/branches/18.06.1/package/utils/busybox/config/networking/Config.in |
@@ -1,7 +1,7 @@ |
# DO NOT EDIT. This file is generated from Config.src |
# |
# For a description of the syntax of this configuration file, |
# see docs/Kconfig-language.txt. |
# see scripts/kbuild/config-language.txt. |
# |
|
menu "Networking Utilities" |
@@ -10,19 +10,19 @@ |
bool "Enable IPv6 support" |
default BUSYBOX_DEFAULT_FEATURE_IPV6 |
help |
Enable IPv6 support in busybox. |
This adds IPv6 support in the networking applets. |
Enable IPv6 support in busybox. |
This adds IPv6 support in the networking applets. |
|
config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL |
bool "Enable Unix domain socket support (usually not needed)" |
default BUSYBOX_DEFAULT_FEATURE_UNIX_LOCAL |
help |
Enable Unix domain socket support in all busybox networking |
applets. Address of the form local:/path/to/unix/socket |
will be recognized. |
Enable Unix domain socket support in all busybox networking |
applets. Address of the form local:/path/to/unix/socket |
will be recognized. |
|
This extension is almost never used in real world usage. |
You most likely want to say N. |
This extension is almost never used in real world usage. |
You most likely want to say N. |
|
config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS |
bool "Prefer IPv4 addresses from DNS queries" |
@@ -29,54 +29,44 @@ |
default BUSYBOX_DEFAULT_FEATURE_PREFER_IPV4_ADDRESS |
depends on BUSYBOX_CONFIG_FEATURE_IPV6 |
help |
Use IPv4 address of network host if it has one. |
Use IPv4 address of network host if it has one. |
|
If this option is off, the first returned address will be used. |
This may cause problems when your DNS server is IPv6-capable and |
is returning IPv6 host addresses too. If IPv6 address |
precedes IPv4 one in DNS reply, busybox network applets |
(e.g. wget) will use IPv6 address. On an IPv6-incapable host |
or network applets will fail to connect to the host |
using IPv6 address. |
If this option is off, the first returned address will be used. |
This may cause problems when your DNS server is IPv6-capable and |
is returning IPv6 host addresses too. If IPv6 address |
precedes IPv4 one in DNS reply, busybox network applets |
(e.g. wget) will use IPv6 address. On an IPv6-incapable host |
or network applets will fail to connect to the host |
using IPv6 address. |
|
config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS |
bool "Verbose resolution errors" |
default BUSYBOX_DEFAULT_VERBOSE_RESOLUTION_ERRORS |
help |
Enable if you are not satisfied with simplistic |
"can't resolve 'hostname.com'" and want to know more. |
This may increase size of your executable a bit. |
Enable if you are not satisfied with simplistic |
"can't resolve 'hostname.com'" and want to know more. |
This may increase size of your executable a bit. |
|
config BUSYBOX_CONFIG_FEATURE_TLS_SHA1 |
bool "In TLS code, support ciphers which use deprecated SHA1" |
depends on BUSYBOX_CONFIG_TLS |
default BUSYBOX_DEFAULT_FEATURE_TLS_SHA1 |
help |
Selecting this option increases interoperability with very old |
servers, but slightly increases code size. |
|
Most TLS servers support SHA256 today (2018), since SHA1 is |
considered possibly insecure (although not yet definitely broken). |
|
config BUSYBOX_CONFIG_ARP |
bool "arp (10 kb)" |
bool "arp" |
default BUSYBOX_DEFAULT_ARP |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
Manipulate the system ARP cache. |
Manipulate the system ARP cache. |
config BUSYBOX_CONFIG_ARPING |
bool "arping (9 kb)" |
bool "arping" |
default BUSYBOX_DEFAULT_ARPING |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
Ping hosts by ARP packets. |
Ping hosts by ARP packets. |
|
config BUSYBOX_CONFIG_BRCTL |
bool "brctl (4.7 kb)" |
bool "brctl" |
default BUSYBOX_DEFAULT_BRCTL |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
Manage ethernet bridges. |
Supports addbr/delbr and addif/delif. |
Manage ethernet bridges. |
Supports addbr/delbr and addif/delif. |
|
config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY |
bool "Fancy options" |
@@ -83,11 +73,11 @@ |
default BUSYBOX_DEFAULT_FEATURE_BRCTL_FANCY |
depends on BUSYBOX_CONFIG_BRCTL |
help |
Add support for extended option like: |
setageing, setfd, sethello, setmaxage, |
setpathcost, setportprio, setbridgeprio, |
stp |
This adds about 600 bytes. |
Add support for extended option like: |
setageing, setfd, sethello, setmaxage, |
setpathcost, setportprio, setbridgeprio, |
stp |
This adds about 600 bytes. |
|
config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW |
bool "Support show" |
@@ -94,32 +84,31 @@ |
default BUSYBOX_DEFAULT_FEATURE_BRCTL_SHOW |
depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY |
help |
Add support for option which prints the current config: |
show |
Add support for option which prints the current config: |
show |
config BUSYBOX_CONFIG_DNSD |
bool "dnsd (9.8 kb)" |
bool "dnsd" |
default BUSYBOX_DEFAULT_DNSD |
help |
Small and static DNS server daemon. |
Small and static DNS server daemon. |
config BUSYBOX_CONFIG_ETHER_WAKE |
bool "ether-wake (4.9 kb)" |
bool "ether-wake" |
default BUSYBOX_DEFAULT_ETHER_WAKE |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
Send a magic packet to wake up sleeping machines. |
Send a magic packet to wake up sleeping machines. |
config BUSYBOX_CONFIG_FTPD |
bool "ftpd (30 kb)" |
bool "ftpd" |
default BUSYBOX_DEFAULT_FTPD |
help |
Simple FTP daemon. You have to run it via inetd. |
Simple FTP daemon. You have to run it via inetd. |
|
config BUSYBOX_CONFIG_FEATURE_FTPD_WRITE |
bool "Enable -w (upload commands)" |
bool "Enable upload commands" |
default BUSYBOX_DEFAULT_FEATURE_FTPD_WRITE |
depends on BUSYBOX_CONFIG_FTPD |
help |
Enable -w option. "ftpd -w" will accept upload commands |
such as STOR, STOU, APPE, DELE, MKD, RMD, rename commands. |
Enable all kinds of FTP upload commands (-w option) |
|
config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST |
bool "Enable workaround for RFC-violating clients" |
@@ -126,11 +115,11 @@ |
default BUSYBOX_DEFAULT_FEATURE_FTPD_ACCEPT_BROKEN_LIST |
depends on BUSYBOX_CONFIG_FTPD |
help |
Some ftp clients (among them KDE's Konqueror) issue illegal |
"LIST -l" requests. This option works around such problems. |
It might prevent you from listing files starting with "-" and |
it increases the code size by ~40 bytes. |
Most other ftp servers seem to behave similar to this. |
Some ftp clients (among them KDE's Konqueror) issue illegal |
"LIST -l" requests. This option works around such problems. |
It might prevent you from listing files starting with "-" and |
it increases the code size by ~40 bytes. |
Most other ftp servers seem to behave similar to this. |
|
config BUSYBOX_CONFIG_FEATURE_FTPD_AUTHENTICATION |
bool "Enable authentication" |
@@ -137,24 +126,18 @@ |
default BUSYBOX_DEFAULT_FEATURE_FTPD_AUTHENTICATION |
depends on BUSYBOX_CONFIG_FTPD |
help |
Require login, and change to logged in user's UID:GID before |
accessing any files. Option "-a USER" allows "anonymous" |
logins (treats them as if USER logged in). |
|
If this option is not selected, ftpd runs with the rights |
of the user it was started under, and does not require login. |
Take care to not launch it under root. |
Enable basic system login as seen in telnet etc. |
config BUSYBOX_CONFIG_FTPGET |
bool "ftpget (7.8 kb)" |
bool "ftpget" |
default BUSYBOX_DEFAULT_FTPGET |
help |
Retrieve a remote file via FTP. |
Retrieve a remote file via FTP. |
|
config BUSYBOX_CONFIG_FTPPUT |
bool "ftpput (7.5 kb)" |
bool "ftpput" |
default BUSYBOX_DEFAULT_FTPPUT |
help |
Store a remote file via FTP. |
Store a remote file via FTP. |
|
config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS |
bool "Enable long options in ftpget/ftpput" |
@@ -161,21 +144,21 @@ |
default BUSYBOX_DEFAULT_FEATURE_FTPGETPUT_LONG_OPTIONS |
depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT) |
config BUSYBOX_CONFIG_HOSTNAME |
bool "hostname (5.5 kb)" |
bool "hostname" |
default BUSYBOX_DEFAULT_HOSTNAME |
help |
Show or set the system's host name. |
Show or set the system's host name. |
|
