/branches/18.06.1/target/linux/ramips/dts/FONERA20N.dts |
@@ -0,0 +1,157 @@ |
/dts-v1/; |
|
#include "rt3050.dtsi" |
|
#include <dt-bindings/gpio/gpio.h> |
#include <dt-bindings/input/input.h> |
|
/ { |
compatible = "fon,fonera20n", "ralink,rt3052-soc"; |
model = "La Fonera 2.0N"; |
|
aliases { |
led-boot = &led_power; |
led-failsafe = &led_power; |
led-running = &led_power; |
led-upgrade = &led_power; |
}; |
|
cfi@1f000000 { |
compatible = "cfi-flash"; |
reg = <0x1f000000 0x800000>; |
bank-width = <2>; |
device-width = <2>; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
#size-cells = <1>; |
|
partition@0 { |
label = "u-boot"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
|
partition@30000 { |
label = "u-boot-env"; |
reg = <0x30000 0x10000>; |
read-only; |
}; |
|
factory: partition@40000 { |
label = "factory"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
|
partition@50000 { |
compatible = "denx,uimage"; |
label = "firmware"; |
reg = <0x50000 0x7b0000>; |
}; |
}; |
}; |
|
leds { |
compatible = "gpio-leds"; |
|
wifi { |
label = "fonera20n:orange:wifi"; |
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; |
}; |
|
led_power: power { |
label = "fonera20n:green:power"; |
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; |
}; |
|
usb { |
label = "fonera20n:orange:usb"; |
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; |
trigger-sources = <&otg_port1>; |
linux,default-trigger = "usbport"; |
}; |
}; |
|
keys { |
compatible = "gpio-keys-polled"; |
poll-interval = <20>; |
|
reset { |
label = "reset"; |
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RESTART>; |
}; |
|
switch { |
label = "switch"; |
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RFKILL>; |
linux,input-type = <EV_SW>; |
}; |
}; |
}; |
|
&pinctrl { |
state_default: pinctrl0 { |
gpio { |
ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf"; |
ralink,function = "gpio"; |
}; |
}; |
}; |
|
ðernet { |
mtd-mac-address = <&factory 0x28>; |
}; |
|
&esw { |
#address-cells = <1>; |
#size-cells = <0>; |
|
mediatek,portmap = <0x2f>; |
|
port@0 { |
compatible = "swconfig,port"; |
reg = <0>; |
swconfig,segment = "lan"; |
swconfig,portmap = <0 4>; |
}; |
|
port@1 { |
compatible = "swconfig,port"; |
reg = <1>; |
swconfig,segment = "lan"; |
swconfig,portmap = <1 3>; |
}; |
|
port@2 { |
compatible = "swconfig,port"; |
reg = <2>; |
swconfig,segment = "lan"; |
swconfig,portmap = <2 2>; |
}; |
|
port@3 { |
compatible = "swconfig,port"; |
reg = <3>; |
swconfig,segment = "lan"; |
swconfig,portmap = <3 1>; |
}; |
|
port@4 { |
compatible = "swconfig,port"; |
reg = <4>; |
swconfig,segment = "wan"; |
swconfig,portmap = <4 0>; |
}; |
}; |
|
&wmac { |
ralink,mtd-eeprom = <&factory 0>; |
}; |
|
&otg { |
status = "okay"; |
}; |