/branches/18.06.1/target/linux/ramips/dts/ArcherC50.dts |
@@ -0,0 +1,198 @@ |
/dts-v1/; |
|
#include "mt7620a.dtsi" |
|
#include <dt-bindings/input/input.h> |
#include <dt-bindings/gpio/gpio.h> |
|
/ { |
compatible = "tplink,c50", "ralink,mt7620a-soc"; |
model = "TP-Link Archer C50"; |
|
aliases { |
led-boot = &led_power; |
led-failsafe = &led_power; |
led-running = &led_power; |
led-upgrade = &led_power; |
}; |
|
chosen { |
bootargs = "console=ttyS0,115200"; |
}; |
|
leds { |
compatible = "gpio-leds"; |
|
lan { |
label = "c50:green:lan"; |
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; |
}; |
|
led_power: power { |
label = "c50:green:power"; |
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; |
default-state = "on"; |
}; |
|
usb { |
label = "c50:green:usb"; |
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; |
trigger-sources = <&ohci_port1>, <&ehci_port1>; |
linux,default-trigger = "usbport"; |
}; |
|
wan { |
label = "c50:green:wan"; |
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; |
}; |
|
wan_orange { |
label = "c50:orange:wan"; |
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; |
}; |
|
wlan5g { |
label = "c50:green:wlan5g"; |
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
}; |
|
wlan2g { |
label = "c50:green:wlan2g"; |
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; |
}; |
|
wps { |
label = "c50:green:wps"; |
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; |
}; |
}; |
|
keys { |
compatible = "gpio-keys-polled"; |
poll-interval = <20>; |
|
reset { |
label = "reset"; |
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RESTART>; |
}; |
|
rfkill { |
label = "rfkill"; |
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RFKILL>; |
}; }; |
}; |
|
&gpio1 { |
status = "okay"; |
}; |
|
&gpio2 { |
status = "okay"; |
}; |
|
&gpio3 { |
status = "okay"; |
}; |
|
&spi0 { |
status = "okay"; |
|
m25p80@0 { |
compatible = "jedec,spi-nor"; |
reg = <0>; |
spi-max-frequency = <10000000>; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
#size-cells = <1>; |
|
partition@0 { |
label = "u-boot"; |
reg = <0x0 0x20000>; |
read-only; |
}; |
|
partition@20000 { |
compatible = "tplink,firmware"; |
label = "firmware"; |
reg = <0x20000 0x7a0000>; |
}; |
|
partition@7c0000 { |
label = "config"; |
reg = <0x7c0000 0x10000>; |
read-only; |
}; |
|
rom: partition@7d0000 { |
label = "rom"; |
reg = <0x7d0000 0x10000>; |
read-only; |
}; |
|
partition@7e0000 { |
label = "romfile"; |
reg = <0x7e0000 0x10000>; |
read-only; |
}; |
|
radio: partition@7f0000 { |
label = "radio"; |
reg = <0x7f0000 0x10000>; |
read-only; |
}; |
}; |
}; |
}; |
|
&pinctrl { |
state_default: pinctrl0 { |
gpio { |
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "ephy", "spi refclk", "mdio", "wdt", "nd_sd"; |
ralink,function = "gpio"; |
}; |
}; |
}; |
|
ðernet { |
pinctrl-names = "default"; |
mtd-mac-address = <&rom 0xf100>; |
mediatek,portmap = "wllll"; |
}; |
|
&ehci { |
status = "okay"; |
}; |
|
&ohci { |
status = "okay"; |
}; |
|
&gsw { |
mediatek,port4 = "ephy"; |
}; |
|
&wmac { |
ralink,mtd-eeprom = <&radio 0>; |
mtd-mac-address = <&rom 0xf100>; |
mtd-mac-address-increment = <(-2)>; |
pinctrl-names = "default"; |
pinctrl-0 = <&pa_pins>; |
}; |
|
&pcie { |
status = "okay"; |
}; |
|
&pcie0 { |
mt76@0,0 { |
reg = <0x0000 0 0 0 0>; |
mediatek,mtd-eeprom = <&radio 32768>; |
ieee80211-freq-limit = <5000000 6000000>; |
mtd-mac-address = <&rom 0xf100>; |
mtd-mac-address-increment = <(-1)>; |
}; |
}; |