OpenWrt
/branches/18.06.1/target/linux/ramips/dts/W2914NSV2.dtsi |
@@ -10,8 +10,10 @@ |
bootargs = "console=ttyS0,57600"; |
}; |
|
keys { |
gpio-keys-polled { |
compatible = "gpio-keys-polled"; |
#address-cells = <1>; |
#size-cells = <0>; |
poll-interval = <20>; |
|
reset { |
@@ -36,38 +38,34 @@ |
status = "okay"; |
|
m25p80@0 { |
#address-cells = <1>; |
#size-cells = <1>; |
compatible = "jedec,spi-nor"; |
reg = <0>; |
spi-max-frequency = <10000000>; |
m25p,chunked-io = <32>; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
#size-cells = <1>; |
partition@0 { |
label = "u-boot"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
|
partition@0 { |
label = "u-boot"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
partition@30000 { |
label = "u-boot-env"; |
reg = <0x30000 0x10000>; |
read-only; |
}; |
|
partition@30000 { |
label = "u-boot-env"; |
reg = <0x30000 0x10000>; |
read-only; |
}; |
factory: partition@40000 { |
label = "factory"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
|
factory: partition@40000 { |
label = "factory"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
|
partition@50000 { |
compatible = "denx,uimage"; |
label = "firmware"; |
reg = <0x50000 0xfb0000>; |
}; |
partition@50000 { |
label = "firmware"; |
reg = <0x50000 0xfb0000>; |
}; |
}; |
}; |
@@ -74,22 +72,22 @@ |
|
&pcie { |
status = "okay"; |
}; |
|
&pcie0 { |
wifi@0,0 { |
compatible = "pci14c3,7603"; |
reg = <0x0000 0 0 0 0>; |
mediatek,mtd-eeprom = <&factory 0x0000>; |
pcie0 { |
wifi@14c3,7603 { |
compatible = "pci14c3,7603"; |
reg = <0x0000 0 0 0 0>; |
mediatek,mtd-eeprom = <&factory 0x0000>; |
}; |
}; |
}; |
|
&pcie1 { |
wifi@0,0 { |
compatible = "pci14c3,7662"; |
reg = <0x0000 0 0 0 0>; |
mediatek,mtd-eeprom = <&factory 0x8000>; |
ieee80211-freq-limit = <5000000 6000000>; |
pcie1 { |
wifi@14c3,7662 { |
compatible = "pci14c3,7662"; |
reg = <0x0000 0 0 0 0>; |
mediatek,mtd-eeprom = <&factory 0x8000>; |
ieee80211-freq-limit = <5000000 6000000>; |
}; |
}; |
}; |
|