OpenWrt
| /branches/18.06.1/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ACMP252.dts |
|---|
| @@ -0,0 +1,114 @@ |
| /dts-v1/; |
| #include "danube.dtsi" |
| / { |
| compatible = "audiocodes,mp-252", "lantiq,xway", "lantiq,danube"; |
| model = "AudioCodes MediaPack MP-252"; |
| chosen { |
| bootargs = "console=ttyLTQ0,115200"; |
| }; |
| memory@0 { |
| reg = <0x0 0x4000000>; |
| }; |
| usb_vbus: regulator-usb-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "USB_VBUS"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio 3 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| }; |
| &gpio { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&state_default>; |
| state_default: pinmux { |
| exin { |
| lantiq,groups = "exin1"; |
| lantiq,function = "exin"; |
| }; |
| pci { |
| lantiq,groups = "gnt1", "req1"; |
| lantiq,function = "pci"; |
| }; |
| }; |
| }; |
| &gsw { |
| phy-mode = "rmii"; |
| }; |
| &localbus { |
| nor@0 { |
| compatible = "lantiq,nor"; |
| bank-width = <2>; |
| reg = <0 0x0 0x2000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partition@0 { |
| label = "uboot"; |
| reg = <0x0 0x20000>; |
| read-only; |
| }; |
| partition@20000 { |
| label = "uboot_env"; |
| reg = <0x20000 0x20000>; |
| }; |
| partition@40000 { |
| label = "boardconfig"; |
| reg = <0x40000 0x60000>; |
| read-only; |
| }; |
| partition@a0000 { |
| label = "firmware"; |
| reg = <0xa0000 0xf20000>; |
| }; |
| partition@fc0000 { |
| label = "sysconfig"; |
| reg = <0xfc0000 0x40000>; |
| }; |
| partition@0x1000000 { |
| label = "rootfs_data"; |
| reg = <0x1000000 0x1000000>; |
| }; |
| }; |
| }; |
| }; |
| &pci0 { |
| status = "okay"; |
| }; |
| &usb_phy { |
| status = "okay"; |
| }; |
| &usb { |
| status = "okay"; |
| vbus-supply = <&usb_vbus>; |
| }; |
| &vmmc { |
| status = "okay"; |
| gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; |
| }; |