/branches/18.06.1/target/linux/ar71xx/files/arch/mips/ath79/mach-sc1750.c |
@@ -0,0 +1,145 @@ |
/* |
* Abicom International Scorpion SC1750 support. |
* |
* Copyright (c) 2012 Qualcomm Atheros |
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> |
* Copyright (c) 2017 Conor O'Gorman <i@conorogorman.net> |
* |
* Permission to use, copy, modify, and/or distribute this software for any |
* purpose with or without fee is hereby granted, provided that the above |
* copyright notice and this permission notice appear in all copies. |
* |
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
* |
*/ |
|
#include <linux/platform_device.h> |
#include <linux/platform_data/phy-at803x.h> |
|
#include <asm/mach-ath79/ar71xx_regs.h> |
|
#include "common.h" |
#include "pci.h" |
#include "dev-ap9x-pci.h" |
#include "dev-gpio-buttons.h" |
#include "dev-eth.h" |
#include "dev-leds-gpio.h" |
#include "dev-m25p80.h" |
#include "dev-nfc.h" |
#include "dev-usb.h" |
#include "dev-wmac.h" |
#include "machtypes.h" |
|
#define SC1750_GPIO_LED_POWER 11 |
#define SC1750_GPIO_LED_ERR1 12 |
#define SC1750_GPIO_LED_WLAN 13 |
#define SC1750_GPIO_LED_ERR2 14 |
#define SC1750_GPIO_LED_OK3 15 |
#define SC1750_GPIO_LED_ERR3 16 |
#define SC1750_GPIO_BTN_RESET 4 |
|
#define SC1750_KEYS_POLL_INTERVAL 20 /* msecs */ |
#define SC1750_KEYS_DEBOUNCE_INTERVAL (3 * SC1750_KEYS_POLL_INTERVAL) |
|
#define SC1750_MAC0_OFFSET 0 |
#define SC1750_MAC1_OFFSET 6 |
#define SC1750_WMAC_CALDATA_OFFSET 0x1000 |
#define SC1750_PCIE_CALDATA_OFFSET 0x5000 |
|
static struct gpio_led sc1750_leds_gpio[] __initdata = { |
{ |
.name = "sc1750:green:power", |
.gpio = SC1750_GPIO_LED_POWER, |
.active_low = 1, |
}, |
{ |
.name = "sc1750:red:power", |
.gpio = SC1750_GPIO_LED_ERR1, |
.active_low = 1, |
}, |
{ |
.name = "sc1750:green:wlan", |
.gpio = SC1750_GPIO_LED_WLAN, |
.active_low = 1, |
}, |
{ |
.name = "sc1750:red:wlan", |
.gpio = SC1750_GPIO_LED_ERR2, |
.active_low = 1, |
} |
}; |
|
static struct gpio_keys_button sc1750_gpio_keys[] __initdata = { |
{ |
.desc = "reset", |
.type = EV_KEY, |
.code = KEY_RESTART, |
.debounce_interval = SC1750_KEYS_DEBOUNCE_INTERVAL, |
.gpio = SC1750_GPIO_BTN_RESET, |
.active_low = 0, |
} |
}; |
|
static struct at803x_platform_data at803x_data = { |
.disable_smarteee = 1, |
.enable_rgmii_rx_delay = 0, |
.enable_rgmii_tx_delay = 0, |
}; |
|
static struct mdio_board_info sc1750_mdio0_info[] = { |
{ |
.bus_id = "ag71xx-mdio.0", |
.mdio_addr = 1, |
.platform_data = &at803x_data, |
}, |
}; |
|
static void __init sc1750_setup(void) |
{ |
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); |
|
ath79_register_m25p80(NULL); |
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(sc1750_leds_gpio), |
sc1750_leds_gpio); |
ath79_register_gpio_keys_polled(-1, SC1750_KEYS_POLL_INTERVAL, |
ARRAY_SIZE(sc1750_gpio_keys), |
sc1750_gpio_keys); |
|
ath79_register_usb(); |
ath79_register_nfc(); |
|
ath79_register_wmac(art + SC1750_WMAC_CALDATA_OFFSET, NULL); |
|
ath79_register_mdio(0, 0); |
mdiobus_register_board_info(sc1750_mdio0_info, |
ARRAY_SIZE(sc1750_mdio0_info)); |
|
ath79_init_mac(ath79_eth0_data.mac_addr, art + SC1750_MAC0_OFFSET, 0); |
|
ath79_eth0_pll_data.pll_1000 = 0xa6000101; |
ath79_eth0_pll_data.pll_100 = 0xa4000101; |
/* GMAC0 is connected to the RMGII interface */ |
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; |
ath79_eth0_data.phy_mask = 0xF; |
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; |
|
ath79_register_eth(0); |
|
/* GMAC1 is connected to the SGMII interface */ |
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; |
ath79_eth1_data.speed = SPEED_1000; |
ath79_eth1_data.duplex = DUPLEX_FULL; |
|
ath79_register_eth(1); |
|
ath79_register_pci(); |
} |
|
MIPS_MACHINE(ATH79_MACH_SC1750, "SC1750", "Abicom SC1750", sc1750_setup); |