| /branches/18.06.1/target/linux/ramips/dts/DIR-860L-B1.dts |
|---|
| @@ -9,13 +9,6 @@ |
|---|
| compatible = "dlink,dir-860l-b1", "mediatek,mt7621-soc"; |
| model = "D-Link DIR-860L B1"; |
| |
| aliases { |
| led-boot = &led_power_green; |
| led-failsafe = &led_power_green; |
| led-running = &led_power_green; |
| led-upgrade = &led_power_green; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x8000000>; |
| @@ -25,7 +18,7 @@ |
|---|
| bootargs = "console=ttyS0,57600"; |
| }; |
| |
| leds { |
| gpio-leds { |
| compatible = "gpio-leds"; |
| |
| power { |
| @@ -33,7 +26,7 @@ |
|---|
| gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led_power_green: power2 { |
| power2 { |
| label = "dir-860l-b1:green:power"; |
| gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; |
| }; |
| @@ -49,8 +42,10 @@ |
|---|
| }; |
| }; |
| |
| keys { |
| gpio-keys-polled { |
| compatible = "gpio-keys-polled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| poll-interval = <20>; |
| |
| reset { |
| @@ -71,50 +66,46 @@ |
|---|
| status = "okay"; |
| |
| m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; |
| m25p,chunked-io = <32>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| partition@30000 { |
| label = "u-boot-env"; |
| reg = <0x30000 0x4000>; |
| read-only; |
| }; |
| |
| partition@30000 { |
| label = "u-boot-env"; |
| reg = <0x30000 0x4000>; |
| read-only; |
| }; |
| radio: partition@34000 { |
| label = "radio"; |
| reg = <0x34000 0x4000>; |
| read-only; |
| }; |
| |
| radio: partition@34000 { |
| label = "radio"; |
| reg = <0x34000 0x4000>; |
| read-only; |
| }; |
| factory: partition@38000 { |
| label = "factory"; |
| reg = <0x38000 0x8000>; |
| read-only; |
| }; |
| |
| factory: partition@38000 { |
| label = "factory"; |
| reg = <0x38000 0x8000>; |
| read-only; |
| }; |
| partition@40000 { |
| label = "defaults"; |
| reg = <0x40000 0x10000>; |
| read-only; |
| }; |
| |
| partition@40000 { |
| label = "defaults"; |
| reg = <0x40000 0x10000>; |
| read-only; |
| }; |
| |
| partition@50000 { |
| compatible = "seama"; |
| label = "firmware"; |
| reg = <0x50000 0xfb0000>; |
| }; |
| partition@50000 { |
| label = "firmware"; |
| reg = <0x50000 0xfb0000>; |
| }; |
| }; |
| }; |
| @@ -121,21 +112,23 @@ |
|---|
| |
| &pcie { |
| status = "okay"; |
| }; |
| |
| &pcie0 { |
| mt76@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| mediatek,mtd-eeprom = <&radio 0x2000>; |
| ieee80211-freq-limit = <5000000 6000000>; |
| pcie0 { |
| mt76@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| device_type = "pci"; |
| mediatek,mtd-eeprom = <&radio 0x2000>; |
| ieee80211-freq-limit = <5000000 6000000>; |
| }; |
| }; |
| }; |
| |
| &pcie1 { |
| mt76@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| mediatek,mtd-eeprom = <&radio 0>; |
| ieee80211-freq-limit = <2400000 2500000>; |
| pcie1 { |
| mt76@1,0 { |
| reg = <0x0000 0 0 0 0>; |
| device_type = "pci"; |
| mediatek,mtd-eeprom = <&radio 0>; |
| ieee80211-freq-limit = <2400000 2500000>; |
| }; |
| }; |
| }; |
| |
