OpenWrt
| /branches/18.06.1/target/linux/ramips/dts/MIWIFI-NANO.dts |
|---|
| @@ -0,0 +1,104 @@ |
| /dts-v1/; |
| #include "mt7628an.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| / { |
| compatible = "xiaomi,miwifi-nano", "mediatek,mt7628an-soc"; |
| model = "MiWiFi Nano"; |
| chosen { |
| bootargs = "console=ttyS0,115200"; |
| }; |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x4000000>; |
| }; |
| gpio-leds { |
| compatible = "gpio-leds"; |
| status_blue { |
| label = "miwifi-nano:blue:status"; |
| gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
| }; |
| status_red { |
| label = "miwifi-nano:red:status"; |
| gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; |
| }; |
| status_amber { |
| label = "miwifi-nano:amber:status"; |
| gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| gpio-keys { |
| compatible = "gpio-keys-polled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| poll-interval = <20>; |
| reset { |
| label = "reset"; |
| gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_RESTART>; |
| }; |
| }; |
| }; |
| &pinctrl { |
| state_default: pinctrl0 { |
| gpio { |
| ralink,group = "refclk", "wled_an", "gpio"; |
| ralink,function = "gpio"; |
| }; |
| }; |
| }; |
| &wmac { |
| status = "okay"; |
| ralink,mtd-eeprom = <&factory 0x4>; |
| }; |
| ðernet { |
| mtd-mac-address = <&factory 0x28>; |
| }; |
| &spi0 { |
| status = "okay"; |
| m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; |
| m25p,chunked-io = <32>; |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| partition@30000 { |
| label = "u-boot-env"; |
| reg = <0x30000 0x10000>; |
| read-only; |
| }; |
| factory: partition@40000 { |
| label = "factory"; |
| reg = <0x40000 0x10000>; |
| read-only; |
| }; |
| partition@50000 { |
| label = "firmware"; |
| reg = <0x50000 0xfb0000>; |
| }; |
| }; |
| }; |