings/gpio/gpio.h> |
#include <dt-bindings/input/input.h> |
|
/ { |
compatible = "buffalo,wsr-600dhp", "mediatek,mt7621-soc"; |
model = "Buffalo WSR-600DHP"; |
|
aliases { |
led-boot = &led_power; |
led-failsafe = &led_power; |
led-running = &led_power; |
led-upgrade = &led_power; |
}; |
|
memory@0 { |
device_type = "memory"; |
reg = <0x0 0x4000000>; |
}; |
|
chosen { |
bootargs = "console=ttyS0,57600"; |
}; |
|
leds { |
compatible = "gpio-leds"; |
|
led_power: power { |
label = "wsr-600:green:power"; |
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; |
}; |
|
wifi_o { |
label = "wsr-600:orange:wifi"; |
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; |
}; |
|
diag { |
label = "wsr-600:orange:diag"; |
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; |
}; |
|
wifi_g { |
label = "wsr-600:green:wifi"; |
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; |
}; |
|
router_o { |
label = "wsr-600:orange:router"; |
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; |
}; |
|
router_g { |
label = "wsr-600:green:router"; |
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; |
}; |
|
internet_o { |
label = "wsr-600:orange:internet"; |
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; |
}; |
|
internet_g { |
label = "wsr-600:green:internet"; |
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; |
}; |
}; |
|
keys { |
compatible = "gpio-keys-polled"; |
poll-interval = <20>; |
|
power { |
label = "power"; |
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_POWER>; |
}; |
|
reset { |
label = "reset"; |
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RESTART>; |
}; |
|
aoss { |
label = "aoss"; |
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_WPS_BUTTON>; |
}; |
|
auto { |
label = "mode"; |
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; |
linux,code = <BTN_0>; |
linux,input-type = <EV_SW>; |
}; |
|
ap { |
label = "ap"; |
gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; |
linux,code = <BTN_0>; |
linux,input-type = <EV_SW>; |
}; |
|
router { |
label = "router"; |
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; |
linux,code = <BTN_0>; |
linux,input-type = <EV_SW>; |
}; |
}; |
|
gpio_poweroff { |
compatible = "gpio-poweroff"; |
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; |
}; |
}; |
|
&spi0 { |
status = "okay"; |
|
m25p80@0 { |
compatible = "jedec,spi-nor"; |
reg = <0>; |
spi-max-frequency = <10000000>; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
#size-cells = <1>; |
|
partition@0 { |
label = "u-boot"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
|
partition@30000 { |
label = "u-boot-env"; |
reg = <0x30000 0x10000>; |
read-only; |
}; |
|
factory: partition@40000 { |
label = "factory"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
|
partition@50000 { |
compatible = "denx,uimage"; |
label = "firmware"; |
reg = <0x50000 0xfb0000>; |
}; |
}; |
}; |
}; |
|
&pinctrl { |
state_default: pinctrl0 { |
gpio { |
ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci"; |
ralink,function = "gpio"; |
}; |
}; |
}; |
|
&pcie { |
status = "okay"; |
}; |
|
&pcie0 { |
rt5592@0,0 { |
reg = <0x0000 0 0 0 0>; |
ralink,mtd-eeprom = <&factory 0x8000>; |
}; |
}; |
|
&pcie1 { |
mt76@0,0 { |
reg = <0x0000 0 0 0 0>; |
mediatek,mtd-eeprom = <&factory 0x0000>; |
}; |
}; |
|
&xhci { |
status = "disabled"; |
}; |