| /branches/18.06.1/target/linux/ramips/dts/RE6500.dts |
|---|
| @@ -0,0 +1,135 @@ |
|---|
| /dts-v1/; |
| |
| #include "mt7621.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| compatible = "linksys,re6500", "mediatek,mt7621-soc"; |
| model = "Linksys RE6500"; |
| |
| aliases { |
| led-boot = &led_power; |
| led-failsafe = &led_power; |
| led-running = &led_power; |
| led-upgrade = &led_power; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x4000000>; |
| }; |
| |
| chosen { |
| bootargs = "console=ttyS0,57600"; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| wifi { |
| label = "re6500:orange:wifi"; |
| gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led_power: power { |
| label = "re6500:white:power"; |
| gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| keys { |
| compatible = "gpio-keys-polled"; |
| poll-interval = <20>; |
| |
| wps { |
| label = "wps"; |
| gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_WPS_BUTTON>; |
| }; |
| |
| reset { |
| label = "reset"; |
| gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; |
| linux,code = <KEY_RESTART>; |
| }; |
| }; |
| }; |
| |
| &spi0 { |
| status = "okay"; |
| |
| m25p80@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| |
| partition@30000 { |
| label = "u-boot-env"; |
| reg = <0x30000 0x10000>; |
| read-only; |
| }; |
| |
| factory: partition@40000 { |
| label = "factory"; |
| reg = <0x40000 0x10000>; |
| read-only; |
| }; |
| |
| partition@50000 { |
| compatible = "denx,uimage"; |
| label = "firmware"; |
| reg = <0x50000 0x7b0000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pinctrl { |
| state_default: pinctrl0 { |
| gpio { |
| ralink,group = "i2c", "uart2", "uart3", "rgmii2"; |
| ralink,function = "gpio"; |
| }; |
| }; |
| }; |
| |
| &pcie { |
| status = "okay"; |
| }; |
| |
| &pcie0 { |
| mt76@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| mediatek,mtd-eeprom = <&factory 0x0000>; |
| ieee80211-freq-limit = <5000000 6000000>; |
| }; |
| }; |
| |
| &pcie1 { |
| mt76@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| mediatek,mtd-eeprom = <&factory 0x8000>; |
| ieee80211-freq-limit = <2400000 2500000>; |
| }; |
| }; |
| |
| ðernet { |
| mtd-mac-address = <&factory 0x2e>; |
| }; |
| |
| &xhci { |
| status = "disabled"; |
| }; |
