/branches/18.06.1/target/linux/ramips/dts/TEW-692GR.dts |
@@ -0,0 +1,151 @@ |
/dts-v1/; |
|
#include "rt3883.dtsi" |
|
#include <dt-bindings/gpio/gpio.h> |
#include <dt-bindings/input/input.h> |
|
/ { |
compatible = "trendnet,tew-692gr", "ralink,rt3883-soc"; |
model = "TRENDnet TEW-692GR"; |
|
aliases { |
led-boot = &led_wps_green; |
led-failsafe = &led_wps_green; |
led-running = &led_wps_green; |
led-upgrade = &led_wps_green; |
}; |
|
nor-flash@1c000000 { |
compatible = "cfi-flash"; |
reg = <0x1c000000 0x800000>; |
bank-width = <2>; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
#size-cells = <1>; |
|
partition@0 { |
reg = <0x0 0x0030000>; |
label = "u-boot"; |
read-only; |
}; |
|
partition@30000 { |
reg = <0x00030000 0x00010000>; |
label = "u-boot-env"; |
read-only; |
}; |
|
factory: partition@40000 { |
reg = <0x00040000 0x00010000>; |
label = "factory"; |
read-only; |
}; |
|
partition@50000 { |
compatible = "denx,uimage"; |
reg = <0x00050000 0x007b0000>; |
label = "firmware"; |
}; |
}; |
}; |
|
keys { |
compatible = "gpio-keys-polled"; |
poll-interval = <100>; |
|
reset { |
label = "reset"; |
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RESTART>; |
}; |
|
wps { |
label = "wps"; |
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_WPS_BUTTON>; |
}; |
}; |
|
leds { |
compatible = "gpio-leds"; |
|
wps { |
label = "tew-692gr:orange:wps"; |
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; |
}; |
|
led_wps_green: wps2 { |
label = "tew-692gr:green:wps"; |
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
}; |
}; |
}; |
|
&gpio1 { |
status = "okay"; |
}; |
|
&pinctrl { |
state_default: pinctrl0 { |
gpio { |
ralink,group = "spi", "i2c", "jtag", "uartf"; |
ralink,function = "gpio"; |
}; |
}; |
}; |
|
ðernet { |
status = "okay"; |
mtd-mac-address = <&factory 0x4>; |
|
port@0 { |
phy-handle = <&phy0>; |
phy-mode = "rgmii"; |
}; |
|
mdio-bus { |
status = "okay"; |
|
phy0: ethernet-phy@0 { |
reg = <0>; |
phy-mode = "rgmii"; |
|
qca,ar8327-initvals = < |
0x04 0x07600000 /* PORT0 PAD MODE CTRL */ |
0x0c 0x07600000 /* PORT6 PAD MODE CTRL */ |
0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */ |
0x50 0xc437c437 /* LED Control Register 0 */ |
0x54 0xc337c337 /* LED Control Register 1 */ |
0x58 0x00000000 /* LED Control Register 2 */ |
0x5c 0x03ffff00 /* LED Control Register 3 */ |
0x7c 0x0000007e /* PORT0_STATUS */ |
0x94 0x0000007e /* PORT6 STATUS */ |
>; |
}; |
}; |
}; |
|
&pci { |
status = "okay"; |
}; |
|
&pci1 { |
status = "okay"; |
|
wifi@0,0 { |
compatible = "pci0,0"; |
reg = < 0x10000 0 0 0 0 >; |
ralink,2ghz = <0>; |
}; |
}; |
|
&wmac { |
status = "okay"; |
ralink,mtd-eeprom = <&factory 0x0>; |
ralink,5ghz = <0>; |
mtd-mac-address = <&factory 0x4>; |
mtd-mac-address-increment = <3>; |
}; |