/branches/18.06.1/package/kernel/mac80211/Makefile |
@@ -10,10 +10,10 @@ |
|
PKG_NAME:=mac80211 |
|
PKG_VERSION:=4.19.23-1 |
PKG_RELEASE:=4 |
PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v4.19.23/ |
PKG_HASH:=703e940b542eb56067fcd847a7c69398dcc9829f34472647eea4211cb2ab3b83 |
PKG_VERSION:=2017-11-01 |
PKG_RELEASE:=9 |
PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources |
PKG_HASH:=8437ab7886b988c8152e7a4db30b7f41009e49a3b2cb863edd05da1ecd7eb05a |
|
PKG_SOURCE:=backports-$(PKG_VERSION).tar.xz |
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/backports-$(PKG_VERSION) |
@@ -24,23 +24,58 @@ |
PKG_DRIVERS = \ |
adm8211 \ |
airo \ |
ath ath5k ath6kl ath6kl-sdio ath6kl-usb ath9k ath9k-common ath9k-htc ath10k \ |
b43 b43legacy \ |
carl9170 \ |
hermes hermes-pci hermes-pcmcia hermes-plx\ |
iwl-legacy iwl3945 iwl4965 iwlwifi \ |
lib80211 \ |
libipw ipw2100 ipw2200 \ |
libertas-sdio libertas-usb libertas-spi \ |
mac80211-hwsim \ |
mt7601u \ |
mwl8k mwifiex-pcie mwifiex-sdio \ |
p54-common p54-pci p54-spi p54-usb \ |
rsi91x rsi91x-usb rsi91x-sdio\ |
rt2x00-lib rt2x00-pci rt2x00-usb \ |
rt2400-pci rt2500-pci rt2500-usb \ |
rt2800-lib rt2800-mmio rt2800-pci rt2800-soc rt2800-usb \ |
rt61-pci rt73-usb \ |
rtl8180 rtl8187 \ |
rtlwifi rtlwifi-pci rtlwifi-btcoexist rtlwifi-usb rtl8192c-common \ |
rtl8192ce rtl8192se rtl8192de rtl8192cu rtl8821ae \ |
rtl8xxxu \ |
wlcore wl12xx wl18xx \ |
zd1211rw |
|
PKG_CONFIG_DEPENDS:= \ |
CONFIG_PACKAGE_kmod-mac80211 \ |
$(patsubst %,CONFIG_PACKAGE_kmod-%,$(PKG_DRIVERS)) \ |
CONFIG_PACKAGE_MAC80211_DEBUGFS \ |
CONFIG_PACKAGE_MAC80211_MESH \ |
CONFIG_PACKAGE_MAC80211_TRACING \ |
CONFIG_PACKAGE_ATH_DEBUG \ |
CONFIG_PACKAGE_ATH_DFS \ |
CONFIG_PACKAGE_ATH_SPECTRAL \ |
CONFIG_PACKAGE_ATH_DYNACK \ |
CONFIG_PACKAGE_B43_DEBUG \ |
CONFIG_PACKAGE_B43_PIO \ |
CONFIG_PACKAGE_B43_PHY_G \ |
CONFIG_PACKAGE_B43_PHY_N \ |
CONFIG_PACKAGE_B43_PHY_LP \ |
CONFIG_PACKAGE_B43_PHY_HT \ |
CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB \ |
CONFIG_PACKAGE_B43_BUSES_BCMA \ |
CONFIG_PACKAGE_B43_BUSES_SSB \ |
CONFIG_PACKAGE_BRCM80211_DEBUG \ |
CONFIG_PACKAGE_IWLWIFI_DEBUG \ |
CONFIG_PACKAGE_IWLWIFI_DEBUGFS \ |
CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS \ |
CONFIG_PACKAGE_RT2X00_DEBUG \ |
CONFIG_PACKAGE_RTLWIFI_DEBUG \ |
CONFIG_ATH9K_SUPPORT_PCOEM \ |
CONFIG_ATH9K_TX99 \ |
CONFIG_ATH_USER_REGD \ |
|
include $(INCLUDE_DIR)/package.mk |
|
@@ -52,53 +87,10 @@ |
MAINTAINER:=Felix Fietkau <nbd@nbd.name> |
endef |
|
config_package=$(if $(CONFIG_PACKAGE_kmod-$(1)),m) |
|
config-y:= \ |
WLAN \ |
NL80211_TESTMODE \ |
CFG80211_WEXT \ |
CFG80211_CERTIFICATION_ONUS \ |
MAC80211_RC_MINSTREL \ |
MAC80211_RC_MINSTREL_HT \ |
MAC80211_RC_MINSTREL_VHT \ |
MAC80211_RC_DEFAULT_MINSTREL \ |
WLAN_VENDOR_ADMTEK \ |
WLAN_VENDOR_ATH \ |
WLAN_VENDOR_ATMEL \ |
WLAN_VENDOR_BROADCOM \ |
WLAN_VENDOR_CISCO \ |
WLAN_VENDOR_INTEL \ |
WLAN_VENDOR_INTERSIL \ |
WLAN_VENDOR_MARVELL \ |
WLAN_VENDOR_MEDIATEK \ |
WLAN_VENDOR_RALINK \ |
WLAN_VENDOR_REALTEK \ |
WLAN_VENDOR_RSI \ |
WLAN_VENDOR_ST \ |
WLAN_VENDOR_TI \ |
WLAN_VENDOR_ZYDAS \ |
|
config-$(call config_package,cfg80211) += CFG80211 |
|
config-$(call config_package,mac80211) += MAC80211 |
config-$(CONFIG_PACKAGE_MAC80211_MESH) += MAC80211_MESH |
|
include ath.mk |
include broadcom.mk |
include intel.mk |
include marvell.mk |
include ralink.mk |
include realtek.mk |
|
PKG_CONFIG_DEPENDS += \ |
$(patsubst %,CONFIG_PACKAGE_kmod-%,$(PKG_DRIVERS)) |
|
define KernelPackage/cfg80211 |
$(call KernelPackage/mac80211/Default) |
TITLE:=cfg80211 - wireless configuration API |
DEPENDS+= +iw +wireless-regdb |
ABI_VERSION:=$(PKG_VERSION)-$(PKG_RELEASE) |
FILES:= \ |
$(PKG_BUILD_DIR)/compat/compat.ko \ |
$(PKG_BUILD_DIR)/net/wireless/cfg80211.ko |
@@ -116,7 +108,6 @@ |
KCONFIG:=\ |
CONFIG_AVERAGE=y |
FILES:= $(PKG_BUILD_DIR)/net/mac80211/mac80211.ko |
ABI_VERSION:=$(PKG_VERSION)-$(PKG_RELEASE) |
MENU:=1 |
endef |
|
@@ -171,6 +162,645 @@ |
Kernel support for Cisco Aironet cards |
endef |
|
define KernelPackage/ath/config |
if PACKAGE_kmod-ath |
config ATH_USER_REGD |
bool "Force Atheros drivers to respect the user's regdomain settings" |
default y |
help |
Atheros' idea of regulatory handling is that the EEPROM of the card defines |
the regulatory limits and the user is only allowed to restrict the settings |
even further, even if the country allows frequencies or power levels that |
are forbidden by the EEPROM settings. |
|
Select this option if you want the driver to respect the user's decision about |
regulatory settings. |
|
config PACKAGE_ATH_DEBUG |
bool "Atheros wireless debugging" |
help |
Say Y, if you want to debug atheros wireless drivers. |
Only ath9k & ath10k make use of this. |
|
config PACKAGE_ATH_DFS |
bool "Enable DFS support" |
default y |
help |
Dynamic frequency selection (DFS) is required for most of the 5 GHz band |
channels in Europe, US, and Japan. |
|
Select this option if you want to use such channels. |
|
config PACKAGE_ATH_SPECTRAL |
bool "Atheros spectral scan support" |
depends on PACKAGE_ATH_DEBUG |
select KERNEL_RELAY |
help |
Say Y to enable access to the FFT/spectral data via debugfs. |
|
config PACKAGE_ATH_DYNACK |
bool "Enable Dynack support" |
depends on PACKAGE_kmod-ath9k-common |
help |
Enables support for Dynamic ACK estimation, which allows the fastest possible speed |
at any distance automatically by increasing/decreasing the max frame ACK time for |
the most remote station detected. It can be enabled by using iw (iw phy0 set distance auto), |
or by sending the NL80211_ATTR_WIPHY_DYN_ACK flag to mac80211 driver using netlink. |
|
Select this option if you want to enable this feature |
|
endif |
endef |
|
define KernelPackage/ath |
$(call KernelPackage/mac80211/Default) |
TITLE:=Atheros common driver part |
DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx||TARGET_ath25 +kmod-mac80211 |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.ko |
MENU:=1 |
endef |
|
define KernelPackage/ath/description |
This module contains some common parts needed by Atheros Wireless drivers. |
endef |
|
define KernelPackage/ath5k |
$(call KernelPackage/mac80211/Default) |
TITLE:=Atheros 5xxx wireless cards support |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath5k |
DEPENDS+= @PCI_SUPPORT||@TARGET_ath25 +kmod-ath +@DRIVER_11W_SUPPORT |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.ko |
AUTOLOAD:=$(call AutoProbe,ath5k) |
endef |
|
define KernelPackage/ath5k/description |
This module adds support for wireless adapters based on |
Atheros 5xxx chipset. |
endef |
|
define KernelPackage/ath6kl |
$(call KernelPackage/mac80211/Default) |
TITLE:=Atheros FullMAC wireless devices (common code for ath6kl_sdio and ath6kl_usb) |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath6kl |
HIDDEN:=1 |
DEPENDS+= +kmod-ath +@DRIVER_11N_SUPPORT |
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath6kl/ath6kl_core.ko |
