/branches/18.06.1/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUFX.dtsi |
@@ -0,0 +1,298 @@ |
#include "vr9.dtsi" |
|
#include <dt-bindings/input/input.h> |
#include <dt-bindings/mips/lantiq_rcu_gphy.h> |
|
/ { |
compatible = "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9"; |
|
chosen { |
bootargs = "console=ttyLTQ0,115200"; |
}; |
|
aliases { |
led-boot = &power_green; |
led-failsafe = &power_red; |
led-running = &power_green; |
led-upgrade = &power_green; |
|
led-dsl = &dsl_green; |
led-internet = &internet_green; |
led-wifi = &wireless_green; |
}; |
|
memory@0 { |
reg = <0x0 0x8000000>; |
}; |
|
gpio-keys-polled { |
compatible = "gpio-keys-polled"; |
#address-cells = <1>; |
#size-cells = <0>; |
poll-interval = <100>; |
|
reset { |
label = "reset"; |
gpios = <&gpio 39 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RESTART>; |
}; |
|
rfkill { |
label = "rfkill"; |
gpios = <&gpio 1 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RFKILL>; |
}; |
}; |
|
gpio-leds { |
compatible = "gpio-leds"; |
|
internet_red { |
label = "p2812hnufx:red:internet"; |
gpios = <&stp 16 GPIO_ACTIVE_LOW>; |
}; |
internet_green: internet_green { |
label = "p2812hnufx:green:internet"; |
gpios = <&stp 17 GPIO_ACTIVE_LOW>; |
}; |
dsl_green: dsl_green { |
label = "p2812hnufx:green:dsl"; |
gpios = <&stp 18 GPIO_ACTIVE_LOW>; |
}; |
dsl_orange { |
label = "p2812hnufx:orange:dsl"; |
gpios = <&stp 19 GPIO_ACTIVE_LOW>; |
}; |
wireless_orange { |
label = "p2812hnufx:orange:wlan"; |
gpios = <&stp 20 GPIO_ACTIVE_LOW>; |
}; |
wireless_green: wireless_green { |
label = "p2812hnufx:green:wlan"; |
gpios = <&stp 21 GPIO_ACTIVE_LOW>; |
}; |
power_red: power { |
label = "p2812hnufx:red:power"; |
gpios = <&stp 22 GPIO_ACTIVE_LOW>; |
}; |
power_green: power2 { |
label = "p2812hnufx:green:power"; |
gpios = <&stp 23 GPIO_ACTIVE_LOW>; |
default-state = "keep"; |
}; |
phone1 { |
label = "p2812hnufx:green:phone"; |
gpios = <&gpio 11 GPIO_ACTIVE_LOW>; |
}; |
phone1warn { |
label = "p2812hnufx:orange:phone"; |
gpios = <&gpio 12 GPIO_ACTIVE_LOW>; |
}; |
phone2warn { |
label = "p2812hnufx:orange:phone2"; |
gpios = <&gpio 26 GPIO_ACTIVE_LOW>; |
}; |
phone2 { |
label = "p2812hnufx:green:phone2"; |
gpios = <&gpio 28 GPIO_ACTIVE_LOW>; |
}; |
}; |
|
usb_vbus: regulator-usb-vbus { |
compatible = "regulator-fixed"; |
|
regulator-name = "USB_VBUS"; |
|
regulator-min-microvolt = <5000000>; |
regulator-max-microvolt = <5000000>; |
|
gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; |
enable-active-high; |
}; |
}; |
|
ð0 { |
lan: interface@0 { |
compatible = "lantiq,xrx200-pdi"; |
#address-cells = <1>; |
#size-cells = <0>; |
reg = <0>; |
mac-address = [ 00 11 22 33 44 55 ]; |
lantiq,switch; |
|
ethernet@0 { |
compatible = "lantiq,xrx200-pdi-port"; |
reg = <0>; |
phy-mode = "rgmii"; |
phy-handle = <&phy0>; |
}; |
ethernet@1 { |
compatible = "lantiq,xrx200-pdi-port"; |
reg = <1>; |
phy-mode = "rgmii"; |
phy-handle = <&phy1>; |
}; |
ethernet@2 { |
compatible = "lantiq,xrx200-pdi-port"; |
