OpenWrt
/branches/18.06.1/target/linux/ramips/dts/TL-WR902ACV3.dts |
@@ -9,15 +9,10 @@ |
compatible = "tplink,tl-wr902ac-v3", "mediatek,mt7628an-soc"; |
model = "TP-Link TL-WR902AC v3"; |
|
aliases { |
led-boot = &led_power; |
led-failsafe = &led_power; |
led-running = &led_power; |
led-upgrade = &led_power; |
}; |
|
keys { |
gpio-keys-polled { |
compatible = "gpio-keys-polled"; |
#address-cells = <1>; |
#size-cells = <0>; |
poll-interval = <20>; |
|
reset { |
@@ -45,7 +40,7 @@ |
}; |
}; |
|
leds { |
gpio-leds { |
compatible = "gpio-leds"; |
|
lan { |
@@ -53,7 +48,7 @@ |
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; |
}; |
|
led_power: power { |
power { |
label = "tl-wr902ac-v3:green:power"; |
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; |
}; |
@@ -61,8 +56,6 @@ |
usb { |
label = "tl-wr902ac-v3:green:usb"; |
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; |
trigger-sources = <&ohci_port1>, <&ehci_port1>; |
linux,default-trigger = "usbport"; |
}; |
|
wan { |
@@ -101,14 +94,15 @@ |
|
&pcie { |
status = "okay"; |
}; |
|
&pcie0 { |
mt76@0,0 { |
reg = <0x0000 0 0 0 0>; |
mediatek,mtd-eeprom = <&factory 0x28000>; |
ieee80211-freq-limit = <5000000 6000000>; |
mtd-mac-address = <&factory 0xf100>; |
mtd-mac-address-increment = <(-1)>; |
pcie-bridge { |
mt76@1,0 { |
reg = <0x0000 0 0 0 0>; |
device_type = "pci"; |
mediatek,mtd-eeprom = <&factory 0x28000>; |
ieee80211-freq-limit = <5000000 6000000>; |
mtd-mac-address = <&factory 0xf100>; |
mtd-mac-address-increment = <(-1)>; |
}; |
}; |
}; |