| /branches/18.06.1/target/linux/ramips/dts/ArcherC2-v1.dts |
|---|
| @@ -0,0 +1,191 @@ |
|---|
| /dts-v1/; |
| |
| #include "mt7620a.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| compatible = "tplink,c2-v1", "ralink,mt7620a-soc"; |
| model = "TP-Link Archer C2 v1"; |
| |
| aliases { |
| led-boot = &led_wps; |
| led-failsafe = &led_wps; |
| led-running = &led_wps; |
| led-upgrade = &led_wps; |
| }; |
| |
| chosen { |
| bootargs = "console=ttyS0,115200"; |
| }; |
| |
| pinctrl { |
| state_default: pinctrl0 { |
| gpio { |
| ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk"; |
| ralink,function = "gpio"; |
| }; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| lan { |
| label = "c2-v1:green:lan"; |
| gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; |
| }; |
| |
| usb { |
| label = "c2-v1:green:usb"; |
| gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
| trigger-sources = <&ohci_port1>, <&ehci_port1>; |
| linux,default-trigger = "usbport"; |
| }; |
| |
| led_wps: wps { |
| label = "c2-v1:green:wps"; |
| gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; |
| }; |
| |
| wan { |
| label = "c2-v1:green:wan"; |
| gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; |
| }; |
| |
| wlan { |
| label = "c2-v1:green:wlan"; |
| gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| keys { |
| compatible = "gpio-keys"; |
| |
| reset_wps { |
| label = "reset_wps"; |
| gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_RESTART>; |
| }; |
| |
| rfkill { |
| label = "rfkill"; |
| gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_RFKILL>; |
| }; |
| }; |
| |
| rtl8367rb { |
| compatible = "realtek,rtl8367b", "rtl8367b"; |
| cpu_port = <6>; |
| realtek,extif1 = <1 0 1 1 1 1 1 1 2>; |
| mii-bus = <&mdio0>; |
| }; |
| }; |
| |
| &spi0 { |
| status = "okay"; |
| |
| m25p80@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x20000>; |
| read-only; |
| }; |
| |
| partition@20000 { |
| compatible = "tplink,firmware"; |
| label = "firmware"; |
| reg = <0x20000 0x7a0000>; |
| }; |
| |
| partition@7c0000 { |
| label = "config"; |
| reg = <0x7c0000 0x10000>; |
| read-only; |
| }; |
| |
| rom: partition@7d0000 { |
| label = "rom"; |
| reg = <0x7d0000 0x10000>; |
| read-only; |
| }; |
| |
| partition@7e0000 { |
| label = "romfile"; |
| reg = <0x7e0000 0x10000>; |
| read-only; |
| }; |
| |
| radio: partition@7f0000 { |
| label = "radio"; |
| reg = <0x7f0000 0x10000>; |
| read-only; |
| }; |
| }; |
| }; |
| }; |
| |
| ðernet { |
| status = "okay"; |
| mtd-mac-address = <&rom 0xf100>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; |
| |
| port@5 { |
| status = "okay"; |
| mediatek,fixed-link = <1000 1 1 1>; |
| phy-mode = "rgmii"; |
| }; |
| |
| mdio0: mdio-bus { |
| status = "okay"; |
| }; |
| }; |
| |
| |
| &gpio1 { |
| status = "okay"; |
| }; |
| |
| &gpio2 { |
| status = "okay"; |
| }; |
| |
| &gpio3 { |
| status = "okay"; |
| }; |
| |
| &wmac { |
| ralink,mtd-eeprom = <&radio 0>; |
| mtd-mac-address = <&rom 0xf100>; |
| }; |
| |
| &ehci { |
| status = "okay"; |
| }; |
| |
| &ohci { |
| status = "okay"; |
| }; |
| |
| &pcie { |
| status = "okay"; |
| }; |
| |
| &pcie0 { |
| mt76@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| mediatek,mtd-eeprom = <&radio 0x8000>; |
| }; |
| }; |
