OpenWrt
/branches/18.06.1/target/linux/ramips/dts/MIWIFI-NANO.dts |
@@ -0,0 +1,104 @@ |
/dts-v1/; |
|
#include "mt7628an.dtsi" |
|
#include <dt-bindings/gpio/gpio.h> |
#include <dt-bindings/input/input.h> |
|
/ { |
compatible = "xiaomi,miwifi-nano", "mediatek,mt7628an-soc"; |
model = "MiWiFi Nano"; |
|
chosen { |
bootargs = "console=ttyS0,115200"; |
}; |
|
memory@0 { |
device_type = "memory"; |
reg = <0x0 0x4000000>; |
}; |
|
gpio-leds { |
compatible = "gpio-leds"; |
|
status_blue { |
label = "miwifi-nano:blue:status"; |
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
}; |
status_red { |
label = "miwifi-nano:red:status"; |
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; |
}; |
status_amber { |
label = "miwifi-nano:amber:status"; |
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; |
}; |
}; |
|
gpio-keys { |
compatible = "gpio-keys-polled"; |
#address-cells = <1>; |
#size-cells = <0>; |
poll-interval = <20>; |
|
reset { |
label = "reset"; |
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RESTART>; |
}; |
}; |
}; |
|
&pinctrl { |
state_default: pinctrl0 { |
gpio { |
ralink,group = "refclk", "wled_an", "gpio"; |
ralink,function = "gpio"; |
}; |
}; |
}; |
|
&wmac { |
status = "okay"; |
ralink,mtd-eeprom = <&factory 0x4>; |
}; |
|
ðernet { |
mtd-mac-address = <&factory 0x28>; |
}; |
|
&spi0 { |
status = "okay"; |
|
m25p80@0 { |
#address-cells = <1>; |
#size-cells = <1>; |
compatible = "jedec,spi-nor"; |
reg = <0>; |
spi-max-frequency = <10000000>; |
m25p,chunked-io = <32>; |
|
partition@0 { |
label = "u-boot"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
|
partition@30000 { |
label = "u-boot-env"; |
reg = <0x30000 0x10000>; |
read-only; |
}; |
|
factory: partition@40000 { |
label = "factory"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
|
partition@50000 { |
label = "firmware"; |
reg = <0x50000 0xfb0000>; |
}; |
}; |
}; |