OpenWrt
| /branches/18.06.1/target/linux/ramips/dts/TL-WR840NV5.dts |
|---|
| @@ -9,13 +9,6 @@ |
| compatible = "tplink,tl-wr840n-v5", "mediatek,mt7628an-soc"; |
| model = "TP-Link TL-WR840N v5"; |
| aliases { |
| led-boot = &led_power_green; |
| led-failsafe = &led_power_green; |
| led-running = &led_power_green; |
| led-upgrade = &led_power_green; |
| }; |
| chosen { |
| bootargs = "console=ttyS0,115200"; |
| }; |
| @@ -25,8 +18,10 @@ |
| reg = <0x0 0x4000000>; |
| }; |
| keys { |
| gpio-keys-polled { |
| compatible = "gpio-keys-polled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| poll-interval = <20>; |
| reset { |
| @@ -36,10 +31,10 @@ |
| }; |
| }; |
| /* LED used is dual-color,dual lead LED */ |
| leds { |
| gpio-leds { |
| compatible = "gpio-leds"; |
| led_power_green: power { |
| power { |
| label = "tl-wr840n-v5:green:power"; |
| gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; |
| }; |
| @@ -55,32 +50,28 @@ |
| status = "okay"; |
| m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; |
| m25p,chunked-io = <32>; |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partition@0 { |
| label = "boot"; |
| reg = <0x0 0x20000>; |
| read-only; |
| }; |
| partition@0 { |
| label = "boot"; |
| reg = <0x0 0x20000>; |
| read-only; |
| }; |
| partition@20000 { |
| label = "firmware"; |
| reg = <0x20000 0x3d0000>; |
| }; |
| partition@20000 { |
| compatible = "tplink,firmware"; |
| label = "firmware"; |
| reg = <0x20000 0x3d0000>; |
| }; |
| factory: partition@3f0000 { |
| label = "factory"; |
| reg = <0x3f0000 0x10000>; |
| read-only; |
| }; |
| factory: partition@3f0000 { |
| label = "factory"; |
| reg = <0x3f0000 0x10000>; |
| read-only; |
| }; |
| }; |
| }; |
| @@ -96,7 +87,7 @@ |
| &wmac { |
| status = "okay"; |
| mtd-mac-address = <&factory 0xf100>; |
| mediatek,mtd-eeprom = <&factory 0x0>; |
| mediatek,mtd-eeprom = <&factory 0x10000>; |
| }; |
| ðernet { |