endef |
|
define KernelPackage/ath6kl-sdio |
$(call KernelPackage/mac80211/Default) |
TITLE:=Atheros 802.11n SDIO wireless cards support |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath6kl |
DEPENDS+= +kmod-mmc +kmod-ath6kl |
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath6kl/ath6kl_sdio.ko |
AUTOLOAD:=$(call AutoProbe,ath6kl_sdio) |
endef |
|
define KernelPackage/ath6kl-sdio/description |
This module adds support for wireless adapters based on |
Atheros IEEE 802.11n AR6003 and AR6004 family of chipsets. |
endef |
|
define KernelPackage/ath6kl-usb |
$(call KernelPackage/mac80211/Default) |
TITLE:=Atheros 802.11n USB wireless cards support |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath6kl |
DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-ath6kl |
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath6kl/ath6kl_usb.ko |
AUTOLOAD:=$(call AutoProbe,ath6kl_usb) |
endef |
|
define KernelPackage/ath6kl-usb/description |
This module adds support for wireless adapters based on the |
Atheros IEEE 802.11n AR6004 chipset. |
endef |
|
define KernelPackage/ath9k-common |
$(call KernelPackage/mac80211/Default) |
TITLE:=Atheros 802.11n wireless devices (common code for ath9k and ath9k_htc) |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k |
HIDDEN:=1 |
DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT |
FILES:= \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_common.ko \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.ko |
endef |
|
define KernelPackage/ath9k |
$(call KernelPackage/mac80211/Default) |
TITLE:=Atheros 802.11n PCI wireless cards support |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k |
DEPENDS+= @PCI_SUPPORT||TARGET_ar71xx +kmod-ath9k-common |
FILES:= \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.ko |
AUTOLOAD:=$(call AutoProbe,ath9k) |
endef |
|
define KernelPackage/ath9k/description |
This module adds support for wireless adapters based on |
Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets. |
endef |
|
define KernelPackage/ath9k/config |
|
config ATH9K_SUPPORT_PCOEM |
bool "Support chips used in PC OEM cards" |
depends on PACKAGE_kmod-ath9k |
|
config ATH9K_TX99 |
bool "Enable TX99 support (WARNING: testing only, breaks normal operation!)" |
depends on PACKAGE_kmod-ath9k |
|
config ATH9K_UBNTHSR |
bool "Support for Ubiquiti UniFi Outdoor+ access point" |
depends on PACKAGE_kmod-ath9k && TARGET_ar71xx_generic |
default y |
|
endef |
|
define KernelPackage/ath9k-htc |
$(call KernelPackage/mac80211/Default) |
TITLE:=Atheros 802.11n USB device support |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k |
DEPENDS+= @USB_SUPPORT +kmod-ath9k-common +kmod-usb-core +ath9k-htc-firmware |
FILES:= \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_htc.ko |
AUTOLOAD:=$(call AutoProbe,ath9k_htc) |
endef |
|
define KernelPackage/ath9k-htc/description |
This module adds support for wireless adapters based on |
Atheros USB AR9271 and AR7010 family of chipsets. |
endef |
|
define KernelPackage/ath10k |
$(call KernelPackage/mac80211/Default) |
TITLE:=Atheros 802.11ac wireless cards support |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath10k |
DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +@DRIVER_11W_SUPPORT |
FILES:= \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko |
AUTOLOAD:=$(call AutoProbe,ath10k_pci) |
endef |
|
define KernelPackage/ath10k/description |
This module adds support for wireless adapters based on |
Atheros IEEE 802.11ac family of chipsets. For now only |
PCI is supported. |
endef |
|
#Broadcom firmware |
ifneq ($(CONFIG_B43_FW_6_30),) |
PKG_B43_FWV4_NAME:=broadcom-wl |
PKG_B43_FWV4_VERSION:=6.30.163.46 |
PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).wl_apsta.o |
PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 |
PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ |
PKG_B43_FWV4_HASH:=a07c3b6b277833c7dbe61daa511f908cd66c5e2763eb7a0859abc36cd9335c2d |
else |
ifneq ($(CONFIG_B43_FW_5_10),) |
PKG_B43_FWV4_NAME:=broadcom-wl |
PKG_B43_FWV4_VERSION:=5.10.56.27.3 |
PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta/wl_prebuilt.o |
PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)_mipsel.tar.bz2 |
PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ |
PKG_B43_FWV4_HASH:=26a8c370f48fc129d0731cfd751c36cae1419b0bc8ca35781126744e60eae009 |
else |
ifneq ($(CONFIG_B43_FW_4_178),) |
PKG_B43_FWV4_NAME:=broadcom-wl |
PKG_B43_FWV4_VERSION:=4.178.10.4 |
PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o |
PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 |
PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ |
PKG_B43_FWV4_HASH:=32f6ad98facbb9045646fdc8b54bb03086d204153253f9c65d0234a5d90ae53f |
else |
ifneq ($(CONFIG_B43_FW_5_100_138),) |
PKG_B43_FWV4_NAME:=broadcom-wl |
PKG_B43_FWV4_VERSION:=5.100.138 |
PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o |
PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 |
PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ |
PKG_B43_FWV4_HASH:=f1e7067aac5b62b67b8b6e4c517990277804339ac16065eb13c731ff909ae46f |
else |
PKG_B43_FWV4_NAME:=broadcom-wl |
PKG_B43_FWV4_VERSION:=4.150.10.5 |
PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta_mimo.o |
PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 |
PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ |
PKG_B43_FWV4_HASH:=a9f4e276a4d8d3a1cd0f2eb87080ae89b77f0a7140f06d4e9e2135fc44fdd533 |
endif |
endif |
endif |
endif |
ifneq ($(CONFIG_B43_OPENFIRMWARE),) |
PKG_B43_FWV4_NAME:=broadcom-wl |
PKG_B43_FWV4_VERSION:=5.2 |
PKG_B43_FWV4_OBJECT:=openfwwf-$(PKG_B43_FWV4_VERSION) |
PKG_B43_FWV4_SOURCE:=openfwwf-$(PKG_B43_FWV4_VERSION).tar.gz |
PKG_B43_FWV4_SOURCE_URL:=http://netweb.ing.unibs.it/~openfwwf/firmware |
PKG_B43_FWV4_HASH:=9de03320083201080b2e94b81637ac07a159cf4e6f3481383e1a217e627bc0dc |
endif |
|
|
define Download/b43 |
FILE:=$(PKG_B43_FWV4_SOURCE) |
URL:=$(PKG_B43_FWV4_SOURCE_URL) |
HASH:=$(PKG_B43_FWV4_HASH) |
endef |
$(eval $(call Download,b43)) |
|
define KernelPackage/b43 |
$(call KernelPackage/mac80211/Default) |
TITLE:=Broadcom 43xx wireless support |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43 |
KCONFIG:= \ |
CONFIG_HW_RANDOM=y |
# Depend on PCI_SUPPORT to make sure we can select kmod-bcma or kmod-ssb |
DEPENDS += \ |
@PCI_SUPPORT +kmod-mac80211 \ |
$(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \ |
$(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma) |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43/b43.ko |
AUTOLOAD:=$(call AutoProbe,b43) |
MENU:=1 |
endef |
|
define KernelPackage/b43/config |
|
config PACKAGE_B43_USE_SSB |
select PACKAGE_kmod-ssb |
tristate |
depends on !TARGET_brcm47xx && !TARGET_brcm63xx |
default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB |
default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB |
|
config PACKAGE_B43_USE_BCMA |
select PACKAGE_kmod-bcma |