reg = <2>; |
phy-mode = "gmii"; |
phy-handle = <&phy11>; |
}; |
ethernet@4 { |
compatible = "lantiq,xrx200-pdi-port"; |
reg = <4>; |
phy-mode = "gmii"; |
phy-handle = <&phy13>; |
}; |
ethernet@5 { |
compatible = "lantiq,xrx200-pdi-port"; |
reg = <5>; |
phy-mode = "rgmii"; |
phy-handle = <&phy5>; |
}; |
}; |
|
mdio@0 { |
#address-cells = <1>; |
#size-cells = <0>; |
compatible = "lantiq,xrx200-mdio"; |
reg = <0>; |
|
phy0: ethernet-phy@0 { |
reg = <0x0>; |
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; |
}; |
phy1: ethernet-phy@1 { |
reg = <0x1>; |
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; |
}; |
phy5: ethernet-phy@5 { |
reg = <0x5>; |
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; |
}; |
phy11: ethernet-phy@11 { |
reg = <0x11>; |
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; |
}; |
phy13: ethernet-phy@13 { |
reg = <0x13>; |
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; |
}; |
}; |
}; |
|
&gphy0 { |
lantiq,gphy-mode = <GPHY_MODE_GE>; |
}; |
|
&gphy1 { |
lantiq,gphy-mode = <GPHY_MODE_GE>; |
}; |
|
&gpio { |
pinctrl-names = "default"; |
pinctrl-0 = <&state_default>; |
|
state_default: pinmux { |
exin3 { |
lantiq,groups = "exin3"; |
lantiq,function = "exin"; |
}; |
mdio { |
lantiq,groups = "mdio"; |
lantiq,function = "mdio"; |
}; |
gphy-leds { |
lantiq,groups = "gphy0 led1", "gphy1 led1", |
"gphy0 led2", "gphy1 led2"; |
lantiq,function = "gphy"; |
lantiq,pull = <2>; |
lantiq,open-drain = <0>; |
lantiq,output = <1>; |
}; |
stp { |
lantiq,groups = "stp"; |
lantiq,function = "stp"; |
lantiq,pull = <2>; |
lantiq,open-drain = <0>; |
lantiq,output = <1>; |
}; |
pci-in { |
lantiq,groups = "req1"; |
lantiq,function = "pci"; |
lantiq,output = <0>; |
lantiq,open-drain = <1>; |
lantiq,pull = <2>; |
}; |
pci-out { |
lantiq,groups = "gnt1"; |
lantiq,function = "pci"; |
lantiq,output = <1>; |
lantiq,open-drain = <0>; |
lantiq,pull = <0>; |
}; |
pci_rst { |
lantiq,pins = "io21"; |
lantiq,output = <1>; |
lantiq,open-drain = <0>; |
lantiq,pull = <2>; |
}; |
pcie-rst { |
lantiq,pins = "io38"; |
lantiq,pull = <0>; |
lantiq,output = <1>; |
}; |
ifxhcd-rst { |
lantiq,pins = "io33"; |
lantiq,pull = <0>; |
lantiq,open-drain = <0>; |
lantiq,output = <1>; |
}; |
nand_out { |
lantiq,groups = "nand cle", "nand ale"; |
lantiq,function = "ebu"; |
lantiq,output = <1>; |
lantiq,open-drain = <0>; |
lantiq,pull = <0>; |
}; |
nand_cs1 { |
lantiq,groups = "nand cs1"; |
lantiq,function = "ebu"; |
lantiq,open-drain = <0>; |
lantiq,pull = <0>; |
}; |
}; |
}; |
|
&pci0 { |
status = "okay"; |
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; |
}; |
|
&stp { |
status = "okay"; |
|
lantiq,shadow = <0xffffff>; |
lantiq,groups = <0x7>; |
lantiq,dsl = <0x0>; |
lantiq,phy1 = <0x0>; |
lantiq,phy2 = <0x0>; |
}; |
|
&usb_phy0 { |
status = "okay"; |
}; |
|
&usb_phy1 { |
status = "okay"; |
}; |
|
&usb0 { |
status = "okay"; |
vbus-supply = <&usb_vbus>; |
}; |
|
&usb1 { |
status = "okay"; |
vbus-supply = <&usb_vbus>; |
}; |