OpenWrt
/branches/18.06.1/target/linux/ramips/dts/MZK-WDPR.dts |
@@ -0,0 +1,93 @@ |
/dts-v1/; |
|
#include "rt3050.dtsi" |
|
#include <dt-bindings/gpio/gpio.h> |
|
/ { |
compatible = "planex,mzk-wdpr", "ralink,rt3052-soc"; |
model = "Planex MZK-WDPR"; |
|
chosen { |
bootargs = "console=ttyS0,115200"; |
}; |
|
cfi@1f000000 { |
compatible = "cfi-flash"; |
reg = <0x1f000000 0x800000>; |
|
bank-width = <2>; |
device-width = <2>; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
#size-cells = <1>; |
|
partition@0 { |
label = "u-boot"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
|
partition@30000 { |
label = "u-boot-env"; |
reg = <0x30000 0x10000>; |
read-only; |
}; |
|
factory: partition@40000 { |
label = "factory"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
|
partition@7f0000 { |
label = "Data3G"; |
reg = <0x7f0000 0x10000>; |
read-only; |
}; |
|
partition@50000 { |
compatible = "denx,uimage"; |
label = "firmware"; |
reg = <0x50000 0x680000>; |
}; |
}; |
}; |
|
gpio-export { |
compatible = "gpio-export"; |
|
lcd_ctrl1 { |
gpio-export,name = "lcd_ctrl1"; |
gpio-export,output = <0>; |
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; |
}; |
}; |
}; |
|
&pinctrl { |
state_default: pinctrl0 { |
gpio { |
ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; |
ralink,function = "gpio"; |
}; |
}; |
}; |
|
ðernet { |
mtd-mac-address = <&factory 0x28>; |
}; |
|
&esw { |
mediatek,portmap = <0x2f>; |
}; |
|
&wmac { |
ralink,mtd-eeprom = <&factory 0>; |
}; |
|
&otg { |
status = "okay"; |
}; |