tristate |
depends on !TARGET_brcm47xx && !TARGET_bcm53xx |
default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB |
default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA |
|
if PACKAGE_kmod-b43 |
|
choice |
prompt "b43 firmware version" |
default B43_FW_5_100_138 |
help |
This option allows you to select the version of the b43 firmware. |
|
config B43_FW_4_150 |
bool "Firmware 410.2160 from driver 4.150.10.5 (old stable)" |
help |
Old stable firmware for BCM43xx devices. |
|
If unsure, select this. |
|
config B43_FW_4_178 |
bool "Firmware 478.104 from driver 4.178.10.4" |
help |
Older firmware for BCM43xx devices. |
|
If unsure, select the "stable" firmware. |
|
config B43_FW_5_10 |
bool "Firmware 508.1084 from driver 5.10.56.27" |
help |
Older firmware for BCM43xx devices. |
|
If unsure, select the "stable" firmware. |
|
config B43_FW_5_100_138 |
bool "Firmware 666.2 from driver 5.100.138 (stable)" |
help |
The currently default firmware for BCM43xx devices. |
|
This firmware currently gets most of the testing and is needed for some N-PHY devices. |
|
If unsure, select the this firmware. |
|
config B43_FW_6_30 |
bool "Firmware 784.2 from driver 6.30.163.46 (experimental)" |
help |
Newer experimental firmware for BCM43xx devices. |
|
This firmware is mostly untested. |
|
If unsure, select the "stable" firmware. |
|
config B43_OPENFIRMWARE |
bool "Open FirmWare for WiFi networks" |
help |
Opensource firmware for BCM43xx devices. |
|
Do _not_ select this, unless you know what you are doing. |
The Opensource firmware is not suitable for embedded devices, yet. |
It does not support QoS, which is bad for AccessPoints. |
It does not support hardware crypto acceleration, which is a showstopper |
for embedded devices with low CPU resources. |
|
If unsure, select the "stable" firmware. |
|
endchoice |
|
config B43_FW_SQUASH |
bool "Remove unnecessary firmware files" |
depends on !B43_OPENFIRMWARE |
default y |
help |
This options allows you to remove unnecessary b43 firmware files |
from the final rootfs image. This can reduce the rootfs size by |
up to 200k. |
|
If unsure, say Y. |
|
config B43_FW_SQUASH_COREREVS |
string "Core revisions to include" |
depends on B43_FW_SQUASH |
default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy |
default "16,28,29,30" if TARGET_brcm47xx_mips74k |
default "5,6,7,8,9,10,11,13,15,16,28,29,30" |
help |
This is a comma seperated list of core revision numbers. |
|
Example (keep files for rev5 only): |
5 |
|
Example (keep files for rev5 and rev11): |
5,11 |
|
config B43_FW_SQUASH_PHYTYPES |
string "PHY types to include" |
depends on B43_FW_SQUASH |
default "G,N,LP" if TARGET_brcm47xx_legacy |
default "N,HT" if TARGET_brcm47xx_mips74k |
default "G,N,LP,HT" |
help |
This is a comma seperated list of PHY types: |
A => A-PHY |
AG => Dual A-PHY G-PHY |
G => G-PHY |
LP => LP-PHY |
N => N-PHY |
HT => HT-PHY |
LCN => LCN-PHY |
LCN40 => LCN40-PHY |
AC => AC-PHY |
|
Example (keep files for G-PHY only): |
G |
|
Example (keep files for G-PHY and N-PHY): |
G,N |
|
choice |
prompt "Supported buses" |
default PACKAGE_B43_BUSES_BCMA_AND_SSB |
help |
This allows choosing buses that b43 should support. |
|
config PACKAGE_B43_BUSES_BCMA_AND_SSB |
depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx |
bool "BCMA and SSB" |
|
config PACKAGE_B43_BUSES_BCMA |
depends on !TARGET_brcm47xx_legacy |
bool "BCMA only" |
|
config PACKAGE_B43_BUSES_SSB |
depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx |
bool "SSB only" |
|
endchoice |
|
config PACKAGE_B43_DEBUG |
bool "Enable debug output and debugfs for b43" |
default n |
help |
Enable additional debug output and runtime sanity checks for b43 |
and enables the debugfs interface. |
|
If unsure, say N. |
|
config PACKAGE_B43_PIO |
bool "Enable support for PIO transfer mode" |
default n |
help |
Enable support for using PIO instead of DMA. Unless you have DMA |
transfer problems you don't need this. |
|
If unsure, say N. |
|
config PACKAGE_B43_PHY_G |
bool "Enable support for G-PHYs" |
default n if TARGET_brcm47xx_mips74k |
default y |
help |
Enable support for G-PHY. This includes support for the following devices: |
PCI: BCM4306, BCM4311, BCM4318 |
SoC: BCM5352E, BCM4712 |
|
If unsure, say Y. |
|
config PACKAGE_B43_PHY_N |
bool "Enable support for N-PHYs" |
default y |
help |
Enable support for N-PHY. This includes support for the following devices: |
PCI: BCM4321, BCM4322, BCM43222, BCM43224, BCM43225 |
SoC: BCM4716, BCM4717, BCM4718 |
|
Currently only 11g speed is available. |
|
If unsure, say Y. |
|
config PACKAGE_B43_PHY_LP |
bool "Enable support for LP-PHYs" |
default n if TARGET_brcm47xx_mips74k |
default y |
help |
Enable support for LP-PHY. This includes support for the following devices: |
PCI: BCM4312 |
SoC: BCM5354 |
|
If unsure, say Y. |
|
config PACKAGE_B43_PHY_HT |
bool "Enable support for HT-PHYs" |
default n if TARGET_brcm47xx_legacy |
default y |
help |
Enable support for HT-PHY. This includes support for the following devices: |
PCI: BCM4331 |
|
Currently only 11g speed is available. |
|
If unsure, say Y. |
|
config PACKAGE_B43_PHY_LCN |
bool "Enable support for LCN-PHYs" |
depends on BROKEN |
default n |
help |
Currently broken. |
|
If unsure, say N. |
|
endif |
endef |
|
define KernelPackage/b43/description |
Kernel module for Broadcom 43xx wireless support (mac80211 stack) new |
endef |
|
define KernelPackage/b43legacy |
$(call KernelPackage/mac80211/Default) |
TITLE:=Broadcom 43xx-legacy wireless support |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43 |
KCONFIG:= \ |
CONFIG_HW_RANDOM=y |
DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb +b43legacy-firmware |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43legacy/b43legacy.ko |
AUTOLOAD:=$(call AutoProbe,b43legacy) |
MENU:=1 |
endef |
|
define KernelPackage/b43legacy/description |
Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new |
endef |
|
|
define KernelPackage/brcmutil |
$(call KernelPackage/mac80211/Default) |
TITLE:=Broadcom IEEE802.11n common driver parts |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 |
DEPENDS+=@PCI_SUPPORT||USB_SUPPORT |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmutil/brcmutil.ko |
AUTOLOAD:=$(call AutoProbe,brcmutil) |
MENU:=1 |
endef |
|
define KernelPackage/brcmutil/description |
This module contains some common parts needed by Broadcom Wireless drivers brcmsmac and brcmfmac. |
endef |
|
define KernelPackage/brcmutil/config |
if PACKAGE_kmod-brcmutil |
|
config PACKAGE_BRCM80211_DEBUG |
bool "Broadcom wireless driver debugging" |
help |
Say Y, if you want to debug brcmsmac and brcmfmac wireless driver. |
|
endif |
endef |
|
PKG_BRCMSMAC_FW_NAME:=broadcom-wl |
PKG_BRCMSMAC_FW_VERSION:=5.100.138 |
PKG_BRCMSMAC_FW_OBJECT:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION)/linux/wl_apsta.o |
PKG_BRCMSMAC_FW_SOURCE:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION).tar.bz2 |
