OpenWrt
| /branches/18.06.1/target/linux/ramips/dts/ArcherC20v4.dts |
|---|
| @@ -9,14 +9,7 @@ |
| compatible = "tplink,c20-v4", "mediatek,mt7628an-soc"; |
| model = "TP-Link Archer C20 v4"; |
| aliases { |
| led-boot = &led_power; |
| led-failsafe = &led_power; |
| led-running = &led_power; |
| led-upgrade = &led_power; |
| }; |
| leds { |
| gpio-leds { |
| compatible = "gpio-leds"; |
| lan { |
| @@ -24,7 +17,7 @@ |
| gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; |
| }; |
| led_power: power { |
| power { |
| label = "c20-v4:green:power"; |
| gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; |
| }; |
| @@ -38,7 +31,7 @@ |
| label = "c20-v4:orange:wan"; |
| gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
| }; |
| wlan5g { |
| label = "c20-v4:green:wlan5g"; |
| gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; |
| @@ -55,8 +48,10 @@ |
| }; |
| }; |
| keys { |
| gpio-keys-polled { |
| compatible = "gpio-keys-polled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| poll-interval = <20>; |
| reset { |
| @@ -92,14 +87,15 @@ |
| &pcie { |
| status = "okay"; |
| }; |
| &pcie0 { |
| mt76@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| mediatek,mtd-eeprom = <&factory 0x28000>; |
| ieee80211-freq-limit = <5000000 6000000>; |
| mtd-mac-address = <&factory 0xf100>; |
| mtd-mac-address-increment = <(-1)>; |
| pcie-bridge { |
| mt76@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| device_type = "pci"; |
| mediatek,mtd-eeprom = <&factory 0x28000>; |
| ieee80211-freq-limit = <5000000 6000000>; |
| mtd-mac-address = <&factory 0xf100>; |
| mtd-mac-address-increment = <(-1)>; |
| }; |
| }; |
| }; |