config BUSYBOX_CONFIG_DNSDOMAINNAME |
bool "dnsdomainname (3.6 kb)" |
bool "dnsdomainname" |
default BUSYBOX_DEFAULT_DNSDOMAINNAME |
help |
Alias to "hostname -d". |
Alias to "hostname -d". |
config BUSYBOX_CONFIG_HTTPD |
bool "httpd (32 kb)" |
bool "httpd" |
default BUSYBOX_DEFAULT_HTTPD |
help |
HTTP server. |
HTTP server. |
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES |
bool "Support 'Ranges:' header" |
@@ -182,9 +165,9 @@ |
default BUSYBOX_DEFAULT_FEATURE_HTTPD_RANGES |
depends on BUSYBOX_CONFIG_HTTPD |
help |
Makes httpd emit "Accept-Ranges: bytes" header and understand |
"Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted |
downloads, seeking in multimedia players etc. |
Makes httpd emit "Accept-Ranges: bytes" header and understand |
"Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted |
downloads, seeking in multimedia players etc. |
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID |
bool "Enable -u <user> option" |
@@ -191,34 +174,34 @@ |
default BUSYBOX_DEFAULT_FEATURE_HTTPD_SETUID |
depends on BUSYBOX_CONFIG_HTTPD |
help |
This option allows the server to run as a specific user |
rather than defaulting to the user that starts the server. |
Use of this option requires special privileges to change to a |
different user. |
This option allows the server to run as a specific user |
rather than defaulting to the user that starts the server. |
Use of this option requires special privileges to change to a |
different user. |
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH |
bool "Enable HTTP authentication" |
bool "Enable Basic http Authentication" |
default BUSYBOX_DEFAULT_FEATURE_HTTPD_BASIC_AUTH |
depends on BUSYBOX_CONFIG_HTTPD |
help |
Utilizes password settings from /etc/httpd.conf for basic |
authentication on a per url basis. |
Example for httpd.conf file: |
/adm:toor:PaSsWd |
Utilizes password settings from /etc/httpd.conf for basic |
authentication on a per url basis. |
Example for httpd.conf file: |
/adm:toor:PaSsWd |
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5 |
bool "Support MD5-encrypted passwords in HTTP authentication" |
bool "Support MD5 crypted passwords for http Authentication" |
default BUSYBOX_DEFAULT_FEATURE_HTTPD_AUTH_MD5 |
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH |
help |
Enables encrypted passwords, and wildcard user/passwords |
in httpd.conf file. |
User '*' means 'any system user name is ok', |
password of '*' means 'use system password for this user' |
Examples: |
/adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0 |
/adm:root:* |
/wiki:*:* |
Enables encrypted passwords, and wildcard user/passwords |
in httpd.conf file. |
User '*' means 'any system user name is ok', |
password of '*' means 'use system password for this user' |
Examples: |
/adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0 |
/adm:root:* |
/wiki:*:* |
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI |
bool "Support Common Gateway Interface (CGI)" |
@@ -225,8 +208,8 @@ |
default BUSYBOX_DEFAULT_FEATURE_HTTPD_CGI |
depends on BUSYBOX_CONFIG_HTTPD |
help |
This option allows scripts and executables to be invoked |
when specific URLs are requested. |
This option allows scripts and executables to be invoked |
when specific URLs are requested. |
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR |
bool "Support running scripts through an interpreter" |
@@ -233,11 +216,11 @@ |
default BUSYBOX_DEFAULT_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR |
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI |
help |
This option enables support for running scripts through an |
interpreter. Turn this on if you want PHP scripts to work |
properly. You need to supply an additional line in your |
httpd.conf file: |
*.php:/path/to/your/php |
This option enables support for running scripts through an |
interpreter. Turn this on if you want PHP scripts to work |
properly. You need to supply an additional line in your |
httpd.conf file: |
*.php:/path/to/your/php |
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV |
bool "Set REMOTE_PORT environment variable for CGI" |
@@ -244,8 +227,8 @@ |
default BUSYBOX_DEFAULT_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV |
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI |
help |
Use of this option can assist scripts in generating |
references that contain a unique port number. |
Use of this option can assist scripts in generating |
references that contain a unique port number. |
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR |
bool "Enable -e option (useful for CGIs written as shell scripts)" |
@@ -252,10 +235,10 @@ |
default BUSYBOX_DEFAULT_FEATURE_HTTPD_ENCODE_URL_STR |
depends on BUSYBOX_CONFIG_HTTPD |
help |
This option allows html encoding of arbitrary strings for display |
by the browser. Output goes to stdout. |
For example, httpd -e "<Hello World>" produces |
"<Hello World>". |
This option allows html encoding of arbitrary strings for display |
by the browser. Output goes to stdout. |
For example, httpd -e "<Hello World>" produces |
"<Hello World>". |
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES |
bool "Support custom error pages" |
@@ -262,13 +245,13 @@ |
default BUSYBOX_DEFAULT_FEATURE_HTTPD_ERROR_PAGES |
depends on BUSYBOX_CONFIG_HTTPD |
help |
This option allows you to define custom error pages in |
the configuration file instead of the default HTTP status |
error pages. For instance, if you add the line: |
E404:/path/e404.html |
in the config file, the server will respond the specified |
'/path/e404.html' file instead of the terse '404 NOT FOUND' |
message. |
This option allows you to define custom error pages in |
the configuration file instead of the default HTTP status |
error pages. For instance, if you add the line: |
E404:/path/e404.html |
in the config file, the server will respond the specified |
'/path/e404.html' file instead of the terse '404 NOT FOUND' |
message. |
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY |
bool "Support reverse proxy" |
@@ -275,12 +258,12 @@ |
default BUSYBOX_DEFAULT_FEATURE_HTTPD_PROXY |
depends on BUSYBOX_CONFIG_HTTPD |
help |
This option allows you to define URLs that will be forwarded |
to another HTTP server. To setup add the following line to the |
configuration file |
P:/url/:http://hostname[:port]/new/path/ |
Then a request to /url/myfile will be forwarded to |
http://hostname[:port]/new/path/myfile. |
This option allows you to define URLs that will be forwarded |
to another HTTP server. To setup add the following line to the |
configuration file |
P:/url/:http://hostname[:port]/new/path/ |
Then a request to /url/myfile will be forwarded to |
http://hostname[:port]/new/path/myfile. |
|
config BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP |
bool "Support GZIP content encoding" |
@@ -287,14 +270,14 @@ |
default BUSYBOX_DEFAULT_FEATURE_HTTPD_GZIP |
depends on BUSYBOX_CONFIG_HTTPD |
help |
Makes httpd send files using GZIP content encoding if the |
client supports it and a pre-compressed <file>.gz exists. |
Makes httpd send files using GZIP content encoding if the |
client supports it and a pre-compressed <file>.gz exists. |
config BUSYBOX_CONFIG_IFCONFIG |
bool "ifconfig (12 kb)" |
bool "ifconfig" |
default BUSYBOX_DEFAULT_IFCONFIG |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
Ifconfig is used to configure the kernel-resident network interfaces. |
Ifconfig is used to configure the kernel-resident network interfaces. |
|
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS |
bool "Enable status reporting output (+7k)" |
@@ -301,8 +284,8 @@ |
default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_STATUS |
depends on BUSYBOX_CONFIG_IFCONFIG |
help |
If ifconfig is called with no arguments it will display the status |
of the currently active interfaces. |
If ifconfig is called with no arguments it will display the status |
of the currently active interfaces. |
|
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP |
bool "Enable slip-specific options \"keepalive\" and \"outfill\"" |
@@ -309,8 +292,8 @@ |