PKG_BRCMSMAC_FW_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ |
PKG_BRCMSMAC_FW_HASH:=f1e7067aac5b62b67b8b6e4c517990277804339ac16065eb13c731ff909ae46f |
|
define Download/brcmsmac |
FILE:=$(PKG_BRCMSMAC_FW_SOURCE) |
URL:=$(PKG_BRCMSMAC_FW_SOURCE_URL) |
HASH:=$(PKG_BRCMSMAC_FW_HASH) |
endef |
$(eval $(call Download,brcmsmac)) |
|
define KernelPackage/brcmsmac |
$(call KernelPackage/mac80211/Default) |
TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 |
DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko |
AUTOLOAD:=$(call AutoProbe,brcmsmac) |
MENU:=1 |
endef |
|
define KernelPackage/brcmsmac/description |
Kernel module for Broadcom IEEE802.11n PCIe Wireless cards |
endef |
|
define KernelPackage/brcmsmac/config |
if PACKAGE_kmod-brcmsmac |
|
config BRCMSMAC_USE_FW_FROM_WL |
bool "Use firmware extracted from broadcom proprietary driver" |
default y |
help |
Instead of using the official brcmsmac firmware a firmware |
version 666.2 extracted from the proprietary Broadcom driver |
is used. This is needed to get core rev 17 used in bcm4716 |
to work. |
|
If unsure, say Y. |
|
endif |
endef |
|
|
define KernelPackage/brcmfmac |
$(call KernelPackage/mac80211/Default) |
TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 |
DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +kmod-brcmutil \ |
+BRCMFMAC_SDIO:kmod-mmc @!TARGET_uml \ |
+BRCMFMAC_USB:kmod-usb-core +BRCMFMAC_USB:brcmfmac-firmware-usb |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko |
AUTOLOAD:=$(call AutoProbe,brcmfmac) |
endef |
|
define KernelPackage/brcmfmac/description |
Kernel module for Broadcom IEEE802.11n USB Wireless cards |
endef |
|
define KernelPackage/brcmfmac/config |
if PACKAGE_kmod-brcmfmac |
|
config BRCMFMAC_SDIO |
bool "Enable SDIO bus interface support" |
default y if TARGET_brcm2708 |
default y if TARGET_sunxi |
default n |
help |
Enable support for cards attached to an SDIO bus. |
Select this option only if you are sure that your |
board has a Broadcom wireless chip atacched to |
that bus. |
|
config BRCMFMAC_USB |
bool "Enable USB bus interface support" |
depends on USB_SUPPORT |
default y |
help |
Supported USB connected chipsets: |
BCM43235, BCM43236, BCM43238 (all in revision 3 only) |
BCM43143, BCM43242, BCM43566, BCM43569 |
|
config BRCMFMAC_PCIE |
bool "Enable PCIE bus interface support" |
depends on PCI_SUPPORT |
default y |
help |
Supported PCIe connected chipsets: |
BCM4354, BCM4356, BCM43567, BCM43570, BCM43602 |
|
endif |
endef |
|
|
define KernelPackage/carl9170 |
$(call KernelPackage/mac80211/Default) |
TITLE:=Driver for Atheros AR9170 USB sticks |
DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core +kmod-input-core +@DRIVER_11N_SUPPORT +carl9170-firmware |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170/carl9170.ko |
AUTOLOAD:=$(call AutoProbe,carl9170) |
endef |
|
|
define KernelPackage/hermes |
$(call KernelPackage/mac80211/Default) |
TITLE:=Hermes 802.11b chipset support |
@@ -210,7 +840,7 @@ |
define KernelPackage/hermes-pcmcia |
$(call KernelPackage/mac80211/Default) |
TITLE:=Hermes based PCMCIA adaptors |
DEPENDS:=@PCMCIA_SUPPORT +kmod-hermes +kmod-pcmcia-core |
DEPENDS:=@PCMCIA_SUPPORT +kmod-hermes @BROKEN |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco_cs.ko |
AUTOLOAD:=$(call AutoProbe,orinoco_cs) |
endef |
@@ -220,6 +850,114 @@ |
endef |
|
|
define KernelPackage/iwlwifi |
$(call KernelPackage/mac80211/Default) |
DEPENDS:= +kmod-mac80211 @PCI_SUPPORT +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT @!LINUX_3_18 |
TITLE:=Intel AGN Wireless support |
FILES:= \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/dvm/iwldvm.ko \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/mvm/iwlmvm.ko |
AUTOLOAD:=$(call AutoProbe,iwlwifi iwldvm iwlmvm) |
MENU:=1 |
endef |
|
define KernelPackage/iwlwifi/description |
iwlwifi kernel module for |
Intel Wireless WiFi Link 6250AGN Adapter |
Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN) |
Intel WiFi Link 1000BGN |
Intel Wireless WiFi 5150AGN |
Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN |
Intel 6005 Series Wi-Fi Adapters |
Intel 6030 Series Wi-Fi Adapters |
Intel Wireless WiFi Link 6150BGN 2 Adapter |
Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN) |
Intel 2000 Series Wi-Fi Adapters |
Intel 7260 Wi-Fi Adapter |
Intel 3160 Wi-Fi Adapter |
Intel 7265 Wi-Fi Adapter |
Intel 8260 Wi-Fi Adapter |
Intel 3165 Wi-Fi Adapter |
endef |
|
define KernelPackage/iwlwifi/config |
if PACKAGE_kmod-iwlwifi |
|
config PACKAGE_IWLWIFI_DEBUG |
bool "Enable full debugging output in the iwlwifi driver" |
default n |
help |
This option will enable debug tracing output for the iwlwifi drivers |
|
This will result in the kernel module being ~100k larger. You can |
control which debug output is sent to the kernel log by setting the |
value in |
|
/sys/module/iwlwifi/parameters/debug |
|
This entry will only exist if this option is enabled. |
|
To set a value, simply echo an 8-byte hex value to the same file: |
|
% echo 0x43fff > /sys/module/iwlwifi/parameters/debug |
|
You can find the list of debug mask values in: |
drivers/net/wireless/intel/iwlwifi/iwl-debug.h |
|
If this is your first time using this driver, you should say Y here |
as the debug information can assist others in helping you resolve |
any problems you may encounter. |
|
config PACKAGE_IWLWIFI_DEBUGFS |
bool "iwlwifi debugfs support" |
depends on PACKAGE_MAC80211_DEBUGFS |
default n |
help |
Enable creation of debugfs files for the iwlwifi drivers. This |
is a low-impact option that allows getting insight into the |
driver's state at runtime. |
|
endif |
endef |
|
define KernelPackage/iwl-legacy |
$(call KernelPackage/mac80211/Default) |
DEPENDS:= +kmod-mac80211 @PCI_SUPPORT |
TITLE:=Intel legacy Wireless support |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwlegacy.ko |
AUTOLOAD:=$(call AutoProbe,iwlegacy) |
endef |
|
define KernelPackage/iwl-legacy/description |
iwl-legacy kernel module for legacy Intel wireless support |
endef |
|
define KernelPackage/iwl3945 |
$(call KernelPackage/mac80211/Default) |
DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +iwl3945-firmware |
TITLE:=Intel iwl3945 Wireless support |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwl3945.ko |
AUTOLOAD:=$(call AutoProbe,iwl3945) |
endef |
|
define KernelPackage/iwl3945/description |
iwl3945 kernel module for Intel 3945 support |
endef |
|
define KernelPackage/iwl4965 |
$(call KernelPackage/mac80211/Default) |
DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +@DRIVER_11N_SUPPORT +iwl4965-firmware |
TITLE:=Intel iwl4965 Wireless support |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwl4965.ko |
AUTOLOAD:=$(call AutoProbe,iwl4965) |
endef |
|
define KernelPackage/iwl4965/description |
iwl4965 kernel module for Intel 4965 support |
endef |
|
|
define KernelPackage/lib80211 |
