OpenWrt
| /branches/18.06.1/target/linux/ramips/dts/DCH-M225.dts |
|---|
| @@ -9,15 +9,10 @@ |
| compatible = "dlink,dch-m225", "ralink,mt7620a-soc"; |
| model = "D-Link DCH-M225"; |
| aliases { |
| led-boot = &led_power; |
| led-failsafe = &led_power; |
| led-running = &led_power; |
| led-upgrade = &led_power; |
| }; |
| keys { |
| gpio-keys-polled { |
| compatible = "gpio-keys-polled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| poll-interval = <100>; |
| wps { |
| @@ -33,13 +28,12 @@ |
| }; |
| }; |
| leds { |
| gpio-leds { |
| compatible = "gpio-leds"; |
| led_power: power { |
| power { |
| label = "dch-m225:green:power"; |
| gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; |
| default-state = "on"; |
| }; |
| status { |
| @@ -103,57 +97,52 @@ |
| status = "okay"; |
| m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <80000000>; |
| m25p,fast-read; |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| partition@30000 { |
| label = "u-boot-env"; |
| reg = <0x30000 0x4000>; |
| read-only; |
| }; |
| partition@30000 { |
| label = "u-boot-env"; |
| reg = <0x30000 0x4000>; |
| read-only; |
| }; |
| factory: partition@34000 { |
| label = "factory"; |
| reg = <0x34000 0x4000>; |
| read-only; |
| }; |
| factory: partition@34000 { |
| label = "factory"; |
| reg = <0x34000 0x4000>; |
| read-only; |
| }; |
| nvram: partition@38000 { |
| label = "nvram"; |
| reg = <0x38000 0x8000>; |
| read-only; |
| }; |
| nvram: partition@38000 { |
| label = "nvram"; |
| reg = <0x38000 0x8000>; |
| read-only; |
| }; |
| partition@40000 { |
| label = "devconf"; |
| reg = <0x40000 0x10000>; |
| read-only; |
| }; |
| partition@40000 { |
| label = "devconf"; |
| reg = <0x40000 0x10000>; |
| read-only; |
| }; |
| partition@50000 { |
| label = "upgrade_rec"; |
| reg = <0x50000 0x100000>; |
| read-only; |
| }; |
| partition@50000 { |
| label = "upgrade_rec"; |
| reg = <0x50000 0x100000>; |
| read-only; |
| }; |
| partition@150000 { |
| compatible = "seama"; |
| label = "firmware"; |
| reg = <0x150000 0x6b0000>; |
| }; |
| partition@150000 { |
| label = "firmware"; |
| reg = <0x150000 0x6b0000>; |
| }; |
| }; |
| }; |