OpenWrt
/branches/18.06.1/target/linux/ramips/dts/DCH-M225.dts/DCH-M225.dts |
@@ -9,15 +9,10 @@ |
compatible = "dlink,dch-m225", "ralink,mt7620a-soc"; |
model = "D-Link DCH-M225"; |
|
aliases { |
led-boot = &led_power; |
led-failsafe = &led_power; |
led-running = &led_power; |
led-upgrade = &led_power; |
}; |
|
keys { |
gpio-keys-polled { |
compatible = "gpio-keys-polled"; |
#address-cells = <1>; |
#size-cells = <0>; |
poll-interval = <100>; |
|
wps { |
@@ -33,13 +28,12 @@ |
}; |
}; |
|
leds { |
gpio-leds { |
compatible = "gpio-leds"; |
|
led_power: power { |
power { |
label = "dch-m225:green:power"; |
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; |
default-state = "on"; |
}; |
|
status { |
@@ -103,57 +97,52 @@ |
status = "okay"; |
|
m25p80@0 { |
#address-cells = <1>; |
#size-cells = <1>; |
compatible = "jedec,spi-nor"; |
reg = <0>; |
spi-max-frequency = <80000000>; |
m25p,fast-read; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
#size-cells = <1>; |
partition@0 { |
label = "u-boot"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
|
partition@0 { |
label = "u-boot"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
partition@30000 { |
label = "u-boot-env"; |
reg = <0x30000 0x4000>; |
read-only; |
}; |
|
partition@30000 { |
label = "u-boot-env"; |
reg = <0x30000 0x4000>; |
read-only; |
}; |
factory: partition@34000 { |
label = "factory"; |
reg = <0x34000 0x4000>; |
read-only; |
}; |
|
factory: partition@34000 { |
label = "factory"; |
reg = <0x34000 0x4000>; |
read-only; |
}; |
nvram: partition@38000 { |
label = "nvram"; |
reg = <0x38000 0x8000>; |
read-only; |
}; |
|
nvram: partition@38000 { |
label = "nvram"; |
reg = <0x38000 0x8000>; |
read-only; |
}; |
partition@40000 { |
label = "devconf"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
|
partition@40000 { |
label = "devconf"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
partition@50000 { |
label = "upgrade_rec"; |
reg = <0x50000 0x100000>; |
read-only; |
}; |
|
partition@50000 { |
label = "upgrade_rec"; |
reg = <0x50000 0x100000>; |
read-only; |
}; |
|
partition@150000 { |
compatible = "seama"; |
label = "firmware"; |
reg = <0x150000 0x6b0000>; |
}; |
partition@150000 { |
label = "firmware"; |
reg = <0x150000 0x6b0000>; |
}; |
}; |
}; |