OpenWrt

Subversion Repositories:
Compare Path: Rev
With Path: Rev
?path1? @ 2  →  ?path2? @ 3
/branches/18.06.1/target/linux/ramips/dts/WIZFI630A.dts
@@ -9,21 +9,14 @@
compatible = "wiznet,wizfi630a", "ralink,rt5350-soc";
model = "WIZnet WizFi630A";
 
aliases {
led-boot = &led_run;
led-failsafe = &led_run;
led-running = &led_run;
led-upgrade = &led_run;
};
 
chosen {
bootargs = "console=ttyS1,115200";
};
 
leds {
gpio-leds {
compatible = "gpio-leds";
 
led_run: run {
run {
label = "wizfi630a::run";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
};
@@ -44,8 +37,10 @@
};
};
 
keys {
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
 
reset {
@@ -59,7 +54,7 @@
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
 
scm1 {
label = "SCM1";
gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
@@ -82,42 +77,37 @@
status = "okay";
 
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
 
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
partition@0 {
#size-cells = <1>;
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
 
partition@0 {
#size-cells = <1>;
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
#size-cells = <1>;
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
 
partition@30000 {
#size-cells = <1>;
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
#size-cells = <1>;
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
 
factory: partition@40000 {
#size-cells = <1>;
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
 
partition@50000 {
compatible = "denx,uimage";
#size-cells = <1>;
label = "firmware";
reg = <0x50000 0xfb0000>;
};
partition@50000 {
#size-cells = <1>;
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};