default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_SLIP |
depends on BUSYBOX_CONFIG_IFCONFIG |
help |
Allow "keepalive" and "outfill" support for SLIP. If you're not |
planning on using serial lines, leave this unchecked. |
Allow "keepalive" and "outfill" support for SLIP. If you're not |
planning on using serial lines, leave this unchecked. |
|
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ |
bool "Enable options \"mem_start\", \"io_addr\", and \"irq\"" |
@@ -317,8 +300,8 @@ |
default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ |
depends on BUSYBOX_CONFIG_IFCONFIG |
help |
Allow the start address for shared memory, start address for I/O, |
and/or the interrupt line used by the specified device. |
Allow the start address for shared memory, start address for I/O, |
and/or the interrupt line used by the specified device. |
|
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW |
bool "Enable option \"hw\" (ether only)" |
@@ -325,9 +308,9 @@ |
default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_HW |
depends on BUSYBOX_CONFIG_IFCONFIG |
help |
Set the hardware address of this interface, if the device driver |
supports this operation. Currently, we only support the 'ether' |
class. |
Set the hardware address of this interface, if the device driver |
supports this operation. Currently, we only support the 'ether' |
class. |
|
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS |
bool "Set the broadcast automatically" |
@@ -334,42 +317,42 @@ |
default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_BROADCAST_PLUS |
depends on BUSYBOX_CONFIG_IFCONFIG |
help |
Setting this will make ifconfig attempt to find the broadcast |
automatically if the value '+' is used. |
Setting this will make ifconfig attempt to find the broadcast |
automatically if the value '+' is used. |
config BUSYBOX_CONFIG_IFENSLAVE |
bool "ifenslave (13 kb)" |
bool "ifenslave" |
default BUSYBOX_DEFAULT_IFENSLAVE |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
Userspace application to bind several interfaces |
to a logical interface (use with kernel bonding driver). |
Userspace application to bind several interfaces |
to a logical interface (use with kernel bonding driver). |
config BUSYBOX_CONFIG_IFPLUGD |
bool "ifplugd (10 kb)" |
bool "ifplugd" |
default BUSYBOX_DEFAULT_IFPLUGD |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
Network interface plug detection daemon. |
Network interface plug detection daemon. |
config BUSYBOX_CONFIG_IFUP |
bool "ifup (14 kb)" |
bool "ifup" |
default BUSYBOX_DEFAULT_IFUP |
help |
Activate the specified interfaces. This applet makes use |
of either "ifconfig" and "route" or the "ip" command to actually |
configure network interfaces. Therefore, you will probably also want |
to enable either IFCONFIG and ROUTE, or enable |
FEATURE_IFUPDOWN_IP and the various IP options. Of |
course you could use non-busybox versions of these programs, so |
against my better judgement (since this will surely result in plenty |
of support questions on the mailing list), I do not force you to |
enable these additional options. It is up to you to supply either |
"ifconfig", "route" and "run-parts" or the "ip" command, either |
via busybox or via standalone utilities. |
Activate the specified interfaces. This applet makes use |
of either "ifconfig" and "route" or the "ip" command to actually |
configure network interfaces. Therefore, you will probably also want |
to enable either IFCONFIG and ROUTE, or enable |
FEATURE_IFUPDOWN_IP and the various IP options. Of |
course you could use non-busybox versions of these programs, so |
against my better judgement (since this will surely result in plenty |
of support questions on the mailing list), I do not force you to |
enable these additional options. It is up to you to supply either |
"ifconfig", "route" and "run-parts" or the "ip" command, either |
via busybox or via standalone utilities. |
|
config BUSYBOX_CONFIG_IFDOWN |
bool "ifdown (13 kb)" |
bool "ifdown" |
default BUSYBOX_DEFAULT_IFDOWN |
help |
Deactivate the specified interfaces. |
Deactivate the specified interfaces. |
|
config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH |
string "Absolute path to ifstate file" |
@@ -376,11 +359,11 @@ |
default BUSYBOX_DEFAULT_IFUPDOWN_IFSTATE_PATH |
depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN |
help |
ifupdown keeps state information in a file called ifstate. |
Typically it is located in /var/run/ifstate, however |
some distributions tend to put it in other places |
(debian, for example, uses /etc/network/run/ifstate). |
This config option defines location of ifstate. |
ifupdown keeps state information in a file called ifstate. |
Typically it is located in /var/run/ifstate, however |
some distributions tend to put it in other places |
(debian, for example, uses /etc/network/run/ifstate). |
This config option defines location of ifstate. |
|
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP |
bool "Use ip tool (else ifconfig/route is used)" |
@@ -387,15 +370,15 @@ |
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IP |
depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN |
help |
Use the iproute "ip" command to implement "ifup" and "ifdown", rather |
than the default of using the older "ifconfig" and "route" utilities. |
Use the iproute "ip" command to implement "ifup" and "ifdown", rather |
than the default of using the older "ifconfig" and "route" utilities. |
|
If Y: you must install either the full-blown iproute2 package |
or enable "ip" applet in busybox, or the "ifup" and "ifdown" applets |
will not work. |
If Y: you must install either the full-blown iproute2 package |
or enable "ip" applet in Busybox, or the "ifup" and "ifdown" applets |
will not work. |
|
If N: you must install either the full-blown ifconfig and route |
utilities, or enable these applets in busybox. |
If N: you must install either the full-blown ifconfig and route |
utilities, or enable these applets in Busybox. |
|
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4 |
bool "Support IPv4" |
@@ -402,7 +385,7 @@ |
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV4 |
depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN |
help |
If you want ifup/ifdown to talk IPv4, leave this on. |
If you want ifup/ifdown to talk IPv4, leave this on. |
|
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6 |
bool "Support IPv6" |
@@ -409,7 +392,7 @@ |
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV6 |
depends on (BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN) && BUSYBOX_CONFIG_FEATURE_IPV6 |
help |
If you need support for IPv6, turn this option on. |
If you need support for IPv6, turn this option on. |
|
|
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING |
@@ -417,8 +400,8 @@ |
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_MAPPING |
depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN |
help |
This enables support for the "mapping" stanza, unless you have |
a weird network setup you don't need it. |
This enables support for the "mapping" stanza, unless you have |
a weird network setup you don't need it. |
|
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP |
bool "Support external DHCP clients" |
@@ -425,134 +408,115 @@ |
default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_EXTERNAL_DHCP |
depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN |
help |
This enables support for the external dhcp clients. Clients are |
tried in the following order: dhcpcd, dhclient, pump and udhcpc. |
Otherwise, if udhcpc applet is enabled, it is used. |
Otherwise, ifup/ifdown will have no support for DHCP. |
This enables support for the external dhcp clients. Clients are |
tried in the following order: dhcpcd, dhclient, pump and udhcpc. |
Otherwise, if udhcpc applet is enabled, it is used. |
Otherwise, ifup/ifdown will have no support for DHCP. |
config BUSYBOX_CONFIG_INETD |
bool "inetd (18 kb)" |
bool "inetd" |
default BUSYBOX_DEFAULT_INETD |
select BUSYBOX_CONFIG_FEATURE_SYSLOG |
help |
Internet superserver daemon |
Internet superserver daemon |
|
