OpenWrt
| /branches/18.06.1/target/linux/ramips/dts/OY-0001.dts |
|---|
| @@ -9,21 +9,14 @@ |
| compatible = "ohyeah,oy-0001", "ralink,mt7620a-soc"; |
| model = "OY-0001"; |
| aliases { |
| led-boot = &led_power; |
| led-failsafe = &led_power; |
| led-running = &led_power; |
| led-upgrade = &led_power; |
| }; |
| chosen { |
| bootargs = "console=ttyS0,115200"; |
| }; |
| leds { |
| gpio-leds { |
| compatible = "gpio-leds"; |
| led_power: powerled { |
| powerled { |
| label = "oy-0001:green:power"; |
| gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; |
| }; |
| @@ -34,8 +27,10 @@ |
| }; |
| }; |
| keys { |
| gpio-keys-polled { |
| compatible = "gpio-keys-polled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| poll-interval = <20>; |
| s1 { |
| @@ -58,38 +53,33 @@ |
| status = "okay"; |
| m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| partition@30000 { |
| label = "u-boot-env"; |
| reg = <0x30000 0x10000>; |
| read-only; |
| }; |
| partition@30000 { |
| label = "u-boot-env"; |
| reg = <0x30000 0x10000>; |
| read-only; |
| }; |
| factory: partition@40000 { |
| label = "factory"; |
| reg = <0x40000 0x10000>; |
| read-only; |
| }; |
| factory: partition@40000 { |
| label = "factory"; |
| reg = <0x40000 0x10000>; |
| read-only; |
| }; |
| partition@50000 { |
| compatible = "denx,uimage"; |
| label = "firmware"; |
| reg = <0x50000 0xfb0000>; |
| }; |
| partition@50000 { |
| label = "firmware"; |
| reg = <0x50000 0xfb0000>; |
| }; |
| }; |
| }; |
| @@ -97,7 +87,7 @@ |
| &pinctrl { |
| state_default: pinctrl0 { |
| gpio { |
| ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled"; |
| ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd"; |
| ralink,function = "gpio"; |
| }; |
| }; |
| @@ -128,3 +118,7 @@ |
| &ohci { |
| status = "okay"; |
| }; |
| &pcie { |
| status = "okay"; |
| }; |