/branches/18.06.1/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi |
@@ -0,0 +1,307 @@ |
/* Copyright (c) 2015, The Linux Foundation. All rights reserved. |
* Copyright (c) 2018, David Bauer <mail@david-bauer.net> |
* |
* Permission to use, copy, modify, and/or distribute this software for any |
* purpose with or without fee is hereby granted, provided that the above |
* copyright notice and this permission notice appear in all copies. |
* |
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
* |
*/ |
|
#include "qcom-ipq4019.dtsi" |
#include <dt-bindings/gpio/gpio.h> |
#include <dt-bindings/input/input.h> |
#include <dt-bindings/soc/qcom,tcsr.h> |
|
/ { |
model = "Netgear EX61X0v2"; |
compatible = "netgear,ex61x0v2", "qcom,ipq4019"; |
|
soc { |
mdio@90000 { |
status = "okay"; |
}; |
|
ess-psgmii@98000 { |
status = "okay"; |
}; |
|
tcsr@1949000 { |
compatible = "qcom,tcsr"; |
reg = <0x1949000 0x100>; |
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; |
}; |
|
ess_tcsr@1953000 { |
compatible = "qcom,tcsr"; |
reg = <0x1953000 0x1000>; |
qcom,ess-interface-select = <TCSR_ESS_PSGMII>; |
}; |
|
tcsr@1957000 { |
compatible = "qcom,tcsr"; |
reg = <0x1957000 0x100>; |
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; |
}; |
|
crypto@8e3a000 { |
status = "okay"; |
}; |
|
watchdog@b017000 { |
status = "okay"; |
}; |
|
ess-switch@c000000 { |
status = "okay"; |
}; |
|
edma@c080000 { |
status = "okay"; |
qcom,num_gmac = <1>; |
}; |
}; |
|
aliases { |
led-boot = &power_amber; |
led-failsafe = &power_amber; |
led-running = &power_green; |
led-upgrade = &power_amber; |
}; |
|
keys { |
compatible = "gpio-keys"; |
|
wps { |
label = "wps"; |
gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_WPS_BUTTON>; |
}; |
|
reset { |
label = "reset"; |
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; |
linux,code = <KEY_RESTART>; |
}; |
}; |
|
led_spi { |
compatible = "spi-gpio"; |
#address-cells = <1>; |
#size-cells = <0>; |
|
gpio-sck = <&tlmm 5 GPIO_ACTIVE_HIGH>; |
gpio-mosi = <&tlmm 4 GPIO_ACTIVE_HIGH>; |
num-chipselects = <0>; |
|
led_gpio: led_gpio@0 { |
compatible = "fairchild,74hc595"; |
reg = <0>; |
gpio-controller; |
#gpio-cells = <2>; |
registers-number = <1>; |
spi-max-frequency = <1000000>; |
}; |
}; |
|
leds { |
compatible = "gpio-leds"; |
|
power_amber: power_amber { |
label = "ex61x0v2:amber:power"; |
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; |
}; |
|
power_green: power_green { |
label = "ex61x0v2:green:power"; |
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; |
}; |
|
right { |
label = "ex61x0v2:blue:right"; |
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; |
}; |
|
left { |
label = "ex61x0v2:blue:left"; |
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; |
}; |
|
client_green { |
label = "ex61x0v2:green:client"; |
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; |
}; |
|
client_red { |
label = "ex61x0v2:red:client"; |
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; |
}; |
|
router_green { |
label = "ex61x0v2:green:router"; |
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; |
}; |
|
router_red { |
label = "ex61x0v2:red:router"; |
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; |
}; |
|
wps { |
label = "ex61x0v2:green:wps"; |
gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; |
}; |
}; |
}; |
|
&tlmm { |
serial_pins: serial_pinmux { |
mux { |
pins = "gpio60", "gpio61"; |
function = "blsp_uart0"; |
bias-disable; |
}; |
}; |
|
spi_0_pins: spi_0_pinmux { |
pin { |
function = "blsp_spi0"; |
pins = "gpio55", "gpio56", "gpio57"; |
drive-strength = <12>; |
bias-disable; |
}; |
pin_cs { |
function = "gpio"; |
pins = "gpio54"; |
drive-strength = <2>; |
bias-disable; |
output-high; |
}; |
}; |
}; |
|
&blsp1_spi1 { |
pinctrl-0 = <&spi_0_pins>; |
pinctrl-names = "default"; |
status = "okay"; |
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; |
|
mx25l12805d@0 { |
compatible = "jedec,spi-nor"; |
reg = <0>; |
spi-max-frequency = <24000000>; |
|
partitions { |
compatible = "fixed-partitions"; |
#address-cells = <1>; |
#size-cells = <1>; |
|
partition0@0 { |
label = "SBL1"; |
reg = <0x00000000 0x00040000>; |
read-only; |
}; |
|
partition1@40000 { |
label = "MIBIB"; |
reg = <0x00040000 0x00020000>; |
read-only; |
}; |
|
partition2@60000 { |
label = "QSEE"; |
reg = <0x00060000 0x00060000>; |
read-only; |
}; |
|
partition3@c0000 { |
label = "CDT"; |
reg = <0x000c0000 0x00010000>; |
read-only; |
}; |
|
partition4@d0000 { |
label = "DDRPARAMS"; |
reg = <0x000d0000 0x00010000>; |
read-only; |
}; |
|
partition5@E0000 { |
label = "APPSBLENV"; |
reg = <0x000e0000 0x00010000>; |
read-only; |
}; |
|
partition6@F0000 { |
label = "APPSBL"; |
reg = <0x000f0000 0x00080000>; |
read-only; |
}; |
|
partition7@170000 { |
label = "ART"; |
reg = <0x00170000 0x00010000>; |
read-only; |
}; |
|
partition8@180000 { |
label = "config"; |
reg = <0x00180000 0x00010000>; |
read-only; |
}; |
|
partition9@190000 { |
label = "pot"; |
reg = <0x00190000 0x00010000>; |
read-only; |
}; |
|
partition10@1a0000 { |
label = "dnidata"; |
reg = <0x001a0000 0x00010000>; |
read-only; |
}; |
|
partition11@1b0000 { |
compatible = "denx,fit"; |
label = "firmware"; |
reg = <0x001b0000 0x00e10000>; |
}; |
|
partition12@fc0000 { |
label = "language"; |
reg = <0x00fc0000 0x00040000>; |
read-only; |
}; |
}; |
}; |
}; |
|
&blsp1_uart1 { |
pinctrl-0 = <&serial_pins>; |
pinctrl-names = "default"; |
status = "okay"; |
}; |
|
&blsp_dma { |
status = "okay"; |
}; |
|
&cryptobam { |
status = "okay"; |
}; |
|
&wifi0 { |
status = "okay"; |
}; |
|
&wifi1 { |
status = "okay"; |
}; |