/branches/18.06.1/target/linux/ramips/dts/BR-6478AC-V2.dts |
@@ -0,0 +1,216 @@ |
/* |
* Device Tree file for the Edimax BR-6478AC V2 |
* based on Linksys E1700 |
* |
* Copyright (C) 2016 Rohan Murch <rohan.murch@gmail.com> |
* Copyright (C) 2016 Hans Ulli Kroll <ulli.kroll@googlemail.com> |
* Copyright (C) 2017 James McKenzie <openwrt@madingley.org> |
* |
* This file is licensed under the terms of the GNU General Public |
* License version 2. This program is licensed "as is" without any |
* warranty of any kind, whether express or implied. |
*/ |
|
/dts-v1/; |
|
#include "mt7620a.dtsi" |
|
#include <dt-bindings/gpio/gpio.h> |
#include <dt-bindings/input/input.h> |
|
/ { |
compatible = "edimax,br-6478ac-v2", "ralink,mt7620a-soc"; |
model = "Edimax BR-6478AC v2"; |
|
aliases { |
led-boot = &led_power; |
led-failsafe = &led_power; |
led-running = &led_power; |
led-upgrade = &led_power; |
}; |
|
chosen { |
bootargs = "console=ttyS0,57600"; |
}; |
|
keys { |
compatible = "gpio-keys-polled"; |
poll-interval = <20>; |
|
reset_wps { |
label = "reset_wps"; |
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RESTART>; |
}; |
}; |
|
leds { |
compatible = "gpio-leds"; |
|
led_power: power { |
label = "br-6478ac-v2:white:power"; |
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
}; |
internet { |
label = "br-6478ac-v2:blue:internet"; |
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; |
}; |
wlan { |
label = "br-6478ac-v2:blue:wlan"; |
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; |
}; |
usb { |
label = "br-6478ac-v2:blue:usb"; |
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; |
trigger-sources = <&ohci_port1>, <&ehci_port1>; |
linux,default-trigger = "usbport"; |
}; |
}; |
|
|
gpio_export { |
compatible = "gpio-export"; |
#size-cells = <0>; |
usb-power { |
gpio-export,name="usb-power"; |
gpio-export,output=<1>; |
gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; |
}; |
}; |
}; |
|
|
&gpio2 { |
status = "okay"; |
}; |
|
&spi0 { |
status = "okay"; |
|
flash@0 { |
compatible = "jedec,spi-nor"; |
reg = <0 0>; |
spi-max-frequency = <10000000>; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
#size-cells = <1>; |
|
partition@0 { |
label = "u-boot"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
|
partition@30000 { |
label = "u-boot-env"; |
reg = <0x30000 0x10000>; |
read-only; |
}; |
|
factory: partition@40000 { |
label = "factory"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
|
partition@50000 { |
label = "cimage"; |
reg = <0x50000 0x20000>; |
read-only; |
}; |
|
partition@70000 { |
compatible = "edimax,uimage"; |
label = "firmware"; |
reg = <0x00070000 0x00790000>; |
}; |
}; |
}; |
}; |
|
&pinctrl { |
state_default: pinctrl0 { |
gpio { |
ralink,group = "i2c", "uartf", "nd_sd"; |
ralink,function = "gpio"; |
}; |
}; |
}; |
|
ðernet { |
status = "okay"; |
mtd-mac-address = <&factory 0x4>; |
pinctrl-names = "default"; |
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; |
mediatek,portmap = "wllll"; |
|
port@5 { |
status = "okay"; |
mediatek,fixed-link = <1000 1 1 1>; |
phy-mode = "rgmii"; |
}; |
|
mdio-bus { |
status = "okay"; |
|
phy0: ethernet-phy@0 { |
reg = <0>; |
phy-mode = "rgmii"; |
}; |
|
phy1: ethernet-phy@1 { |
reg = <1>; |
phy-mode = "rgmii"; |
}; |
|
phy2: ethernet-phy@2 { |
reg = <2>; |
phy-mode = "rgmii"; |
}; |
|
phy3: ethernet-phy@3 { |
reg = <3>; |
phy-mode = "rgmii"; |
}; |
|
phy4: ethernet-phy@4 { |
reg = <4>; |
phy-mode = "rgmii"; |
}; |
|
phy1f: ethernet-phy@1f { |
reg = <0x1f>; |
phy-mode = "rgmii"; |
}; |
}; |
}; |
|
&gsw { |
mediatek,port4 = "gmac"; |
}; |
|
&wmac { |
ralink,mtd-eeprom = <&factory 0>; |
}; |
|
&pcie { |
status = "okay"; |
}; |
|
&pcie0 { |
wifi@0,0 { |
reg = <0x0000 0 0 0 0>; |
mediatek,mtd-eeprom = <&factory 0x8000>; |
mediatek,2ghz = <0>; |
}; |
}; |
|
&ehci { |
status = "okay"; |
}; |
|
&ohci { |
status = "okay"; |
}; |