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO |
bool "Support echo service on port 7" |
bool "Support echo service" |
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_ECHO |
depends on BUSYBOX_CONFIG_INETD |
help |
Internal service which echoes data back. |
Activated by configuration lines like these: |
echo stream tcp nowait root internal |
echo dgram udp wait root internal |
Echo received data internal inetd service |
|
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD |
bool "Support discard service on port 8" |
bool "Support discard service" |
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD |
depends on BUSYBOX_CONFIG_INETD |
help |
Internal service which discards all input. |
Activated by configuration lines like these: |
discard stream tcp nowait root internal |
discard dgram udp wait root internal |
Internet /dev/null internal inetd service |
|
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME |
bool "Support time service on port 37" |
bool "Support time service" |
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_TIME |
depends on BUSYBOX_CONFIG_INETD |
help |
Internal service which returns big-endian 32-bit number |
of seconds passed since 1900-01-01. The number wraps around |
on overflow. |
Activated by configuration lines like these: |
time stream tcp nowait root internal |
time dgram udp wait root internal |
Return 32 bit time since 1900 internal inetd service |
|
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME |
bool "Support daytime service on port 13" |
bool "Support daytime service" |
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME |
depends on BUSYBOX_CONFIG_INETD |
help |
Internal service which returns human-readable time. |
Activated by configuration lines like these: |
daytime stream tcp nowait root internal |
daytime dgram udp wait root internal |
Return human-readable time internal inetd service |
|
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN |
bool "Support chargen service on port 19" |
bool "Support chargen service" |
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN |
depends on BUSYBOX_CONFIG_INETD |
help |
Internal service which generates endless stream |
of all ASCII chars beetween space and char 126. |
Activated by configuration lines like these: |
chargen stream tcp nowait root internal |
chargen dgram udp wait root internal |
Familiar character generator internal inetd service |
|
config BUSYBOX_CONFIG_FEATURE_INETD_RPC |
bool "Support RPC services" |
default BUSYBOX_DEFAULT_FEATURE_INETD_RPC # very rarely used, and needs Sun RPC support in libc |
depends on BUSYBOX_CONFIG_INETD |
select BUSYBOX_CONFIG_FEATURE_HAVE_RPC |
help |
Support Sun-RPC based services |
Support Sun-RPC based services |
config BUSYBOX_CONFIG_IP |
bool "ip (35 kb)" |
bool "ip" |
default BUSYBOX_DEFAULT_IP |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
The "ip" applet is a TCP/IP interface configuration and routing |
utility. |
Short forms (enabled below) are busybox-specific extensions. |
The standard "ip" utility does not provide them. If you are |
trying to be portable, it's better to use "ip CMD" forms. |
The "ip" applet is a TCP/IP interface configuration and routing |
utility. You generally don't need "ip" to use busybox with |
TCP/IP. |
|
config BUSYBOX_CONFIG_IPADDR |
bool "ipaddr (14 kb)" |
bool "ipaddr" |
default BUSYBOX_DEFAULT_IPADDR |
select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
Short form of "ip addr" |
Support short form of ip addr: ipaddr |
|
config BUSYBOX_CONFIG_IPLINK |
bool "iplink (17 kb)" |
bool "iplink" |
default BUSYBOX_DEFAULT_IPLINK |
select BUSYBOX_CONFIG_FEATURE_IP_LINK |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
Short form of "ip link" |
Support short form of ip link: iplink |
|
config BUSYBOX_CONFIG_IPROUTE |
bool "iproute (15 kb)" |
bool "iproute" |
default BUSYBOX_DEFAULT_IPROUTE |
select BUSYBOX_CONFIG_FEATURE_IP_ROUTE |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
Short form of "ip route" |
Support short form of ip route: iproute |
|
config BUSYBOX_CONFIG_IPTUNNEL |
bool "iptunnel (9.6 kb)" |
bool "iptunnel" |
default BUSYBOX_DEFAULT_IPTUNNEL |
select BUSYBOX_CONFIG_FEATURE_IP_TUNNEL |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
Short form of "ip tunnel" |
Support short form of ip tunnel: iptunnel |
|
config BUSYBOX_CONFIG_IPRULE |
bool "iprule (10 kb)" |
bool "iprule" |
default BUSYBOX_DEFAULT_IPRULE |
select BUSYBOX_CONFIG_FEATURE_IP_RULE |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
Short form of "ip rule" |
Support short form of ip rule: iprule |
|
config BUSYBOX_CONFIG_IPNEIGH |
bool "ipneigh (8.3 kb)" |
bool "ipneigh" |
default BUSYBOX_DEFAULT_IPNEIGH |
select BUSYBOX_CONFIG_FEATURE_IP_NEIGH |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
Short form of "ip neigh" |
Support short form of ip neigh: ipneigh |
|
config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS |
bool "ip address" |
@@ -559,7 +523,7 @@ |
default BUSYBOX_DEFAULT_FEATURE_IP_ADDRESS |
depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPADDR |
help |
Address manipulation support for the "ip" applet. |
Address manipulation support for the "ip" applet. |
|
config BUSYBOX_CONFIG_FEATURE_IP_LINK |
bool "ip link" |
@@ -566,7 +530,7 @@ |
default BUSYBOX_DEFAULT_FEATURE_IP_LINK |
depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPLINK |
help |
Configure network devices with "ip". |
Configure network devices with "ip". |
|
config BUSYBOX_CONFIG_FEATURE_IP_ROUTE |
bool "ip route" |
@@ -573,7 +537,7 @@ |
default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE |
depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPROUTE |
help |
Add support for routing table management to "ip". |
Add support for routing table management to "ip". |
|
config BUSYBOX_CONFIG_FEATURE_IP_ROUTE_DIR |
string "ip route configuration directory" |
@@ -580,7 +544,7 @@ |
default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE_DIR |
depends on BUSYBOX_CONFIG_FEATURE_IP_ROUTE |
help |
Location of the "ip" applet routing configuration. |
Location of the "ip" applet routing configuration. |
|
config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL |
bool "ip tunnel" |
@@ -587,7 +551,7 @@ |
default BUSYBOX_DEFAULT_FEATURE_IP_TUNNEL |
depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPTUNNEL |
help |
Add support for tunneling commands to "ip". |
Add support for tunneling commands to "ip". |
|
config BUSYBOX_CONFIG_FEATURE_IP_RULE |
bool "ip rule" |
@@ -594,7 +558,7 @@ |
default BUSYBOX_DEFAULT_FEATURE_IP_RULE |
depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPRULE |
help |
Add support for rule commands to "ip". |
Add support for rule commands to "ip". |
|
config BUSYBOX_CONFIG_FEATURE_IP_NEIGH |
bool "ip neighbor" |
@@ -601,7 +565,7 @@ |
default BUSYBOX_DEFAULT_FEATURE_IP_NEIGH |
depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPNEIGH |
help |
Add support for neighbor commands to "ip". |
Add support for neighbor commands to "ip". |
|
config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS |
bool "Support displaying rarely used link types" |
@@ -608,16 +572,16 @@ |
default BUSYBOX_DEFAULT_FEATURE_IP_RARE_PROTOCOLS |
depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPADDR || BUSYBOX_CONFIG_IPLINK || BUSYBOX_CONFIG_IPROUTE || BUSYBOX_CONFIG_IPTUNNEL || BUSYBOX_CONFIG_IPRULE || BUSYBOX_CONFIG_IPNEIGH |
help |
If you are not going to use links of type "frad", "econet", |
"bif" etc, you probably don't need to enable this. |
Ethernet, wireless, infrared, ppp/slip, ip tunnelling |
link types are supported without this option selected. |
If you are not going to use links of type "frad", "econet", |
"bif" etc, you probably don't need to enable this. |
Ethernet, wireless, infrared, ppp/slip, ip tunnelling |
link types are supported without this option selected. |
config BUSYBOX_CONFIG_IPCALC |
bool "ipcalc (4.4 kb)" |
bool "ipcalc" |
default BUSYBOX_DEFAULT_IPCALC |
help |
ipcalc takes an IP address and netmask and calculates the |
resulting broadcast, network, and host range. |
ipcalc takes an IP address and netmask and calculates the |
