/branches/18.06.1/target/linux/ramips/dts/W2914NSV2.dtsi |
@@ -0,0 +1,107 @@ |
#include "mt7621.dtsi" |
|
#include <dt-bindings/gpio/gpio.h> |
#include <dt-bindings/input/input.h> |
|
/ { |
compatible = "wevo,w2914ns-v2", "mediatek,mt7621-soc"; |
|
chosen { |
bootargs = "console=ttyS0,57600"; |
}; |
|
keys { |
compatible = "gpio-keys-polled"; |
poll-interval = <20>; |
|
reset { |
label = "reset"; |
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RESTART>; |
}; |
|
wps { |
label = "wps"; |
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_WPS_BUTTON>; |
}; |
}; |
}; |
|
&xhci { |
status = "okay"; |
}; |
|
&spi0 { |
status = "okay"; |
|
m25p80@0 { |
compatible = "jedec,spi-nor"; |
reg = <0>; |
spi-max-frequency = <10000000>; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
#size-cells = <1>; |
|
partition@0 { |
label = "u-boot"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
|
partition@30000 { |
label = "u-boot-env"; |
reg = <0x30000 0x10000>; |
read-only; |
}; |
|
factory: partition@40000 { |
label = "factory"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
|
partition@50000 { |
compatible = "denx,uimage"; |
label = "firmware"; |
reg = <0x50000 0xfb0000>; |
}; |
}; |
}; |
}; |
|
&pcie { |
status = "okay"; |
}; |
|
&pcie0 { |
wifi@0,0 { |
compatible = "pci14c3,7603"; |
reg = <0x0000 0 0 0 0>; |
mediatek,mtd-eeprom = <&factory 0x0000>; |
}; |
}; |
|
&pcie1 { |
wifi@0,0 { |
compatible = "pci14c3,7662"; |
reg = <0x0000 0 0 0 0>; |
mediatek,mtd-eeprom = <&factory 0x8000>; |
ieee80211-freq-limit = <5000000 6000000>; |
}; |
}; |
|
ðernet { |
mtd-mac-address = <&factory 0xe000>; |
}; |
|
&pinctrl { |
state_default: pinctrl0 { |
gpio { |
ralink,group = "wdt", "rgmii2", "jtag", "mdio"; |
ralink,function = "gpio"; |
}; |
}; |
}; |