/branches/18.06.1/target/linux/ramips/dts/ArcherC2-v1.dts |
@@ -0,0 +1,191 @@ |
/dts-v1/; |
|
#include "mt7620a.dtsi" |
|
#include <dt-bindings/gpio/gpio.h> |
#include <dt-bindings/input/input.h> |
|
/ { |
compatible = "tplink,c2-v1", "ralink,mt7620a-soc"; |
model = "TP-Link Archer C2 v1"; |
|
aliases { |
led-boot = &led_wps; |
led-failsafe = &led_wps; |
led-running = &led_wps; |
led-upgrade = &led_wps; |
}; |
|
chosen { |
bootargs = "console=ttyS0,115200"; |
}; |
|
pinctrl { |
state_default: pinctrl0 { |
gpio { |
ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk"; |
ralink,function = "gpio"; |
}; |
}; |
}; |
|
leds { |
compatible = "gpio-leds"; |
|
lan { |
label = "c2-v1:green:lan"; |
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; |
}; |
|
usb { |
label = "c2-v1:green:usb"; |
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
trigger-sources = <&ohci_port1>, <&ehci_port1>; |
linux,default-trigger = "usbport"; |
}; |
|
led_wps: wps { |
label = "c2-v1:green:wps"; |
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; |
}; |
|
wan { |
label = "c2-v1:green:wan"; |
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; |
}; |
|
wlan { |
label = "c2-v1:green:wlan"; |
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; |
}; |
}; |
|
keys { |
compatible = "gpio-keys"; |
|
reset_wps { |
label = "reset_wps"; |
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RESTART>; |
}; |
|
rfkill { |
label = "rfkill"; |
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RFKILL>; |
}; |
}; |
|
rtl8367rb { |
compatible = "realtek,rtl8367b", "rtl8367b"; |
cpu_port = <6>; |
realtek,extif1 = <1 0 1 1 1 1 1 1 2>; |
mii-bus = <&mdio0>; |
}; |
}; |
|
&spi0 { |
status = "okay"; |
|
m25p80@0 { |
compatible = "jedec,spi-nor"; |
reg = <0>; |
spi-max-frequency = <10000000>; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
#size-cells = <1>; |
|
partition@0 { |
label = "u-boot"; |
reg = <0x0 0x20000>; |
read-only; |
}; |
|
partition@20000 { |
compatible = "tplink,firmware"; |
label = "firmware"; |
reg = <0x20000 0x7a0000>; |
}; |
|
partition@7c0000 { |
label = "config"; |
reg = <0x7c0000 0x10000>; |
read-only; |
}; |
|
rom: partition@7d0000 { |
label = "rom"; |
reg = <0x7d0000 0x10000>; |
read-only; |
}; |
|
partition@7e0000 { |
label = "romfile"; |
reg = <0x7e0000 0x10000>; |
read-only; |
}; |
|
radio: partition@7f0000 { |
label = "radio"; |
reg = <0x7f0000 0x10000>; |
read-only; |
}; |
}; |
}; |
}; |
|
ðernet { |
status = "okay"; |
mtd-mac-address = <&rom 0xf100>; |
pinctrl-names = "default"; |
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; |
|
port@5 { |
status = "okay"; |
mediatek,fixed-link = <1000 1 1 1>; |
phy-mode = "rgmii"; |
}; |
|
mdio0: mdio-bus { |
status = "okay"; |
}; |
}; |
|
|
&gpio1 { |
status = "okay"; |
}; |
|
&gpio2 { |
status = "okay"; |
}; |
|
&gpio3 { |
status = "okay"; |
}; |
|
&wmac { |
ralink,mtd-eeprom = <&radio 0>; |
mtd-mac-address = <&rom 0xf100>; |
}; |
|
&ehci { |
status = "okay"; |
}; |
|
&ohci { |
status = "okay"; |
}; |
|
&pcie { |
status = "okay"; |
}; |
|
&pcie0 { |
mt76@0,0 { |
reg = <0x0000 0 0 0 0>; |
mediatek,mtd-eeprom = <&radio 0x8000>; |
}; |
}; |