resulting broadcast, network, and host range. |
|
config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS |
bool "Enable long options" |
@@ -629,30 +593,30 @@ |
default BUSYBOX_DEFAULT_FEATURE_IPCALC_FANCY |
depends on BUSYBOX_CONFIG_IPCALC |
help |
Adds the options hostname, prefix and silent to the output of |
"ipcalc". |
Adds the options hostname, prefix and silent to the output of |
"ipcalc". |
config BUSYBOX_CONFIG_FAKEIDENTD |
bool "fakeidentd (8.7 kb)" |
bool "fakeidentd" |
default BUSYBOX_DEFAULT_FAKEIDENTD |
select BUSYBOX_CONFIG_FEATURE_SYSLOG |
help |
fakeidentd listens on the ident port and returns a predefined |
fake value on any query. |
fakeidentd listens on the ident port and returns a predefined |
fake value on any query. |
config BUSYBOX_CONFIG_NAMEIF |
bool "nameif (6.6 kb)" |
bool "nameif" |
default BUSYBOX_DEFAULT_NAMEIF |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
select BUSYBOX_CONFIG_FEATURE_SYSLOG |
help |
nameif is used to rename network interface by its MAC address. |
Renamed interfaces MUST be in the down state. |
It is possible to use a file (default: /etc/mactab) |
with list of new interface names and MACs. |
Maximum interface name length: IFNAMSIZ = 16 |
File fields are separated by space or tab. |
File format: |
# Comment |
new_interface_name XX:XX:XX:XX:XX:XX |
nameif is used to rename network interface by its MAC address. |
Renamed interfaces MUST be in the down state. |
It is possible to use a file (default: /etc/mactab) |
with list of new interface names and MACs. |
Maximum interface name length: IFNAMSIZ = 16 |
File fields are separated by space or tab. |
File format: |
# Comment |
new_interface_name XX:XX:XX:XX:XX:XX |
|
config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED |
bool "Extended nameif" |
@@ -659,57 +623,51 @@ |
default BUSYBOX_DEFAULT_FEATURE_NAMEIF_EXTENDED |
depends on BUSYBOX_CONFIG_NAMEIF |
help |
This extends the nameif syntax to support the bus_info, driver, |
phyaddr selectors. The syntax is compatible to the normal nameif. |
File format: |
new_interface_name driver=asix bus=usb-0000:00:08.2-3 |
new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5 |
new_interface_name phy_address=2 00:80:C8:38:91:B5 |
new_interface_name mac=00:80:C8:38:91:B5 |
new_interface_name 00:80:C8:38:91:B5 |
This extends the nameif syntax to support the bus_info, driver, |
phyaddr selectors. The syntax is compatible to the normal nameif. |
File format: |
new_interface_name driver=asix bus=usb-0000:00:08.2-3 |
new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5 |
new_interface_name phy_address=2 00:80:C8:38:91:B5 |
new_interface_name mac=00:80:C8:38:91:B5 |
new_interface_name 00:80:C8:38:91:B5 |
config BUSYBOX_CONFIG_NBDCLIENT |
bool "nbd-client (6 kb)" |
bool "nbd-client" |
default BUSYBOX_DEFAULT_NBDCLIENT |
help |
Network block device client |
Network block device client |
config BUSYBOX_CONFIG_NC |
bool "nc (11 kb)" |
bool "nc" |
default BUSYBOX_DEFAULT_NC |
help |
A simple Unix utility which reads and writes data across network |
connections. |
A simple Unix utility which reads and writes data across network |
connections. |
|
config BUSYBOX_CONFIG_NETCAT |
bool "netcat (11 kb)" |
default BUSYBOX_DEFAULT_NETCAT |
help |
Alias to nc. |
|
config BUSYBOX_CONFIG_NC_SERVER |
bool "Netcat server options (-l)" |
default BUSYBOX_DEFAULT_NC_SERVER |
depends on BUSYBOX_CONFIG_NC || BUSYBOX_CONFIG_NETCAT |
depends on BUSYBOX_CONFIG_NC |
help |
Allow netcat to act as a server. |
Allow netcat to act as a server. |
|
config BUSYBOX_CONFIG_NC_EXTRA |
bool "Netcat extensions (-eiw and -f FILE)" |
default BUSYBOX_DEFAULT_NC_EXTRA |
depends on BUSYBOX_CONFIG_NC || BUSYBOX_CONFIG_NETCAT |
depends on BUSYBOX_CONFIG_NC |
help |
Add -e (support for executing the rest of the command line after |
making or receiving a successful connection), -i (delay interval for |
lines sent), -w (timeout for initial connection). |
Add -e (support for executing the rest of the command line after |
making or receiving a successful connection), -i (delay interval for |
lines sent), -w (timeout for initial connection). |
|
config BUSYBOX_CONFIG_NC_110_COMPAT |
bool "Netcat 1.10 compatibility (+2.5k)" |
default BUSYBOX_DEFAULT_NC_110_COMPAT |
depends on BUSYBOX_CONFIG_NC || BUSYBOX_CONFIG_NETCAT |
default BUSYBOX_DEFAULT_NC_110_COMPAT # off specially for Rob |
depends on BUSYBOX_CONFIG_NC |
help |
This option makes nc closely follow original nc-1.10. |
The code is about 2.5k bigger. It enables |
-s ADDR, -n, -u, -v, -o FILE, -z options, but loses |
busybox-specific extensions: -f FILE. |
This option makes nc closely follow original nc-1.10. |
The code is about 2.5k bigger. It enables |
-s ADDR, -n, -u, -v, -o FILE, -z options, but loses |
busybox-specific extensions: -f FILE. |
config BUSYBOX_CONFIG_NETMSG |
bool "netmsg" |
default BUSYBOX_DEFAULT_NETMSG |
@@ -716,11 +674,11 @@ |
help |
simple program for sending udp broadcast messages |
config BUSYBOX_CONFIG_NETSTAT |
bool "netstat (10 kb)" |
bool "netstat" |
default BUSYBOX_DEFAULT_NETSTAT |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
netstat prints information about the Linux networking subsystem. |
netstat prints information about the Linux networking subsystem. |
|
config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE |
bool "Enable wide output" |
@@ -727,8 +685,8 @@ |
default BUSYBOX_DEFAULT_FEATURE_NETSTAT_WIDE |
depends on BUSYBOX_CONFIG_NETSTAT |
help |
Add support for wide columns. Useful when displaying IPv6 addresses |
(-W option). |
Add support for wide columns. Useful when displaying IPv6 addresses |
(-W option). |
|
config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG |
bool "Enable PID/Program name output" |
@@ -735,29 +693,19 @@ |
default BUSYBOX_DEFAULT_FEATURE_NETSTAT_PRG |
depends on BUSYBOX_CONFIG_NETSTAT |
help |
Add support for -p flag to print out PID and program name. |
+700 bytes of code. |
Add support for -p flag to print out PID and program name. |
+700 bytes of code. |
config BUSYBOX_CONFIG_NSLOOKUP |
bool "nslookup (9.7 kb)" |
bool "nslookup" |
default BUSYBOX_DEFAULT_NSLOOKUP |
help |
nslookup is a tool to query Internet name servers. |
|
config BUSYBOX_CONFIG_FEATURE_NSLOOKUP_BIG |
bool "Use internal resolver code instead of libc" |
depends on BUSYBOX_CONFIG_NSLOOKUP |
default BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_BIG |
|
config BUSYBOX_CONFIG_FEATURE_NSLOOKUP_LONG_OPTIONS |
bool "Enable long options" |
default BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_LONG_OPTIONS |
depends on BUSYBOX_CONFIG_FEATURE_NSLOOKUP_BIG && BUSYBOX_CONFIG_LONG_OPTS |
nslookup is a tool to query Internet name servers. |
config BUSYBOX_CONFIG_NSLOOKUP_OPENWRT |
bool "nslookup_openwrt" |
bool "nslookup_lede" |
depends on !BUSYBOX_CONFIG_NSLOOKUP |
default BUSYBOX_DEFAULT_NSLOOKUP_OPENWRT |
help |
nslookup is a tool to query Internet name servers (LEDE flavor). |
nslookup is a tool to query Internet name servers (OpenWrt flavor). |
|
config BUSYBOX_CONFIG_FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS |
bool "Enable long options" |
@@ -766,11 +714,11 @@ |
help |
Support long options for the nslookup applet. |
config BUSYBOX_CONFIG_NTPD |
bool "ntpd (22 kb)" |
bool "ntpd" |
default BUSYBOX_DEFAULT_NTPD |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
The NTP client/server daemon. |
The NTP client/server daemon. |
|
config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER |
bool "Make ntpd usable as a NTP server" |
@@ -777,8 +725,8 @@ |
default BUSYBOX_DEFAULT_FEATURE_NTPD_SERVER |
depends on BUSYBOX_CONFIG_NTPD |
help |
Make ntpd usable as a NTP server. If you disable this option |
ntpd will be usable only as a NTP client. |
Make ntpd usable as a NTP server. If you disable this option |
ntpd will be usable only as a NTP client. |
|
config BUSYBOX_CONFIG_FEATURE_NTPD_CONF |
bool "Make ntpd understand /etc/ntp.conf" |
@@ -785,27 +733,22 @@ |
default BUSYBOX_DEFAULT_FEATURE_NTPD_CONF |
depends on BUSYBOX_CONFIG_NTPD |
help |
Make ntpd look in /etc/ntp.conf for peers. Only "server address" |
