OpenWrt
/branches/18.06.1/target/linux/ramips/dts/M2M.dts |
@@ -9,21 +9,14 @@ |
compatible = "intenso,memory2move", "ralink,rt5350-soc"; |
model = "Intenso Memory 2 Move"; |
|
aliases { |
led-boot = &led_wifi; |
led-failsafe = &led_wifi; |
led-running = &led_wifi; |
led-upgrade = &led_wifi; |
}; |
|
chosen { |
bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5"; |
}; |
|
leds { |
gpio-leds { |
compatible = "gpio-leds"; |
|
led_wifi: wifi { |
wifi { |
label = "m2m:blue:wifi"; |
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; |
}; |
@@ -34,8 +27,10 @@ |
}; |
}; |
|
keys { |
gpio-keys-polled { |
compatible = "gpio-keys-polled"; |
#address-cells = <1>; |
#size-cells = <0>; |
poll-interval = <20>; |
|
power { |
@@ -56,38 +51,33 @@ |
status = "okay"; |
|
m25p80@0 { |
#address-cells = <1>; |
#size-cells = <1>; |
compatible = "jedec,spi-nor"; |
reg = <0>; |
spi-max-frequency = <10000000>; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
#size-cells = <1>; |
partition@0 { |
label = "Bootloader"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
|
partition@0 { |
label = "Bootloader"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
partition@30000 { |
label = "Config"; |
reg = <0x30000 0x10000>; |
read-only; |
}; |
|
partition@30000 { |
label = "Config"; |
reg = <0x30000 0x10000>; |
read-only; |
}; |
factory: partition@40000 { |
label = "Factory"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
|
factory: partition@40000 { |
label = "Factory"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
|
partition@50000 { |
compatible = "denx,uimage"; |
label = "firmware"; |
reg = <0x50000 0x7b0000>; |
}; |
partition@50000 { |
label = "firmware"; |
reg = <0x50000 0x7b0000>; |
}; |
}; |
}; |