/branches/18.06.1/target/linux/ramips/dts/DUZUN-DM06.dts |
@@ -0,0 +1,145 @@ |
/dts-v1/; |
|
#include "mt7628an.dtsi" |
|
#include <dt-bindings/gpio/gpio.h> |
#include <dt-bindings/input/input.h> |
|
/ { |
compatible = "duzun,dm06", "mediatek,mt7628an-soc"; |
model = "DuZun DM06"; |
|
memory@0 { |
device_type = "memory"; |
reg = <0x0 0x4000000>; |
}; |
|
keys { |
compatible = "gpio-keys-polled"; |
poll-interval = <100>; |
|
reset { |
label = "reset"; |
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RESTART>; |
}; |
|
wps { |
label = "wps"; |
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_WPS_BUTTON>; |
}; |
}; |
|
sound { |
compatible = "simple-audio-card"; |
simple-audio-card,name = "Audio-I2S"; |
simple-audio-card,format = "i2s"; |
simple-audio-card,bitclock-master = <&dailink0_master>; |
simple-audio-card,frame-master = <&dailink0_master>; |
simple-audio-card,widgets = |
"Headphone", "Headphones"; |
simple-audio-card,routing = |
"Headphones", "HP_L", |
"Headphones", "HP_R"; |
simple-audio-card,mclk-fs = <256>; |
|
simple-audio-card,cpu { |
sound-dai = <&i2s>; |
}; |
|
dailink0_master: simple-audio-card,codec { |
sound-dai = <&codec>; |
}; |
}; |
}; |
|
&pinctrl { |
state_default: pinctrl0 { |
gpio { |
ralink,group = "wdt", "uart1"; |
ralink,function = "gpio"; |
}; |
}; |
}; |
|
&gpio1 { |
status = "okay"; |
}; |
|
&i2c { |
status = "okay"; |
|
codec: wm8960@1a { |
#sound-dai-cells = <0>; |
compatible = "wlf,wm8960"; |
reg = <0x1a>; |
|
wlf,shared-lrclk; |
}; |
}; |
|
ðernet { |
mtd-mac-address = <&factory 0x4>; |
}; |
|
&esw { |
mediatek,portmap = <0x3>; |
mediatek,portdisable = <0x3c>; |
}; |
|
&i2s { |
#sound-dai-cells = <0>; |
status = "okay"; |
pinctrl-names = "default"; |
pinctrl-0 = <&i2s_pins>, <&refclk_pins>; |
}; |
|
&sdhci { |
status = "okay"; |
}; |
|
&gdma { |
status = "okay"; |
}; |
|
&spi0 { |
status = "okay"; |
|
m25p80@0 { |
compatible = "jedec,spi-nor"; |
reg = <0>; |
spi-max-frequency = <60000000>; |
m25p,fast-read; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
#size-cells = <1>; |
|
partition@0 { |
label = "u-boot"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
|
partition@30000 { |
label = "u-boot-env"; |
reg = <0x30000 0x10000>; |
read-only; |
}; |
|
factory: partition@40000 { |
label = "factory"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
|
partition@50000 { |
compatible = "denx,uimage"; |
label = "firmware"; |
reg = <0x50000 0x7b0000>; |
}; |
}; |
}; |
}; |