is supported. |
|
config BUSYBOX_CONFIG_FEATURE_NTP_AUTH |
bool "Support md5/sha1 message authentication codes" |
default BUSYBOX_DEFAULT_FEATURE_NTP_AUTH |
depends on BUSYBOX_CONFIG_NTPD |
Make ntpd look in /etc/ntp.conf for peers. Only "server address" |
is supported. |
config BUSYBOX_CONFIG_PING |
bool "ping (10 kb)" |
bool "ping" |
default BUSYBOX_DEFAULT_PING |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to |
elicit an ICMP ECHO_RESPONSE from a host or gateway. |
ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to |
elicit an ICMP ECHO_RESPONSE from a host or gateway. |
|
config BUSYBOX_CONFIG_PING6 |
bool "ping6 (11 kb)" |
bool "ping6" |
default BUSYBOX_DEFAULT_PING6 |
depends on BUSYBOX_CONFIG_FEATURE_IPV6 |
help |
Alias to "ping -6". |
This will give you a ping that can talk IPv6. |
|
config BUSYBOX_CONFIG_FEATURE_FANCY_PING |
bool "Enable fancy ping output" |
@@ -812,61 +755,51 @@ |
default BUSYBOX_DEFAULT_FEATURE_FANCY_PING |
depends on BUSYBOX_CONFIG_PING || BUSYBOX_CONFIG_PING6 |
help |
With this option off, ping will say "HOST is alive!" |
or terminate with SIGALRM in 5 seconds otherwise. |
No command-line options will be recognized. |
Make the output from the ping applet include statistics, and at the |
same time provide full support for ICMP packets. |
config BUSYBOX_CONFIG_PSCAN |
bool "pscan (6 kb)" |
bool "pscan" |
default BUSYBOX_DEFAULT_PSCAN |
help |
Simple network port scanner. |
Simple network port scanner. |
config BUSYBOX_CONFIG_ROUTE |
bool "route (8.7 kb)" |
bool "route" |
default BUSYBOX_DEFAULT_ROUTE |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
Route displays or manipulates the kernel's IP routing tables. |
Route displays or manipulates the kernel's IP routing tables. |
config BUSYBOX_CONFIG_SLATTACH |
bool "slattach (6.2 kb)" |
bool "slattach" |
default BUSYBOX_DEFAULT_SLATTACH |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
slattach configures serial line as SLIP network interface. |
slattach is a small utility to attach network interfaces to serial |
lines. |
config BUSYBOX_CONFIG_SSL_CLIENT |
bool "ssl_client (25 kb)" |
bool "ssl_client" |
default BUSYBOX_DEFAULT_SSL_CLIENT |
select BUSYBOX_CONFIG_TLS |
help |
This tool pipes data to/from a socket, TLS-encrypting it. |
config BUSYBOX_CONFIG_TC |
bool "tc (8.3 kb)" |
default BUSYBOX_DEFAULT_TC |
help |
Show / manipulate traffic control settings |
|
config BUSYBOX_CONFIG_FEATURE_TC_INGRESS |
bool "Enable ingress" |
default BUSYBOX_DEFAULT_FEATURE_TC_INGRESS |
depends on BUSYBOX_CONFIG_TC |
This tool pipes data to/from a socket, TLS-encrypting it. |
config BUSYBOX_CONFIG_TCPSVD |
bool "tcpsvd (14 kb)" |
bool "tcpsvd" |
default BUSYBOX_DEFAULT_TCPSVD |
help |
tcpsvd listens on a TCP port and runs a program for each new |
connection. |
tcpsvd listens on a TCP port and runs a program for each new |
connection. |
|
config BUSYBOX_CONFIG_UDPSVD |
bool "udpsvd (13 kb)" |
bool "udpsvd" |
default BUSYBOX_DEFAULT_UDPSVD |
help |
udpsvd listens on an UDP port and runs a program for each new |
connection. |
udpsvd listens on an UDP port and runs a program for each new |
connection. |
config BUSYBOX_CONFIG_TELNET |
bool "telnet (8.8 kb)" |
bool "telnet" |
default BUSYBOX_DEFAULT_TELNET |
help |
Telnet is an interface to the TELNET protocol, but is also commonly |
used to test other simple protocols. |
Telnet is an interface to the TELNET protocol, but is also commonly |
used to test other simple protocols. |
|
config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE |
bool "Pass TERM type to remote host" |
@@ -873,9 +806,9 @@ |
default BUSYBOX_DEFAULT_FEATURE_TELNET_TTYPE |
depends on BUSYBOX_CONFIG_TELNET |
help |
Setting this option will forward the TERM environment variable to the |
remote host you are connecting to. This is useful to make sure that |
things like ANSI colors and other control sequences behave. |
Setting this option will forward the TERM environment variable to the |
remote host you are connecting to. This is useful to make sure that |
things like ANSI colors and other control sequences behave. |
|
config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN |
bool "Pass USER type to remote host" |
@@ -882,10 +815,10 @@ |
default BUSYBOX_DEFAULT_FEATURE_TELNET_AUTOLOGIN |
depends on BUSYBOX_CONFIG_TELNET |
help |
Setting this option will forward the USER environment variable to the |
remote host you are connecting to. This is useful when you need to |
log into a machine without telling the username (autologin). This |
option enables '-a' and '-l USER' options. |
Setting this option will forward the USER environment variable to the |
remote host you are connecting to. This is useful when you need to |
log into a machine without telling the username (autologin). This |
option enables `-a' and `-l USER' arguments. |
|
config BUSYBOX_CONFIG_FEATURE_TELNET_WIDTH |
bool "Enable window size autodetection" |
@@ -892,45 +825,45 @@ |
default BUSYBOX_DEFAULT_FEATURE_TELNET_WIDTH |
depends on BUSYBOX_CONFIG_TELNET |
config BUSYBOX_CONFIG_TELNETD |
bool "telnetd (12 kb)" |
bool "telnetd" |
default BUSYBOX_DEFAULT_TELNETD |
select BUSYBOX_CONFIG_FEATURE_SYSLOG |
help |
A daemon for the TELNET protocol, allowing you to log onto the host |
running the daemon. Please keep in mind that the TELNET protocol |
sends passwords in plain text. If you can't afford the space for an |
SSH daemon and you trust your network, you may say 'y' here. As a |
more secure alternative, you should seriously consider installing the |
very small Dropbear SSH daemon instead: |
A daemon for the TELNET protocol, allowing you to log onto the host |
running the daemon. Please keep in mind that the TELNET protocol |
sends passwords in plain text. If you can't afford the space for an |
SSH daemon and you trust your network, you may say 'y' here. As a |
more secure alternative, you should seriously consider installing the |
very small Dropbear SSH daemon instead: |
http://matt.ucc.asn.au/dropbear/dropbear.html |
|
Note that for busybox telnetd to work you need several things: |
First of all, your kernel needs: |
Note that for busybox telnetd to work you need several things: |
First of all, your kernel needs: |
CONFIG_UNIX98_PTYS=y |
|
Next, you need a /dev/pts directory on your root filesystem: |
Next, you need a /dev/pts directory on your root filesystem: |
|
$ ls -ld /dev/pts |
drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/ |
|
Next you need the pseudo terminal master multiplexer /dev/ptmx: |
Next you need the pseudo terminal master multiplexer /dev/ptmx: |
|
$ ls -la /dev/ptmx |
crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx |
|
Any /dev/ttyp[0-9]* files you may have can be removed. |
Next, you need to mount the devpts filesystem on /dev/pts using: |
Any /dev/ttyp[0-9]* files you may have can be removed. |
Next, you need to mount the devpts filesystem on /dev/pts using: |
|
mount -t devpts devpts /dev/pts |
|
You need to be sure that busybox has LOGIN and |
FEATURE_SUID enabled. And finally, you should make |
certain that busybox has been installed setuid root: |
You need to be sure that busybox has LOGIN and |
FEATURE_SUID enabled. And finally, you should make |
certain that Busybox has been installed setuid root: |
|
chown root.root /bin/busybox |
chmod 4755 /bin/busybox |
|
with all that done, telnetd _should_ work.... |
with all that done, telnetd _should_ work.... |
|
config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE |
bool "Support standalone telnetd (not inetd only)" |
@@ -937,7 +870,7 @@ |
default BUSYBOX_DEFAULT_FEATURE_TELNETD_STANDALONE |
depends on BUSYBOX_CONFIG_TELNETD |
help |
Selecting this will make telnetd able to run standalone. |
Selecting this will make telnetd able to run standalone. |
|
config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT |
bool "Support -w SEC option (inetd wait mode)" |
@@ -944,55 +877,53 @@ |
default BUSYBOX_DEFAULT_FEATURE_TELNETD_INETD_WAIT |
depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE |
help |
This option allows you to run telnetd in "inet wait" mode. |
