| /branches/18.06.1/target/linux/ramips/dts/ArcherC50.dts |
|---|
| @@ -9,18 +9,11 @@ |
|---|
| compatible = "tplink,c50", "ralink,mt7620a-soc"; |
| model = "TP-Link Archer C50"; |
| |
| aliases { |
| led-boot = &led_power; |
| led-failsafe = &led_power; |
| led-running = &led_power; |
| led-upgrade = &led_power; |
| }; |
| |
| chosen { |
| bootargs = "console=ttyS0,115200"; |
| }; |
| |
| leds { |
| gpio-leds { |
| compatible = "gpio-leds"; |
| |
| lan { |
| @@ -28,7 +21,7 @@ |
|---|
| gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led_power: power { |
| power { |
| label = "c50:green:power"; |
| gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; |
| default-state = "on"; |
| @@ -37,8 +30,6 @@ |
|---|
| usb { |
| label = "c50:green:usb"; |
| gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; |
| trigger-sources = <&ohci_port1>, <&ehci_port1>; |
| linux,default-trigger = "usbport"; |
| }; |
| |
| wan { |
| @@ -67,8 +58,10 @@ |
|---|
| }; |
| }; |
| |
| keys { |
| gpio-keys-polled { |
| compatible = "gpio-keys-polled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| poll-interval = <20>; |
| |
| reset { |
| @@ -100,50 +93,45 @@ |
|---|
| status = "okay"; |
| |
| m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x20000>; |
| read-only; |
| }; |
| |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x20000>; |
| read-only; |
| }; |
| partition@20000 { |
| label = "firmware"; |
| reg = <0x20000 0x7a0000>; |
| }; |
| |
| partition@20000 { |
| compatible = "tplink,firmware"; |
| label = "firmware"; |
| reg = <0x20000 0x7a0000>; |
| }; |
| partition@7c0000 { |
| label = "config"; |
| reg = <0x7c0000 0x10000>; |
| read-only; |
| }; |
| |
| partition@7c0000 { |
| label = "config"; |
| reg = <0x7c0000 0x10000>; |
| read-only; |
| }; |
| rom: partition@7d0000 { |
| label = "rom"; |
| reg = <0x7d0000 0x10000>; |
| read-only; |
| }; |
| |
| rom: partition@7d0000 { |
| label = "rom"; |
| reg = <0x7d0000 0x10000>; |
| read-only; |
| }; |
| partition@7e0000 { |
| label = "romfile"; |
| reg = <0x7e0000 0x10000>; |
| read-only; |
| }; |
| |
| partition@7e0000 { |
| label = "romfile"; |
| reg = <0x7e0000 0x10000>; |
| read-only; |
| }; |
| |
| radio: partition@7f0000 { |
| label = "radio"; |
| reg = <0x7f0000 0x10000>; |
| read-only; |
| }; |
| radio: partition@7f0000 { |
| label = "radio"; |
| reg = <0x7f0000 0x10000>; |
| read-only; |
| }; |
| }; |
| }; |
| @@ -185,14 +173,15 @@ |
|---|
| |
| &pcie { |
| status = "okay"; |
| }; |
| |
| &pcie0 { |
| mt76@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| mediatek,mtd-eeprom = <&radio 32768>; |
| ieee80211-freq-limit = <5000000 6000000>; |
| mtd-mac-address = <&rom 0xf100>; |
| mtd-mac-address-increment = <(-1)>; |
| pcie-bridge { |
| mt76@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| device_type = "pci"; |
| mediatek,mtd-eeprom = <&radio 32768>; |
| ieee80211-freq-limit = <5000000 6000000>; |
| mtd-mac-address = <&rom 0xf100>; |
| mtd-mac-address-increment = <(-1)>; |
| }; |
| }; |
| }; |
