/branches/18.06.1/target/linux/ramips/dts/ArcherC20v4.dts |
@@ -0,0 +1,101 @@ |
/dts-v1/; |
|
#include "TPLINK-8M.dtsi" |
|
#include <dt-bindings/input/input.h> |
#include <dt-bindings/gpio/gpio.h> |
|
/ { |
compatible = "tplink,c20-v4", "mediatek,mt7628an-soc"; |
model = "TP-Link Archer C20 v4"; |
|
gpio-leds { |
compatible = "gpio-leds"; |
|
lan { |
label = "c20-v4:green:lan"; |
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; |
}; |
|
power { |
label = "c20-v4:green:power"; |
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; |
}; |
|
wan { |
label = "c20-v4:green:wan"; |
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; |
}; |
|
wan_orange { |
label = "c20-v4:orange:wan"; |
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
}; |
|
wlan5g { |
label = "c20-v4:green:wlan5g"; |
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; |
}; |
|
wlan2g { |
label = "c20-v4:green:wlan2g"; |
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; |
}; |
|
wps { |
label = "c20-v4:green:wps"; |
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; |
}; |
}; |
|
gpio-keys-polled { |
compatible = "gpio-keys-polled"; |
#address-cells = <1>; |
#size-cells = <0>; |
poll-interval = <20>; |
|
reset { |
label = "reset"; |
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RESTART>; |
}; |
|
rfkill { |
label = "rfkill"; |
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RFKILL>; |
}; |
}; |
}; |
|
&wmac { |
mtd-mac-address-increment = <(-2)>; |
}; |
|
ðernet { |
mediatek,portmap = "wllll"; |
}; |
|
&pinctrl { |
state_default: pinctrl0 { |
gpio { |
ralink,group = "i2s", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt"; |
ralink,function = "gpio"; |
}; |
}; |
}; |
|
&pcie { |
status = "okay"; |
|
pcie-bridge { |
mt76@0,0 { |
reg = <0x0000 0 0 0 0>; |
device_type = "pci"; |
mediatek,mtd-eeprom = <&factory 0x28000>; |
ieee80211-freq-limit = <5000000 6000000>; |
mtd-mac-address = <&factory 0xf100>; |
mtd-mac-address-increment = <(-1)>; |
}; |
}; |
}; |