$(call KernelPackage/mac80211/Default) |
TITLE:=802.11 Networking stack |
@@ -247,6 +985,109 @@ |
endef |
|
|
define KernelPackage/libipw |
$(call KernelPackage/mac80211/Default) |
TITLE:=libipw for ipw2100 and ipw2200 |
DEPENDS:=@PCI_SUPPORT +kmod-crypto-michael-mic +kmod-crypto-ecb +kmod-lib80211 +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT @!BIG_ENDIAN @!LINUX_3_18 |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/libipw.ko |
AUTOLOAD:=$(call AutoProbe,libipw) |
endef |
|
define KernelPackage/libipw/description |
Hardware independent IEEE 802.11 networking stack for ipw2100 and ipw2200. |
endef |
|
IPW2100_NAME:=ipw2100-fw |
IPW2100_VERSION:=1.3 |
|
define Download/ipw2100 |
URL:= \ |
https://src.fedoraproject.org/repo/pkgs/ipw2100-firmware/ipw2100-fw-1.3.tgz/46aa75bcda1a00efa841f9707bbbd113/ \ |
https://archlinux.mirror.pkern.at/other/packages/ipw2100-fw/ \ |
http://mirror.ox.ac.uk/sites/ftp.openbsd.org/pub/OpenBSD/distfiles/firmware/ \ |
http://firmware.openbsd.org/firmware-dist/ |
FILE:=$(IPW2100_NAME)-$(IPW2100_VERSION).tgz |
HASH:=e1107c455e48d324a616b47a622593bc8413dcce72026f72731c0b03dae3a7a2 |
endef |
$(eval $(call Download,ipw2100)) |
|
define KernelPackage/ipw2100 |
$(call KernelPackage/mac80211/Default) |
TITLE:=Intel IPW2100 driver |
DEPENDS:=@PCI_SUPPORT +kmod-libipw |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/ipw2100.ko |
AUTOLOAD:=$(call AutoProbe,ipw2100) |
endef |
|
define KernelPackage/ipw2100/description |
Kernel support for Intel IPW2100 |
Includes: |
- ipw2100 |
endef |
|
IPW2200_NAME:=ipw2200-fw |
IPW2200_VERSION:=3.1 |
|
define Download/ipw2200 |
URL:= \ |
https://src.fedoraproject.org/repo/pkgs/ipw2200-firmware/ipw2200-fw-3.1.tgz/eaba788643c7cc7483dd67ace70f6e99/ \ |
https://archlinux.mirror.pkern.at/other/packages/ipw2200-fw/ \ |
http://mirror.ox.ac.uk/sites/ftp.openbsd.org/pub/OpenBSD/distfiles/firmware/ \ |
http://firmware.openbsd.org/firmware-dist/ |
FILE:=$(IPW2200_NAME)-$(IPW2200_VERSION).tgz |
HASH:=c6818c11c18cc030d55ff83f64b2bad8feef485e7742f84f94a61d811a6258bd |
endef |
$(eval $(call Download,ipw2200)) |
|
define KernelPackage/ipw2200 |
$(call KernelPackage/mac80211/Default) |
TITLE:=Intel IPW2200 driver |
DEPENDS:=@PCI_SUPPORT +kmod-libipw |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/ipw2200.ko |
AUTOLOAD:=$(call AutoProbe,ipw2200) |
endef |
|
define KernelPackage/ipw2200/description |
Kernel support for Intel IPW2200 |
Includes: |
- ipw2200 |
endef |
|
|
define KernelPackage/libertas-usb |
$(call KernelPackage/mac80211/Default) |
DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 +@DRIVER_WEXT_SUPPORT +libertas-usb-firmware @!LINUX_3_18 |
TITLE:=Marvell 88W8015 Wireless Driver |
FILES:= \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/usb8xxx.ko |
AUTOLOAD:=$(call AutoProbe,libertas usb8xxx) |
endef |
|
define KernelPackage/libertas-sdio |
$(call KernelPackage/mac80211/Default) |
DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc +@DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-sdio-firmware @!LINUX_3_18 |
TITLE:=Marvell 88W8686 Wireless Driver |
FILES:= \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas_sdio.ko |
AUTOLOAD:=$(call AutoProbe,libertas libertas_sdio) |
endef |
|
define KernelPackage/libertas-spi |
$(call KernelPackage/mac80211/Default) |
SUBMENU:=Wireless Drivers |
DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +@DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-spi-firmware @!LINUX_3_18 |
KCONFIG := \ |
CONFIG_SPI=y \ |
CONFIG_SPI_MASTER=y |
TITLE:=Marvell 88W8686 SPI Wireless Driver |
FILES:= \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas_spi.ko |
AUTOLOAD:=$(call AutoProbe,libertas libertas_spi) |
endef |
|
define KernelPackage/mac80211-hwsim |
$(call KernelPackage/mac80211/Default) |
TITLE:=mac80211 HW simulation device |
@@ -264,6 +1105,51 @@ |
AUTOLOAD:=$(call AutoProbe,mt7601u) |
endef |
|
|
define KernelPackage/mwl8k |
$(call KernelPackage/mac80211/Default) |
TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/mwl8k |
DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +mwl8k-firmware |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwl8k.ko |
AUTOLOAD:=$(call AutoProbe,mwl8k) |
endef |
|
define KernelPackage/mwl8k/description |
Kernel modules for Marvell TOPDOG 802.11 Wireless cards |
endef |
|
|
define KernelPackage/mwifiex-pcie |
$(call KernelPackage/mac80211/Default) |
TITLE:=Driver for Marvell 802.11n/802.11ac PCIe Wireless cards |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/mwifiex |
DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +mwifiex-pcie-firmware |
FILES:= \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex.ko \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex_pcie.ko |
AUTOLOAD:=$(call AutoProbe,mwifiex_pcie) |
endef |
|
define KernelPackage/mwifiex-pcie/description |
Kernel modules for Marvell 802.11n/802.11ac PCIe Wireless cards |
endef |
|
define KernelPackage/mwifiex-sdio |
$(call KernelPackage/mac80211/Default) |
TITLE:=Driver for Marvell 802.11n/802.11ac SDIO Wireless cards |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/mwifiex |
DEPENDS+= +kmod-mmc +kmod-mac80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +mwifiex-sdio-firmware |
FILES:= \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex.ko \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex_sdio.ko |
AUTOLOAD:=$(call AutoProbe,mwifiex_sdio) |
endef |
|
define KernelPackage/mwifiex-sdio/description |
Kernel modules for Marvell 802.11n/802.11ac SDIO Wireless cards |
endef |
|
define KernelPackage/p54/Default |
$(call KernelPackage/mac80211/Default) |
TITLE:=Prism54 Drivers |
@@ -328,6 +1214,297 @@ |
endef |
|
|
|
define KernelPackage/rt2x00/Default |
$(call KernelPackage/mac80211/Default) |
TITLE:=Ralink Drivers for RT2x00 cards |
endef |
|
define KernelPackage/rt2x00-lib |
$(call KernelPackage/rt2x00/Default) |
DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-mac80211 +kmod-lib-crc-itu-t |
TITLE+= (LIB) |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00lib.ko |
MENU:=1 |
endef |
|
define KernelPackage/rt2x00-lib/config |
if PACKAGE_kmod-rt2x00-lib |
|
config PACKAGE_RT2X00_LIB_DEBUGFS |
bool "Enable rt2x00 debugfs support" |
depends on PACKAGE_MAC80211_DEBUGFS |
help |
Enable creation of debugfs files for the rt2x00 drivers. |
These debugfs files support both reading and writing of the |
most important register types of the rt2x00 hardware. |
|
config PACKAGE_RT2X00_DEBUG |
bool "Enable rt2x00 debug output" |
help |
Enable debugging output for all rt2x00 modules |
|
endif |
endef |
|
define KernelPackage/rt2x00-mmio |
$(call KernelPackage/rt2x00/Default) |
DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-eeprom-93cx6 |
HIDDEN:=1 |
TITLE+= (MMIO) |
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.ko |
endef |
|
define KernelPackage/rt2x00-pci |
$(call KernelPackage/rt2x00/Default) |
DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-mmio +kmod-rt2x00-lib |
HIDDEN:=1 |
TITLE+= (PCI) |
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00pci.ko |
AUTOLOAD:=$(call AutoProbe,rt2x00pci) |
endef |
|
define KernelPackage/rt2x00-usb |
$(call KernelPackage/rt2x00/Default) |
DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core |
HIDDEN:=1 |
TITLE+= (USB) |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00usb.ko |
AUTOLOAD:=$(call AutoProbe,rt2x00usb) |
endef |
|
define KernelPackage/rt2800-lib |
$(call KernelPackage/rt2x00/Default) |
DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-lib-crc-ccitt +@DRIVER_11N_SUPPORT |
HIDDEN:=1 |
TITLE+= (rt2800 LIB) |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800lib.ko |
endef |
|
define KernelPackage/rt2400-pci |
$(call KernelPackage/rt2x00/Default) |
DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci |
TITLE+= (RT2400 PCI) |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2400pci.ko |
AUTOLOAD:=$(call AutoProbe,rt2400pci) |
endef |
|
define KernelPackage/rt2500-pci |
$(call KernelPackage/rt2x00/Default) |
DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci |
TITLE+= (RT2500 PCI) |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500pci.ko |
AUTOLOAD:=$(call AutoProbe,rt2500pci) |
endef |
|
define KernelPackage/rt2500-usb |
$(call KernelPackage/rt2x00/Default) |
DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb |
TITLE+= (RT2500 USB) |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500usb.ko |
AUTOLOAD:=$(call AutoProbe,rt2500usb) |
endef |
|
define KernelPackage/rt2800-mmio |
$(call KernelPackage/rt2x00/Default) |
TITLE += (RT28xx/RT3xxx MMIO) |
DEPENDS += +kmod-rt2800-lib +kmod-rt2x00-mmio |
HIDDEN:=1 |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800mmio.ko |
endef |
|
define KernelPackage/rt2800-soc |
$(call KernelPackage/rt2x00/Default) |
DEPENDS += @(TARGET_ramips_rt288x||TARGET_ramips_rt305x||TARGET_ramips_rt3883||TARGET_ramips_mt7620) +kmod-rt2800-mmio +kmod-rt2800-lib |
TITLE += (RT28xx/RT3xxx SoC) |
FILES := \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00soc.ko \ |
$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800soc.ko |
AUTOLOAD:=$(call AutoProbe,rt2800soc) |
endef |
|
define KernelPackage/rt2800-pci |
$(call KernelPackage/rt2x00/Default) |
DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-rt2800-lib +kmod-rt2800-mmio +rt2800-pci-firmware |
TITLE+= (RT2860 PCI) |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800pci.ko |
AUTOLOAD:=$(call AutoProbe,rt2800pci) |
endef |
|
define KernelPackage/rt2800-usb |
$(call KernelPackage/rt2x00/Default) |
DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-rt2800-lib +kmod-lib-crc-ccitt +rt2800-usb-firmware |
TITLE+= (RT2870 USB) |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800usb.ko |
AUTOLOAD:=$(call AutoProbe,rt2800usb) |
endef |
|
|
define KernelPackage/rt61-pci |
$(call KernelPackage/rt2x00/Default) |
DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +rt61-pci-firmware |
TITLE+= (RT2x61 PCI) |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt61pci.ko |
AUTOLOAD:=$(call AutoProbe,rt61pci) |
endef |
|
define KernelPackage/rt73-usb |
$(call KernelPackage/rt2x00/Default) |
DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +rt73-usb-firmware |
TITLE+= (RT73 USB) |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt73usb.ko |
AUTOLOAD:=$(call AutoProbe,rt73usb) |
endef |
|
|
define KernelPackage/rtl818x/Default |
$(call KernelPackage/mac80211/Default) |
TITLE:=Realtek Drivers for RTL818x devices |
URL:=https://wireless.wiki.kernel.org/en/users/drivers/rtl8187 |
DEPENDS+= +kmod-eeprom-93cx6 +kmod-mac80211 |
endef |
|
define KernelPackage/rtl8180 |
$(call KernelPackage/rtl818x/Default) |
DEPENDS+= @PCI_SUPPORT |
TITLE+= (RTL8180 PCI) |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl818x_pci.ko |
AUTOLOAD:=$(call AutoProbe,rtl818x_pci) |
endef |
|
define KernelPackage/rtl8187 |
$(call KernelPackage/rtl818x/Default) |
DEPENDS+= @USB_SUPPORT +kmod-usb-core |
TITLE+= (RTL8187 USB) |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.ko |
AUTOLOAD:=$(call AutoProbe,rtl8187) |
endef |
|
define KernelPackage/rtlwifi/config |
config PACKAGE_RTLWIFI_DEBUG |
bool "Realtek wireless debugging" |
depends on PACKAGE_kmod-rtlwifi |
help |
Say Y, if you want to debug realtek wireless drivers. |
|
endef |
|
define KernelPackage/rtlwifi |
$(call KernelPackage/mac80211/Default) |
TITLE:=Realtek common driver part |
DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT) +kmod-mac80211 +@DRIVER_11N_SUPPORT |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtlwifi.ko |
HIDDEN:=1 |
endef |
|
define KernelPackage/rtlwifi-pci |
$(call KernelPackage/mac80211/Default) |
TITLE:=Realtek common driver part (PCI support) |
DEPENDS+= @PCI_SUPPORT +kmod-rtlwifi |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl_pci.ko |
AUTOLOAD:=$(call AutoProbe,rtl_pci) |
HIDDEN:=1 |
endef |
|
define KernelPackage/rtlwifi-btcoexist |
$(call KernelPackage/mac80211/Default) |
TITLE:=Realtek BT coexist support |
DEPENDS+= +kmod-rtlwifi |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/btcoexist/btcoexist.ko |
AUTOLOAD:=$(call AutoProbe,btcoexist) |
HIDDEN:=1 |
endef |
|
define KernelPackage/rtlwifi-usb |
$(call KernelPackage/mac80211/Default) |
TITLE:=Realtek common driver part (USB support) |
DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-rtlwifi |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl_usb.ko |
AUTOLOAD:=$(call AutoProbe,rtl_usb) |
HIDDEN:=1 |
endef |
|
define KernelPackage/rtl8192c-common |
$(call KernelPackage/mac80211/Default) |
TITLE:=Realtek RTL8192CE/RTL8192CU common support module |
DEPENDS+= +kmod-rtlwifi |
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192c/rtl8192c-common.ko |
HIDDEN:=1 |
endef |
|
define KernelPackage/rtl8192ce |
$(call KernelPackage/mac80211/Default) |
TITLE:=Realtek RTL8192CE/RTL8188CE support |
DEPENDS+= +kmod-rtlwifi-pci +kmod-rtl8192c-common +rtl8192ce-firmware |
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rtl8192ce.ko |
AUTOLOAD:=$(call AutoProbe,rtl8192ce) |
endef |
|
define KernelPackage/rtl8192se |
$(call KernelPackage/mac80211/Default) |
TITLE:=Realtek RTL8192SE/RTL8191SE support |
DEPENDS+= +kmod-rtlwifi-pci +rtl8192se-firmware |
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rtl8192se.ko |
AUTOLOAD:=$(call AutoProbe,rtl8192se) |
endef |
|
define KernelPackage/rtl8192de |
$(call KernelPackage/mac80211/Default) |
TITLE:=Realtek RTL8192DE/RTL8188DE support |
DEPENDS+= +kmod-rtlwifi-pci +rtl8192de-firmware |
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rtl8192de.ko |
AUTOLOAD:=$(call AutoProbe,rtl8192de) |
endef |
|
define KernelPackage/rtl8192cu |
$(call KernelPackage/mac80211/Default) |
TITLE:=Realtek RTL8192CU/RTL8188CU support |
DEPENDS+= +kmod-rtlwifi-usb +kmod-rtl8192c-common +rtl8192cu-firmware |
