| /branches/18.06.1/target/linux/ramips/dts/CY-SWR1100.dts |
|---|
| @@ -0,0 +1,152 @@ |
|---|
| /dts-v1/; |
| |
| #include "rt3883.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| compatible = "samsung,cy-swr1100", "ralink,rt3883-soc"; |
| model = "Samsung CY-SWR1100"; |
| |
| aliases { |
| led-boot = &led_wps; |
| led-failsafe = &led_wps; |
| }; |
| |
| nor-flash@1c000000 { |
| compatible = "cfi-flash"; |
| reg = <0x1c000000 0x800000>; |
| bank-width = <2>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "uboot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| |
| partition@30000 { |
| label = "uboot-env"; |
| reg = <0x30000 0x4000>; |
| read-only; |
| }; |
| |
| factory: partition@34000 { |
| label = "factory"; |
| reg = <0x34000 0x4000>; |
| read-only; |
| }; |
| |
| partition@38000 { |
| label = "nvram"; |
| reg = <0x38000 0x8000>; |
| read-only; |
| }; |
| |
| partition@40000 { |
| label = "devdata"; |
| reg = <0x40000 0x10000>; |
| }; |
| |
| partition@50000 { |
| compatible = "seama"; |
| label = "firmware"; |
| reg = <0x50000 0x7b0000>; |
| }; |
| }; |
| }; |
| |
| rtl8367 { |
| compatible = "realtek,rtl8367"; |
| gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>; |
| gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>; |
| realtek,extif0 = <1 0 1 1 1 1 1 1 2>; |
| }; |
| |
| keys { |
| compatible = "gpio-keys-polled"; |
| poll-interval = <100>; |
| |
| reset { |
| label = "reset"; |
| gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_RESTART>; |
| }; |
| |
| wps { |
| label = "wps"; |
| gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_WPS_BUTTON>; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| led_wps: wps { |
| label = "cy-swr1100:blue:wps"; |
| gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; |
| }; |
| |
| usb { |
| label = "cy-swr1100:blue:usb"; |
| gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; |
| trigger-sources = <&ohci_port1>, <&ehci_port1>; |
| linux,default-trigger = "usbport"; |
| }; |
| }; |
| }; |
| |
| &gpio1 { |
| status = "okay"; |
| }; |
| |
| &pinctrl { |
| state_default: pinctrl0 { |
| gpio { |
| ralink,group = "i2c", "spi"; |
| ralink,function = "gpio"; |
| }; |
| }; |
| }; |
| |
| ðernet { |
| port@0 { |
| mediatek,fixed-link = <1000 1 1 1>; |
| phy-mode = "rgmii"; |
| }; |
| }; |
| |
| &pci { |
| status = "okay"; |
| }; |
| |
| &pci1 { |
| status = "okay"; |
| |
| wifi@0,0 { |
| compatible = "pci0,0"; |
| reg = <0x10000 0 0 0 0>; |
| ralink,5ghz = <0>; |
| ralink,mtd-eeprom = <&factory 0x2000>; |
| }; |
| }; |
| |
| &wmac { |
| status = "okay"; |
| ralink,2ghz = <0>; |
| ralink,mtd-eeprom = <&factory 0>; |
| }; |
| |
| &ehci { |
| status = "okay"; |
| }; |
| |
| &ohci { |
| status = "okay"; |
| }; |
