OpenWrt
| /branches/18.06.1/target/linux/ramips/dts/W150M.dts |
|---|
| @@ -9,51 +9,39 @@ |
| compatible = "tenda,w150m", "ralink,rt3050-soc"; |
| model = "Tenda W150M"; |
| aliases { |
| led-boot = &led_ap; |
| led-failsafe = &led_ap; |
| led-running = &led_ap; |
| led-upgrade = &led_ap; |
| }; |
| cfi@1f000000 { |
| compatible = "cfi-flash"; |
| reg = <0x1f000000 0x800000>; |
| bank-width = <2>; |
| device-width = <2>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| partition@30000 { |
| label = "u-boot-env"; |
| reg = <0x30000 0x10000>; |
| read-only; |
| }; |
| partition@30000 { |
| label = "u-boot-env"; |
| reg = <0x30000 0x10000>; |
| read-only; |
| }; |
| factory: partition@40000 { |
| label = "factory"; |
| reg = <0x40000 0x10000>; |
| read-only; |
| }; |
| factory: partition@40000 { |
| label = "factory"; |
| reg = <0x40000 0x10000>; |
| read-only; |
| }; |
| partition@50000 { |
| compatible = "denx,uimage"; |
| label = "firmware"; |
| reg = <0x50000 0x3c8000>; |
| }; |
| partition@50000 { |
| label = "firmware"; |
| reg = <0x50000 0x3c8000>; |
| }; |
| }; |
| leds { |
| gpio-leds { |
| compatible = "gpio-leds"; |
| 3grouter { |
| @@ -61,7 +49,7 @@ |
| gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
| }; |
| led_ap: ap { |
| ap { |
| label = "w150m:blue:ap"; |
| gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; |
| }; |
| @@ -87,8 +75,10 @@ |
| }; |
| }; |
| keys { |
| gpio-keys-polled { |
| compatible = "gpio-keys-polled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| poll-interval = <20>; |
| reset { |