/branches/18.06.1/target/linux/ramips/dts/DWR-512-B.dts |
@@ -0,0 +1,149 @@ |
/dts-v1/; |
|
#include "rt5350.dtsi" |
|
#include <dt-bindings/gpio/gpio.h> |
#include <dt-bindings/input/input.h> |
|
/ { |
compatible = "dlink,dwr-512-b", "ralink,rt5350-soc"; |
model = "D-Link DWR-512 B"; |
|
aliases { |
led-boot = &led_status; |
led-failsafe = &led_status; |
led-running = &led_status; |
led-upgrade = &led_status; |
}; |
|
keys { |
compatible = "gpio-keys-polled"; |
poll-interval = <20>; |
|
wps { |
label = "wps"; |
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_WPS_BUTTON>; |
}; |
|
reset { |
label = "reset"; |
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RESTART>; |
}; |
}; |
|
leds { |
compatible = "gpio-leds"; |
|
sms { |
label = "dwr-512-b:green:sms"; |
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; |
}; |
led_status: status { |
label = "dwr-512-b:green:status"; |
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; |
}; |
2g { |
label = "dwr-512-b:green:2g"; |
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; |
}; |
3g { |
label = "dwr-512-b:green:3g"; |
gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; |
}; |
sstrengthr { |
label = "dwr-512-b:red:sigstrength"; |
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; |
}; |
sstrengthg { |
label = "dwr-512-b:green:sigstrength"; |
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; |
}; |
}; |
|
gpio-export { |
compatible = "gpio-export"; |
#size-cells = <0>; |
|
slic_int { |
gpio-export,name = "slic_int"; |
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; |
}; |
modem3g_enable { |
gpio-export,name = "modem3g_enable"; |
gpio-export,output = <1>; |
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; |
}; |
}; |
}; |
|
&spi0 { |
status = "okay"; |
|
flash@0 { |
compatible = "jedec,spi-nor"; |
reg = <0>; |
spi-max-frequency = <30000000>; |
m25p,fast-read; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
#size-cells = <1>; |
|
partition@0 { |
label = "jboot"; |
reg = <0x0 0x10000>; |
read-only; |
}; |
|
partition@10000 { |
compatible = "amit,jimage"; |
label = "firmware"; |
reg = <0x10000 0x7e0000>; |
}; |
|
config: partition@7f0000 { |
label = "config"; |
reg = <0x7f0000 0x10000>; |
}; |
}; |
}; |
}; |
|
&spi1 { |
status = "okay"; |
|
spidev@0 { |
#address-cells = <1>; |
#size-cells = <1>; |
compatible = "siliconlabs,si3210"; |
|
reg = <0>; |
spi-max-frequency = <1000000>; |
}; |
}; |
|
&pinctrl { |
state_default: pinctrl0 { |
gpio { |
ralink,group = "i2c", "jtag", "uartf"; |
ralink,function = "gpio"; |
}; |
}; |
}; |
|
&esw { |
mediatek,portmap = <0x2f>; |
}; |
|
ðernet { |
mtd-mac-address = <&config 0xe07e>; |
}; |
|
&wmac { |
ralink,mtd-eeprom = <&config 0xe08a>; |
ralink,led-polarity = <1>; |
mtd-mac-address = <&config 0xe07e>; |
}; |