Example inetd.conf line (note "wait", not usual "nowait"): |
This option allows you to run telnetd in "inet wait" mode. |
Example inetd.conf line (note "wait", not usual "nowait"): |
|
telnet stream tcp wait root /bin/telnetd telnetd -w10 |
telnet stream tcp wait root /bin/telnetd telnetd -w10 |
|
In this example, inetd passes _listening_ socket_ as fd 0 |
to telnetd when connection appears. |
telnetd will wait for connections until all existing |
connections are closed, and no new connections |
appear during 10 seconds. Then it exits, and inetd continues |
to listen for new connections. |
In this example, inetd passes _listening_ socket_ as fd 0 |
to telnetd when connection appears. |
telnetd will wait for connections until all existing |
connections are closed, and no new connections |
appear during 10 seconds. Then it exits, and inetd continues |
to listen for new connections. |
|
This option is rarely used. "tcp nowait" is much more usual |
way of running tcp services, including telnetd. |
You most probably want to say N here. |
This option is rarely used. "tcp nowait" is much more usual |
way of running tcp services, including telnetd. |
You most probably want to say N here. |
config BUSYBOX_CONFIG_TFTP |
bool "tftp (11 kb)" |
bool "tftp" |
default BUSYBOX_DEFAULT_TFTP |
help |
Trivial File Transfer Protocol client. TFTP is usually used |
for simple, small transfers such as a root image |
for a network-enabled bootloader. |
This enables the Trivial File Transfer Protocol client program. TFTP |
is usually used for simple, small transfers such as a root image |
for a network-enabled bootloader. |
|
config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR |
bool "Enable progress bar" |
default BUSYBOX_DEFAULT_FEATURE_TFTP_PROGRESS_BAR |
depends on BUSYBOX_CONFIG_TFTP |
|
config BUSYBOX_CONFIG_TFTPD |
bool "tftpd (10 kb)" |
bool "tftpd" |
default BUSYBOX_DEFAULT_TFTPD |
help |
Trivial File Transfer Protocol server. |
It expects that stdin is a datagram socket and a packet |
is already pending on it. It will exit after one transfer. |
In other words: it should be run from inetd in nowait mode, |
or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR" |
This enables the Trivial File Transfer Protocol server program. |
It expects that stdin is a datagram socket and a packet |
is already pending on it. It will exit after one transfer. |
In other words: it should be run from inetd in nowait mode, |
or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR" |
|
comment "Common options for tftp/tftpd" |
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD |
|
config BUSYBOX_CONFIG_FEATURE_TFTP_GET |
bool "Enable 'tftp get' and/or tftpd upload code" |
default BUSYBOX_DEFAULT_FEATURE_TFTP_GET |
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD |
help |
Add support for the GET command within the TFTP client. This allows |
a client to retrieve a file from a TFTP server. |
Also enable upload support in tftpd, if tftpd is selected. |
Add support for the GET command within the TFTP client. This allows |
a client to retrieve a file from a TFTP server. |
Also enable upload support in tftpd, if tftpd is selected. |
|
Note: this option does _not_ make tftpd capable of download |
(the usual operation people need from it)! |
Note: this option does _not_ make tftpd capable of download |
(the usual operation people need from it)! |
|
config BUSYBOX_CONFIG_FEATURE_TFTP_PUT |
bool "Enable 'tftp put' and/or tftpd download code" |
@@ -999,9 +930,9 @@ |
default BUSYBOX_DEFAULT_FEATURE_TFTP_PUT |
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD |
help |
Add support for the PUT command within the TFTP client. This allows |
a client to transfer a file to a TFTP server. |
Also enable download support in tftpd, if tftpd is selected. |
Add support for the PUT command within the TFTP client. This allows |
a client to transfer a file to a TFTP server. |
Also enable download support in tftpd, if tftpd is selected. |
|
config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE |
bool "Enable 'blksize' and 'tsize' protocol options" |
@@ -1008,32 +939,37 @@ |
default BUSYBOX_DEFAULT_FEATURE_TFTP_BLOCKSIZE |
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD |
help |
Allow tftp to specify block size, and tftpd to understand |
"blksize" and "tsize" options. |
Allow tftp to specify block size, and tftpd to understand |
"blksize" and "tsize" options. |
|
config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR |
bool "Enable progress bar" |
default BUSYBOX_DEFAULT_FEATURE_TFTP_PROGRESS_BAR |
depends on BUSYBOX_CONFIG_TFTP && BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE |
|
config BUSYBOX_CONFIG_TFTP_DEBUG |
bool "Enable debug" |
default BUSYBOX_DEFAULT_TFTP_DEBUG |
depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD |
help |
Make tftp[d] print debugging messages on stderr. |
This is useful if you are diagnosing a bug in tftp[d]. |
Make tftp[d] print debugging messages on stderr. |
This is useful if you are diagnosing a bug in tftp[d]. |
config BUSYBOX_CONFIG_TLS |
bool #No description makes it a hidden option |
default BUSYBOX_DEFAULT_TLS |
config BUSYBOX_CONFIG_TRACEROUTE |
bool "traceroute (11 kb)" |
bool "traceroute" |
default BUSYBOX_DEFAULT_TRACEROUTE |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
Utility to trace the route of IP packets. |
Utility to trace the route of IP packets. |
|
config BUSYBOX_CONFIG_TRACEROUTE6 |
bool "traceroute6 (13 kb)" |
bool "traceroute6" |
default BUSYBOX_DEFAULT_TRACEROUTE6 |
depends on BUSYBOX_CONFIG_FEATURE_IPV6 |
help |
Utility to trace the route of IPv6 packets. |
Utility to trace the route of IPv6 packets. |
|
config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE |
bool "Enable verbose output" |
@@ -1040,8 +976,8 @@ |
default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_VERBOSE |
depends on BUSYBOX_CONFIG_TRACEROUTE || BUSYBOX_CONFIG_TRACEROUTE6 |
help |
Add some verbosity to traceroute. This includes among other things |
hostnames and ICMP response types. |
Add some verbosity to traceroute. This includes among other things |
hostnames and ICMP response types. |
|
config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP |
bool "Enable -I option (use ICMP instead of UDP)" |
@@ -1048,11 +984,11 @@ |
default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_USE_ICMP |
depends on BUSYBOX_CONFIG_TRACEROUTE || BUSYBOX_CONFIG_TRACEROUTE6 |
config BUSYBOX_CONFIG_TUNCTL |
bool "tunctl (6.2 kb)" |
bool "tunctl" |
default BUSYBOX_DEFAULT_TUNCTL |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
tunctl creates or deletes tun devices. |
tunctl creates or deletes tun devices. |
|
config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG |
bool "Support owner:group assignment" |
@@ -1059,20 +995,20 @@ |
default BUSYBOX_DEFAULT_FEATURE_TUNCTL_UG |
depends on BUSYBOX_CONFIG_TUNCTL |
help |
Allow to specify owner and group of newly created interface. |
340 bytes of pure bloat. Say no here. |
Allow to specify owner and group of newly created interface. |
340 bytes of pure bloat. Say no here. |
config BUSYBOX_CONFIG_VCONFIG |
bool "vconfig (2.3 kb)" |
bool "vconfig" |
default BUSYBOX_DEFAULT_VCONFIG |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
help |
Creates, removes, and configures VLAN interfaces |
Creates, removes, and configures VLAN interfaces |
config BUSYBOX_CONFIG_WGET |
bool "wget (38 kb)" |
bool "wget" |
default BUSYBOX_DEFAULT_WGET |
help |
wget is a utility for non-interactive download of files from HTTP |
and FTP servers. |
wget is a utility for non-interactive download of files from HTTP |
and FTP servers. |
|
config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS |
bool "Enable long options" |
@@ -1089,7 +1025,7 @@ |
default BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION |
depends on BUSYBOX_CONFIG_WGET |
help |
Support authenticated HTTP transfers. |
Support authenticated HTTP transfers. |
|
config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT |
bool "Enable timeout option -T SEC" |
@@ -1096,14 +1032,14 @@ |
default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT |
