OpenWrt
| /branches/18.06.1/target/linux/ramips/dts/3G150B.dts |
|---|
| @@ -9,17 +9,10 @@ |
| compatible = "tenda,3g150b", "ralink,rt5350-soc"; |
| model = "Tenda 3G150B"; |
| aliases { |
| led-boot = &led_ap; |
| led-failsafe = &led_ap; |
| led-running = &led_ap; |
| led-upgrade = &led_ap; |
| }; |
| leds { |
| gpio-leds { |
| compatible = "gpio-leds"; |
| led_ap: ap { |
| ap { |
| label = "3g150b:blue:ap"; |
| gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; |
| }; |
| @@ -27,13 +20,13 @@ |
| 3g { |
| label = "3g150b:blue:3g"; |
| gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; |
| trigger-sources = <&ohci_port1>, <&ehci_port1>; |
| linux,default-trigger = "usbport"; |
| }; |
| }; |
| keys { |
| gpio-keys-polled { |
| compatible = "gpio-keys-polled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| poll-interval = <20>; |
| reset { |
| @@ -59,38 +52,33 @@ |
| status = "okay"; |
| m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x30000>; |
| read-only; |
| }; |
| partition@30000 { |
| label = "u-boot-env"; |
| reg = <0x30000 0x10000>; |
| read-only; |
| }; |
| partition@30000 { |
| label = "u-boot-env"; |
| reg = <0x30000 0x10000>; |
| read-only; |
| }; |
| factory: partition@40000 { |
| label = "factory"; |
| reg = <0x40000 0x10000>; |
| read-only; |
| }; |
| factory: partition@40000 { |
| label = "factory"; |
| reg = <0x40000 0x10000>; |
| read-only; |
| }; |
| partition@50000 { |
| compatible = "denx,uimage"; |
| label = "firmware"; |
| reg = <0x50000 0x3b0000>; |
| }; |
| partition@50000 { |
| label = "firmware"; |
| reg = <0x50000 0x3b0000>; |
| }; |
| }; |
| }; |
| @@ -102,7 +90,7 @@ |
| &pinctrl { |
| state_default: pinctrl0 { |
| gpio { |
| ralink,group = "i2c", "jtag", "uartf", "led"; |
| ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led"; |
| ralink,function = "gpio"; |
| }; |
| }; |