/branches/18.06.1/target/linux/ramips/dts/HC5X61.dtsi |
@@ -0,0 +1,136 @@ |
#include "mt7620a.dtsi" |
|
#include <dt-bindings/gpio/gpio.h> |
#include <dt-bindings/input/input.h> |
|
/ { |
compatible = "hiwifi,hc5x61", "ralink,mt7620a-soc"; |
|
chosen { |
bootargs = "console=ttyS0,115200"; |
}; |
|
keys { |
compatible = "gpio-keys-polled"; |
poll-interval = <20>; |
|
reset { |
label = "reset"; |
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RESTART>; |
}; |
}; |
|
gpio_export { |
compatible = "gpio-export"; |
#size-cells = <0>; |
|
usbpower { |
gpio-export,name = "usbpower"; |
gpio-export,output = <1>; |
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; |
}; |
}; |
}; |
|
&sysc { |
ralink,gpiomux = "i2c", "jtag"; |
ralink,uartmux = "gpio"; |
ralink,wdtmux = <1>; |
}; |
|
&gpio0 { |
status = "okay"; |
}; |
|
&gpio2 { |
status = "okay"; |
}; |
|
&gpio3 { |
status = "okay"; |
}; |
|
&spi0 { |
status = "okay"; |
|
m25p80@0 { |
compatible = "jedec,spi-nor"; |
reg = <0>; |
spi-max-frequency = <10000000>; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
#size-cells = <1>; |
|
partition@0 { |
label = "u-boot"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
|
partition@30000 { |
label = "u-boot-env"; |
reg = <0x30000 0x10000>; |
read-only; |
}; |
|
factory: partition@40000 { |
label = "factory"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
|
partition@50000 { |
compatible = "denx,uimage"; |
label = "firmware"; |
reg = <0x50000 0xf80000>; |
}; |
|
partition@fd0000 { |
label = "hwf_config"; |
reg = <0xfd0000 0x10000>; |
read-only; |
}; |
|
bdinfo: partition@fe0000 { |
label = "bdinfo"; |
reg = <0xfe0000 0x10000>; |
read-only; |
}; |
|
partition@ff0000 { |
label = "backup"; |
reg = <0xff0000 0x10000>; |
read-only; |
}; |
}; |
}; |
}; |
|
ðernet { |
pinctrl-names = "default"; |
pinctrl-0 = <&ephy_pins>; |
mtd-mac-address = <&factory 0x4>; |
mediatek,portmap = "wllll"; |
}; |
|
&sdhci { |
status = "okay"; |
}; |
|
&wmac { |
ralink,mtd-eeprom = <&factory 0>; |
pinctrl-names = "default"; |
pinctrl-0 = <&pa_pins>; |
}; |
|
&pinctrl { |
state_default: pinctrl0 { |
gpio { |
ralink,group = "uartf", "wled"; |
ralink,function = "gpio"; |
}; |
}; |
}; |