/branches/18.06.1/target/linux/ramips/dts/BDCOM-WAP2100-SK.dts |
@@ -0,0 +1,153 @@ |
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
/dts-v1/; |
|
#include "mt7620a.dtsi" |
|
#include <dt-bindings/gpio/gpio.h> |
#include <dt-bindings/input/input.h> |
|
/ { |
compatible = "bdcom,wap2100-sk", "ralink,mt7620a-soc"; |
model = "BDCOM WAP2100-SK"; |
|
aliases { |
led-boot = &led_power; |
led-failsafe = &led_power; |
}; |
|
chosen { |
bootargs = "console=ttyS0,115200"; |
}; |
|
leds { |
compatible = "gpio-leds"; |
|
usb { |
label = "wap2100-sk:green:usb"; |
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
trigger-sources = <&ohci_port1>, <&ehci_port1>; |
linux,default-trigger = "usbport"; |
}; |
|
led_power: wps { |
label = "wap2100-sk:green:wps"; |
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; |
}; |
|
wlan2g { |
label = "wap2100-sk:green:wlan2g"; |
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; |
}; |
}; |
|
keys { |
compatible = "gpio-keys-polled"; |
poll-interval = <20>; |
|
wps { |
label = "wps"; |
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_WPS_BUTTON>; |
}; |
|
reset { |
label = "reset"; |
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RESTART>; |
}; |
}; |
}; |
|
&spi0 { |
status = "okay"; |
|
flash@0 { |
compatible = "jedec,spi-nor"; |
reg = <0>; |
spi-max-frequency = <10000000>; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
#size-cells = <1>; |
|
partition@0 { |
label = "u-boot"; |
reg = <0x0 0x30000>; |
read-only; |
}; |
|
partition@30000 { |
label = "u-boot-env"; |
reg = <0x30000 0x10000>; |
read-only; |
}; |
|
factory: partition@40000 { |
label = "factory"; |
reg = <0x40000 0x10000>; |
read-only; |
}; |
|
partition@50000 { |
compatible = "denx,uimage"; |
label = "firmware"; |
reg = <0x50000 0xf70000>; |
}; |
}; |
}; |
}; |
|
&gpio0 { |
status = "okay"; |
}; |
|
&gpio1 { |
status = "okay"; |
}; |
|
&gpio3 { |
status = "okay"; |
}; |
|
&sdhci { |
status = "okay"; |
}; |
|
&ehci { |
status = "okay"; |
}; |
|
&ohci { |
status = "okay"; |
}; |
|
ðernet { |
mtd-mac-address = <&factory 0x4>; |
mediatek,portmap = "llllw"; |
}; |
|
&wmac { |
ralink,mtd-eeprom = <&factory 0>; |
}; |
|
&pcie { |
status = "okay"; |
}; |
|
&pcie0 { |
wifi@0,0 { |
reg = <0x0000 0 0 0 0>; |
mediatek,mtd-eeprom = <&factory 0x8000>; |
ieee80211-freq-limit = <5000000 6000000>; |
}; |
}; |
|
&pinctrl { |
state_default: pinctrl0 { |
default { |
ralink,group = "spi refclk", "uartf", "wled"; |
ralink,function = "gpio"; |
}; |
}; |
}; |