OpenWrt
/branches/18.06.1/target/linux/ramips/dts/WIZFI630A.dts |
@@ -9,21 +9,14 @@ |
compatible = "wiznet,wizfi630a", "ralink,rt5350-soc"; |
model = "WIZnet WizFi630A"; |
|
aliases { |
led-boot = &led_run; |
led-failsafe = &led_run; |
led-running = &led_run; |
led-upgrade = &led_run; |
}; |
|
chosen { |
bootargs = "console=ttyS1,115200"; |
}; |
|
leds { |
gpio-leds { |
compatible = "gpio-leds"; |
|
led_run: run { |
run { |
label = "wizfi630a::run"; |
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; |
}; |
@@ -44,8 +37,10 @@ |
}; |
}; |
|
keys { |
gpio-keys-polled { |
compatible = "gpio-keys-polled"; |
#address-cells = <1>; |
#size-cells = <0>; |
poll-interval = <20>; |
|
reset { |
@@ -59,7 +54,7 @@ |
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_WPS_BUTTON>; |
}; |
|
|
scm1 { |
label = "SCM1"; |
gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; |
@@ -82,42 +77,37 @@ |
status = "okay"; |
|
m25p80@0 { |
#address-cells = <1>; |
#size-cells = <1>; |
compatible = "jedec,spi-nor"; |
reg = <0>; |
spi-max-frequency = <10000000>; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
partition@0 { |
#size-cells = <1>; |
label = "uboot"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
|
partition@0 { |
#size-cells = <1>; |
label = "uboot"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
partition@30000 { |
#size-cells = <1>; |
label = "uboot-env"; |
reg = <0x30000 0x10000>; |
read-only; |
}; |
|
partition@30000 { |
#size-cells = <1>; |
label = "uboot-env"; |
reg = <0x30000 0x10000>; |
read-only; |
}; |
factory: partition@40000 { |
#size-cells = <1>; |
label = "factory"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
|
factory: partition@40000 { |
#size-cells = <1>; |
label = "factory"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
|
partition@50000 { |
compatible = "denx,uimage"; |
#size-cells = <1>; |
label = "firmware"; |
reg = <0x50000 0xfb0000>; |
}; |
partition@50000 { |
#size-cells = <1>; |
label = "firmware"; |
reg = <0x50000 0xfb0000>; |
}; |
}; |
}; |