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rtl8192cu.ko |
AUTOLOAD:=$(call AutoProbe,rtl8192cu) |
endef |
|
define KernelPackage/rtl8821ae |
$(call KernelPackage/mac80211/Default) |
TITLE:=Realtek RTL8821AE support |
DEPENDS+= +kmod-rtlwifi-btcoexist +kmod-rtlwifi-pci +rtl8821ae-firmware |
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/rtl8821ae.ko |
AUTOLOAD:=$(call AutoProbe,rtl8821ae) |
endef |
|
define KernelPackage/rtl8xxxu |
$(call KernelPackage/mac80211/Default) |
TITLE:=alternative Realtek RTL8XXXU support |
DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211 |
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko |
AUTOLOAD:=$(call AutoProbe,rtl8xxxu) |
endef |
|
define KernelPackage/rtl8xxxu/description |
This is an alternative driver for various Realtek RTL8XXX |
parts written to utilize the Linux mac80211 stack. |
The driver is known to work with a number of RTL8723AU, |
RL8188CU, RTL8188RU, RTL8191CU, and RTL8192CU devices |
|
This driver is under development and has a limited feature |
set. In particular it does not yet support 40MHz channels |
and power management. However it should have a smaller |
memory footprint than the vendor drivers and benetifs |
from the in kernel mac80211 stack. |
|
It can coexist with drivers from drivers/staging/rtl8723au, |
drivers/staging/rtl8192u, and drivers/net/wireless/rtlwifi, |
but you will need to control which module you wish to load. |
|
RTL8XXXU_UNTESTED is enabled |
This option enables detection of Realtek 8723/8188/8191/8192 WiFi |
USB devices which have not been tested directly by the driver |
author or reported to be working by third parties. |
|
Please report your results! |
endef |
|
|
define KernelPackage/wlcore |
$(call KernelPackage/mac80211/Default) |
TITLE:=TI common driver part |
@@ -386,14 +1563,58 @@ |
AUTOLOAD:=$(call AutoProbe,zd1211rw) |
endef |
|
|
|
config_package=$(if $(CONFIG_PACKAGE_kmod-$(1)),m) |
|
config-y:= \ |
WLAN \ |
NL80211_TESTMODE \ |
CFG80211_WEXT \ |
CFG80211_CERTIFICATION_ONUS \ |
MAC80211_RC_MINSTREL \ |
MAC80211_RC_MINSTREL_HT \ |
MAC80211_RC_MINSTREL_VHT \ |
MAC80211_RC_DEFAULT_MINSTREL \ |
WLAN_VENDOR_ADMTEK \ |
WLAN_VENDOR_ATH \ |
WLAN_VENDOR_ATMEL \ |
WLAN_VENDOR_BROADCOM \ |
WLAN_VENDOR_CISCO \ |
WLAN_VENDOR_INTEL \ |
WLAN_VENDOR_INTERSIL \ |
WLAN_VENDOR_MARVELL \ |
WLAN_VENDOR_MEDIATEK \ |
WLAN_VENDOR_RALINK \ |
WLAN_VENDOR_REALTEK \ |
WLAN_VENDOR_RSI \ |
WLAN_VENDOR_ST \ |
WLAN_VENDOR_TI \ |
WLAN_VENDOR_ZYDAS \ |
|
config-$(call config_package,cfg80211) += CFG80211 |
|
config-$(call config_package,mac80211) += MAC80211 |
config-$(CONFIG_PACKAGE_MAC80211_MESH) += MAC80211_MESH |
ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS |
config-y += \ |
CFG80211_DEBUGFS \ |
MAC80211_DEBUGFS |
MAC80211_DEBUGFS \ |
ATH9K_DEBUGFS \ |
ATH9K_HTC_DEBUGFS \ |
ATH10K_DEBUGFS \ |
CARL9170_DEBUGFS \ |
ATH5K_DEBUG \ |
ATH6KL_DEBUG |
endif |
|
ifdef CONFIG_PACKAGE_MAC80211_TRACING |
config-y += \ |
ATH10K_TRACING \ |
ATH6KL_TRACING \ |
ATH_TRACEPOINTS \ |
WIL6210_TRACING \ |
ATH5K_TRACER \ |
IWLWIFI_DEVICE_TRACING |
endif |
|
@@ -401,10 +1622,96 @@ |
|
config-$(call config_package,airo) += AIRO |
|
config-$(call config_package,ath) += ATH_CARDS ATH_COMMON ATH_REG_DYNAMIC_USER_REG_HINTS |
config-$(CONFIG_PACKAGE_ATH_DEBUG) += ATH_DEBUG ATH10K_DEBUG ATH9K_STATION_STATISTICS |
config-$(CONFIG_PACKAGE_ATH_DFS) += ATH9K_DFS_CERTIFIED ATH10K_DFS_CERTIFIED |
config-$(CONFIG_PACKAGE_ATH_SPECTRAL) += ATH9K_COMMON_SPECTRAL ATH10K_SPECTRAL |
config-$(CONFIG_PACKAGE_ATH_DYNACK) += ATH9K_DYNACK |
config-$(call config_package,ath9k) += ATH9K |
config-$(call config_package,ath9k-common) += ATH9K_COMMON |
config-$(CONFIG_TARGET_ar71xx) += ATH9K_AHB |
config-$(CONFIG_TARGET_ipq40xx) += ATH10K_AHB |
config-$(CONFIG_PCI) += ATH9K_PCI |
config-$(CONFIG_ATH_USER_REGD) += ATH_USER_REGD |
config-$(CONFIG_ATH9K_SUPPORT_PCOEM) += ATH9K_PCOEM |
config-$(CONFIG_ATH9K_TX99) += ATH9K_TX99 |
config-$(CONFIG_ATH9K_UBNTHSR) += ATH9K_UBNTHSR |
|
config-$(call config_package,ath9k-htc) += ATH9K_HTC |
config-$(call config_package,ath10k) += ATH10K ATH10K_PCI |
|
config-$(call config_package,ath5k) += ATH5K |
ifdef CONFIG_TARGET_ath25 |
config-y += ATH5K_AHB |
else |
config-y += ATH5K_PCI |
endif |
|
config-$(call config_package,ath6kl) += ATH6KL |
config-$(call config_package,ath6kl-sdio) += ATH6KL_SDIO |
config-$(call config_package,ath6kl-usb) += ATH6KL_USB |
|
config-$(call config_package,carl9170) += CARL9170 |
|
config-$(call config_package,b43) += B43 |
config-$(CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB) += B43_BUSES_BCMA_AND_SSB |
config-$(CONFIG_PACKAGE_B43_BUSES_BCMA) += B43_BUSES_BCMA |
config-$(CONFIG_PACKAGE_B43_BUSES_SSB) += B43_BUSES_SSB |
config-$(CONFIG_PACKAGE_B43_PHY_G) += B43_PHY_G |
config-$(CONFIG_PACKAGE_B43_PHY_N) += B43_PHY_N |
config-$(CONFIG_PACKAGE_B43_PHY_LP) += B43_PHY_LP |
config-$(CONFIG_PACKAGE_B43_PHY_HT) += B43_PHY_HT |
config-$(CONFIG_PACKAGE_B43_PIO) += B43_PIO |
config-$(CONFIG_PACKAGE_B43_DEBUG) += B43_DEBUG |
|
config-$(call config_package,b43legacy) += B43LEGACY |
config-y += B43LEGACY_DMA_MODE |
|
config-$(call config_package,brcmutil) += BRCMUTIL |
config-$(call config_package,brcmsmac) += BRCMSMAC |
config-$(call config_package,brcmfmac) += BRCMFMAC |
config-$(CONFIG_BRCMFMAC_SDIO) += BRCMFMAC_SDIO |
config-$(CONFIG_BRCMFMAC_USB) += BRCMFMAC_USB |
config-$(CONFIG_BRCMFMAC_PCIE) += BRCMFMAC_PCIE |
config-$(CONFIG_PACKAGE_BRCM80211_DEBUG) += BRCMDBG |
|
config-$(call config_package,mac80211-hwsim) += MAC80211_HWSIM |
config-$(call config_package,mt7601u) += MT7601U |
config-y += WL_MEDIATEK |
|
config-$(call config_package,rt2x00-lib) += RT2X00 RT2X00_LIB |
config-$(call config_package,rt2x00-pci) += RT2X00_LIB_PCI |
config-$(call config_package,rt2x00-mmio) += RT2X00_LIB_MMIO |
config-$(call config_package,rt2x00-usb) += RT2X00_LIB_USB |
config-$(CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS) += RT2X00_LIB_DEBUGFS |
config-$(CONFIG_PACKAGE_RT2X00_DEBUG) += RT2X00_DEBUG |
|
config-$(call config_package,rt2400-pci) += RT2400PCI |
config-$(call config_package,rt2500-pci) += RT2500PCI |
config-$(call config_package,rt2500-usb) += RT2500USB |
config-$(call config_package,rt61-pci) += RT61PCI |
config-$(call config_package,rt73-usb) += RT73USB |
|
config-$(call config_package,rt2800-lib) += RT2800_LIB |
|
config-$(call config_package,rt2800-soc) += RT2800SOC |
config-$(call config_package,rt2800-pci) += RT2800PCI |
config-y += RT2800PCI_RT33XX RT2800PCI_RT35XX RT2800PCI_RT53XX RT2800PCI_RT3290 |
|
config-$(call config_package,rt2800-usb) += RT2800USB |
config-y += RT2800USB_RT33XX RT2800USB_RT35XX RT2800USB_RT3573 RT2800USB_RT53XX RT2800USB_RT55XX RT2800USB_UNKNOWN |
|
config-$(call config_package,iwl-legacy) += IWLEGACY |
config-$(call config_package,iwl3945) += IWL3945 |
config-$(call config_package,iwl4965) += IWL4965 |