depends on BUSYBOX_CONFIG_WGET |
help |
Supports network read and connect timeouts for wget, |
so that wget will give up and timeout, through the -T |
command line option. |
Supports network read and connect timeouts for wget, |
so that wget will give up and timeout, through the -T |
command line option. |
|
Currently only connect and network data read timeout are |
supported (i.e., timeout is not applied to the DNS query). When |
FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option |
will work in addition to -T. |
Currently only connect and network data read timeout are |
supported (i.e., timeout is not applied to the DNS query). When |
FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option |
will work in addition to -T. |
|
config BUSYBOX_CONFIG_FEATURE_WGET_HTTPS |
bool "Support HTTPS using internal TLS code" |
@@ -1111,43 +1047,43 @@ |
depends on BUSYBOX_CONFIG_WGET |
select BUSYBOX_CONFIG_TLS |
help |
wget will use internal TLS code to connect to https:// URLs. |
Note: |
On NOMMU machines, ssl_helper applet should be available |
in the $PATH for this to work. Make sure to select that applet. |
wget will use internal TLS code to connect to https:// URLs. |
Note: |
On NOMMU machines, ssl_helper applet should be available |
in the $PATH for this to work. Make sure to select that applet. |
|
Note: currently, TLS code only makes TLS I/O work, it |
does *not* check that the peer is who it claims to be, etc. |
IOW: it uses peer-supplied public keys to establish encryption |
and signing keys, then encrypts and signs outgoing data and |
decrypts incoming data. |
It does not check signature hashes on the incoming data: |
this means that attackers manipulating TCP packets can |
send altered data and we unknowingly receive garbage. |
(This check might be relatively easy to add). |
It does not check public key's certificate: |
this means that the peer may be an attacker impersonating |
the server we think we are talking to. |
Note: currently, TLS code only makes TLS I/O work, it |
does *not* check that the peer is who it claims to be, etc. |
IOW: it uses peer-supplied public keys to establish encryption |
and signing keys, then encrypts and signs outgoing data and |
decrypts incoming data. |
It does not check signature hashes on the incoming data: |
this means that attackers manipulating TCP packets can |
send altered data and we unknowingly receive garbage. |
(This check might be relatively easy to add). |
It does not check public key's certificate: |
this means that the peer may be an attacker impersonating |
the server we think we are talking to. |
|
If you think this is unacceptable, consider this. As more and more |
servers switch to HTTPS-only operation, without such "crippled" |
TLS code it is *impossible* to simply download a kernel source |
from kernel.org. Which can in real world translate into |
"my small automatic tooling to build cross-compilers from sources |
no longer works, I need to additionally keep a local copy |
of ~4 megabyte source tarball of a SSL library and ~2 megabyte |
source of wget, need to compile and built both before I can |
download anything. All this despite the fact that the build |
is done in a QEMU sandbox on a machine with absolutely nothing |
worth stealing, so I don't care if someone would go to a lot |
of trouble to intercept my HTTPS download to send me an altered |
kernel tarball". |
If you think this is unacceptable, consider this. As more and more |
servers switch to HTTPS-only operation, without such "crippled" |
TLS code it is *impossible* to simply download a kernel source |
from kernel.org. Which can in real world translate into |
"my small automatic tooling to build cross-compilers from sources |
no longer works, I need to additionally keep a local copy |
of ~4 megabyte source tarball of a SSL library and ~2 megabyte |
source of wget, need to compile and built both before I can |
download anything. All this despite the fact that the build |
is done in a QEMU sandbox on a machine with absolutely nothing |
worth stealing, so I don't care if someone would go to a lot |
of trouble to intercept my HTTPS download to send me an altered |
kernel tarball". |
|
If you still think this is unacceptable, send patches. |
If you still think this is unacceptable, send patches. |
|
If you still think this is unacceptable, do not want to send |
patches, but do want to waste bandwidth expaining how wrong |
it is, you will be ignored. |
If you still think this is unacceptable, do not want to send |
patches, but do want to waste bandwidth expaining how wrong |
it is, you will be ignored. |
|
config BUSYBOX_CONFIG_FEATURE_WGET_OPENSSL |
bool "Try to connect to HTTPS using openssl" |
@@ -1154,42 +1090,42 @@ |
default BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL |
depends on BUSYBOX_CONFIG_WGET |
help |
Try to use openssl to handle HTTPS. |
Try to use openssl to handle HTTPS. |
|
OpenSSL has a simple SSL client for debug purposes. |
If you select this option, wget will effectively run: |
"openssl s_client -quiet -connect hostname:443 |
-servername hostname 2>/dev/null" and pipe its data |
through it. -servername is not used if hostname is numeric. |
Note inconvenient API: host resolution is done twice, |
and there is no guarantee openssl's idea of IPv6 address |
format is the same as ours. |
Another problem is that s_client prints debug information |
to stderr, and it needs to be suppressed. This means |
all error messages get suppressed too. |
openssl is also a big binary, often dynamically linked |
against ~15 libraries. |
OpenSSL has a simple SSL client for debug purposes. |
If you select this option, wget will effectively run: |
"openssl s_client -quiet -connect hostname:443 |
-servername hostname 2>/dev/null" and pipe its data |
through it. -servername is not used if hostname is numeric. |
Note inconvenient API: host resolution is done twice, |
and there is no guarantee openssl's idea of IPv6 address |
format is the same as ours. |
Another problem is that s_client prints debug information |
to stderr, and it needs to be suppressed. This means |
all error messages get suppressed too. |
openssl is also a big binary, often dynamically linked |
against ~15 libraries. |
|
If openssl can't be executed, internal TLS code will be used |
(if you enabled it); if openssl can be executed but fails later, |
wget can't detect this, and download will fail. |
If openssl can't be executed, internal TLS code will be used |
(if you enabled it); if openssl can be executed but fails later, |
wget can't detect this, and download will fail. |
config BUSYBOX_CONFIG_WHOIS |
bool "whois (6.3 kb)" |
bool "whois" |
default BUSYBOX_DEFAULT_WHOIS |
help |
whois is a client for the whois directory service |
whois is a client for the whois directory service |
config BUSYBOX_CONFIG_ZCIP |
bool "zcip (8.4 kb)" |
bool "zcip" |
default BUSYBOX_DEFAULT_ZCIP |
select BUSYBOX_CONFIG_PLATFORM_LINUX |
select BUSYBOX_CONFIG_FEATURE_SYSLOG |
help |
ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927. |
It's a daemon that allocates and defends a dynamically assigned |
address on the 169.254/16 network, requiring no system administrator. |
ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927. |
It's a daemon that allocates and defends a dynamically assigned |
address on the 169.254/16 network, requiring no system administrator. |
|
See http://www.zeroconf.org for further details, and "zcip.script" |
in the busybox examples. |
See http://www.zeroconf.org for further details, and "zcip.script" |
in the busybox examples. |
|
source udhcp/Config.in |
|
@@ -1198,8 +1134,8 @@ |
default BUSYBOX_DEFAULT_IFUPDOWN_UDHCPC_CMD_OPTIONS |
depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN |
help |
Command line options to pass to udhcpc from ifup. |
Intended to alter options not available in /etc/network/interfaces. |
(IE: --syslog --background etc...) |
Command line options to pass to udhcpc from ifup. |
Intended to alter options not available in /etc/network/interfaces. |
(IE: --syslog --background etc...) |
|
endmenu |