| /branches/18.06.1/target/linux/ramips/dts/R6120.dts |
|---|
| @@ -0,0 +1,148 @@ |
|---|
| /dts-v1/; |
| |
| #include "mt7628an.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| compatible = "netgear,r6120", "mediatek,mt7628an-soc"; |
| model = "Netgear R6120"; |
| |
| aliases { |
| led-boot = &led_power; |
| led-failsafe = &led_power; |
| led-running = &led_power; |
| led-upgrade = &led_power; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x4000000>; |
| }; |
| |
| keys { |
| compatible = "gpio-keys-polled"; |
| poll-interval = <20>; |
| |
| reset { |
| label = "reset"; |
| gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_RESTART>; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| lan { |
| label = "r6120:green:lan"; |
| gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led_power: power { |
| label = "r6120:green:power"; |
| gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; |
| }; |
| |
| wlan { |
| label = "r6120:green:wlan2g"; |
| gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; |
| }; |
| |
| wlan_orange { |
| label = "r6120:orange:wlan2g"; |
| gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; |
| }; |
| |
| wan { |
| label = "r6120:green:wan"; |
| gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; |
| }; |
| |
| wan_orange { |
| label = "r6120:orange:wan"; |
| gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| }; |
| |
| &pinctrl { |
| state_default: pinctrl0 { |
| gpio { |
| ralink,group = "p0led_an", "p1led_an", "p2led_an", |
| "p3led_an", "p4led_an", "wdt", "wled_an"; |
| ralink,function = "gpio"; |
| }; |
| }; |
| }; |
| |
| &spi0 { |
| status = "okay"; |
| |
| flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x40000>; |
| read-only; |
| }; |
| |
| factory: partition@40000 { |
| label = "factory"; |
| reg = <0x40000 0x20000>; |
| read-only; |
| }; |
| |
| partition@60000 { |
| label = "nvram"; |
| reg = <0x60000 0x30000>; |
| read-only; |
| }; |
| |
| partition@90000 { |
| compatible = "denx,uimage"; |
| label = "firmware"; |
| reg = <0x90000 0xf60000>; |
| }; |
| |
| partition@ff0000 { |
| label = "reserved"; |
| reg = <0xff0000 0x10000>; |
| read-only; |
| }; |
| }; |
| }; |
| }; |
| |
| &wmac { |
| status = "okay"; |
| mtd-mac-address = <&factory 0x4>; |
| mediatek,mtd-eeprom = <&factory 0x0>; |
| }; |
| |
| ðernet { |
| mtd-mac-address = <&factory 0x4>; |
| }; |
| |
| &pcie { |
| status = "okay"; |
| }; |
| |
| &pcie0 { |
| wifi@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| mediatek,mtd-eeprom = <&factory 0x8000>; |
| ieee80211-freq-limit = <5000000 6000000>; |
| mtd-mac-address = <&factory 0x4>; |
| mtd-mac-address-increment = <(2)>; |
| }; |
| }; |