config-$(call config_package,iwlwifi) += IWLWIFI IWLDVM IWLMVM |
config-$(CONFIG_PACKAGE_IWLWIFI_DEBUG)+= IWLWIFI_DEBUG |
config-$(CONFIG_PACKAGE_IWLWIFI_DEBUGFS)+= IWLWIFI_DEBUGFS |
|
config-$(call config_package,libipw) += LIBIPW |
config-$(call config_package,ipw2100) += IPW2100 |
config-$(call config_package,ipw2200) += IPW2200 |
|
config-$(call config_package,p54-common) += P54_COMMON |
config-$(call config_package,p54-pci) += P54_PCI |
config-$(call config_package,p54-usb) += P54_USB |
@@ -417,6 +1724,14 @@ |
config-y += HERMES_PRISM |
|
config-$(call config_package,adm8211) += ADM8211 |
config-$(call config_package,libertas-sdio) += LIBERTAS LIBERTAS_SDIO |
config-$(call config_package,libertas-usb) += LIBERTAS LIBERTAS_USB |
config-$(call config_package,libertas-spi) += LIBERTAS LIBERTAS_SPI |
config-$(call config_package,mwl8k) += MWL8K |
config-$(call config_package,mwifiex-pcie) += MWIFIEX MWIFIEX_PCIE |
config-$(call config_package,mwifiex-sdio) += MWIFIEX MWIFIEX_SDIO |
config-$(call config_package,rtl8180) += RTL8180 |
config-$(call config_package,rtl8187) += RTL8187 |
config-$(call config_package,wlcore) += WLCORE WLCORE_SDIO |
config-$(call config_package,wl12xx) += WL12XX |
config-$(call config_package,wl18xx) += WL18XX |
@@ -426,8 +1741,23 @@ |
config-$(call config_package,rsi91x-usb) += RSI_USB |
config-$(call config_package,rsi91x-sdio) += RSI_SDIO |
|
config-$(CONFIG_LEDS_TRIGGERS) += MAC80211_LEDS |
config-$(call config_package,rtlwifi) += RTL_CARDS RTLWIFI |
config-$(call config_package,rtlwifi-pci) += RTLWIFI_PCI |
config-$(call config_package,rtlwifi-btcoexist) += RTLBTCOEXIST |
config-$(call config_package,rtlwifi-usb) += RTLWIFI_USB |
config-$(call config_package,rtl8192c-common) += RTL8192C_COMMON |
config-$(call config_package,rtl8192ce) += RTL8192CE |
config-$(call config_package,rtl8192se) += RTL8192SE |
config-$(call config_package,rtl8192de) += RTL8192DE |
config-$(call config_package,rtl8192cu) += RTL8192CU |
config-$(call config_package,rtl8821ae) += RTL8821AE |
config-$(CONFIG_PACKAGE_RTLWIFI_DEBUG) += RTLWIFI_DEBUG |
|
config-$(call config_package,rtl8xxxu) += RTL8XXXU |
config-y += RTL8XXXU_UNTESTED |
|
config-$(CONFIG_LEDS_TRIGGERS) += MAC80211_LEDS B43_LEDS B43LEGACY_LEDS |
|
MAKE_OPTS:= -C "$(PKG_BUILD_DIR)" \ |
$(KERNEL_MAKE_FLAGS) \ |
EXTRA_CFLAGS="-I$(PKG_BUILD_DIR)/include $(IREMAP_CFLAGS)" \ |
@@ -490,26 +1820,6 @@ |
endif |
endif |
|
define Build/Patch |
$(if $(QUILT),rm -rf $(PKG_BUILD_DIR)/patches; mkdir -p $(PKG_BUILD_DIR)/patches) |
$(call PatchDir,$(PKG_BUILD_DIR),$(PATCH_DIR)/build,build/) |
$(call PatchDir,$(PKG_BUILD_DIR),$(PATCH_DIR)/subsys,subsys/) |
$(call PatchDir,$(PKG_BUILD_DIR),$(PATCH_DIR)/ath,ath/) |
$(call PatchDir,$(PKG_BUILD_DIR),$(PATCH_DIR)/rt2x00,rt2x00/) |
$(call PatchDir,$(PKG_BUILD_DIR),$(PATCH_DIR)/mwl,mwl/) |
$(call PatchDir,$(PKG_BUILD_DIR),$(PATCH_DIR)/brcm,brcm/) |
$(if $(QUILT),touch $(PKG_BUILD_DIR)/.quilt_used) |
endef |
|
define Quilt/Refresh/Package |
$(call Quilt/RefreshDir,$(PKG_BUILD_DIR),$(PATCH_DIR)/build,build/) |
$(call Quilt/RefreshDir,$(PKG_BUILD_DIR),$(PATCH_DIR)/subsys,subsys/) |
$(call Quilt/RefreshDir,$(PKG_BUILD_DIR),$(PATCH_DIR)/ath,ath/) |
$(call Quilt/RefreshDir,$(PKG_BUILD_DIR),$(PATCH_DIR)/rt2x00,rt2x00/) |
$(call Quilt/RefreshDir,$(PKG_BUILD_DIR),$(PATCH_DIR)/mwl,mwl/) |
$(call Quilt/RefreshDir,$(PKG_BUILD_DIR),$(PATCH_DIR)/brcm,brcm/) |
endef |
|
define Build/Compile |
$(SH_FUNC) var2file "$(call shvar,mac80211_config)" $(PKG_BUILD_DIR)/.config |
$(MAKE) $(MAKE_OPTS) allnoconfig |
@@ -552,6 +1862,14 @@ |
endif |
endef |
|
define KernelPackage/brcmsmac/install |
$(INSTALL_DIR) $(1)/lib/firmware/brcm |
ifeq ($(CONFIG_BRCMSMAC_USE_FW_FROM_WL),y) |
tar xjf "$(DL_DIR)/$(PKG_BRCMSMAC_FW_SOURCE)" -C "$(PKG_BUILD_DIR)" |
b43-fwcutter --brcmsmac -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_BRCMSMAC_FW_OBJECT) |
endif |
endef |
|
define KernelPackage/cfg80211/install |
$(INSTALL_DIR) $(1)/lib/wifi $(1)/lib/netifd/wireless |
$(INSTALL_DATA) ./files/lib/wifi/mac80211.sh $(1)/lib/wifi |
@@ -560,11 +1878,96 @@ |
$(INSTALL_DATA) ./files/mac80211.hotplug $(1)/etc/hotplug.d/ieee80211/10-wifi-detect |
endef |
|
define KernelPackage/ipw2100/install |
$(INSTALL_DIR) $(1)/lib/firmware |
$(INSTALL_DATA) $(PKG_BUILD_DIR)/ipw2100-$(IPW2100_VERSION)*.fw $(1)/lib/firmware |
endef |
|
define KernelPackage/ipw2200/install |
$(INSTALL_DIR) $(1)/lib/firmware |
$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION)/ipw2200*.fw $(1)/lib/firmware |
endef |
|
define KernelPackage/zd1211rw/install |
$(INSTALL_DIR) $(1)/lib/firmware/zd1211 |
$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(ZD1211FW_NAME)/zd1211* $(1)/lib/firmware/zd1211 |
endef |
|
$(eval $(foreach drv,$(PKG_DRIVERS),$(call KernelPackage,$(drv)))) |
|
$(eval $(call KernelPackage,adm8211)) |
$(eval $(call KernelPackage,airo)) |
$(eval $(call KernelPackage,ath)) |
$(eval $(call KernelPackage,ath10k)) |
$(eval $(call KernelPackage,ath5k)) |
$(eval $(call KernelPackage,ath6kl)) |
$(eval $(call KernelPackage,ath6kl-sdio)) |
$(eval $(call KernelPackage,ath6kl-usb)) |
$(eval $(call KernelPackage,ath9k)) |
$(eval $(call KernelPackage,ath9k-common)) |
$(eval $(call KernelPackage,ath9k-htc)) |
$(eval $(call KernelPackage,b43)) |
$(eval $(call KernelPackage,b43legacy)) |
$(eval $(call KernelPackage,brcmsmac)) |
$(eval $(call KernelPackage,brcmfmac)) |
$(eval $(call KernelPackage,brcmutil)) |
$(eval $(call KernelPackage,carl9170)) |
$(eval $(call KernelPackage,cfg80211)) |
$(eval $(call KernelPackage,hermes)) |
$(eval $(call KernelPackage,hermes-pci)) |
$(eval $(call KernelPackage,hermes-plx)) |
$(eval $(call KernelPackage,hermes-pcmcia)) |
$(eval $(call KernelPackage,iwlwifi)) |
$(eval $(call KernelPackage,iwl-legacy)) |
$(eval $(call KernelPackage,iwl4965)) |
$(eval $(call KernelPackage,iwl3945)) |
$(eval $(call KernelPackage,lib80211)) |
$(eval $(call KernelPackage,libertas-usb)) |
$(eval $(call KernelPackage,libertas-sdio)) |
$(eval $(call KernelPackage,libertas-spi)) |
$(eval $(call KernelPackage,libipw)) |
$(eval $(call KernelPackage,ipw2100)) |
$(eval $(call KernelPackage,ipw2200)) |
$(eval $(call KernelPackage,mac80211)) |
$(eval $(call KernelPackage,mac80211-hwsim)) |
$(eval $(call KernelPackage,mt7601u)) |
$(eval $(call KernelPackage,mwl8k)) |
$(eval $(call KernelPackage,mwifiex-pcie)) |
$(eval $(call KernelPackage,mwifiex-sdio)) |
$(eval $(call KernelPackage,p54-common)) |
$(eval $(call KernelPackage,p54-pci)) |
$(eval $(call KernelPackage,p54-usb)) |
$(eval $(call KernelPackage,p54-spi)) |
$(eval $(call KernelPackage,rsi91x)) |
$(eval $(call KernelPackage,rsi91x-usb)) |
$(eval $(call KernelPackage,rsi91x-sdio)) |
$(eval $(call KernelPackage,rt2x00-lib)) |
$(eval $(call KernelPackage,rt2x00-mmio)) |
$(eval $(call KernelPackage,rt2x00-pci)) |
$(eval $(call KernelPackage,rt2x00-usb)) |
$(eval $(call KernelPackage,rt2800-lib)) |
$(eval $(call KernelPackage,rt2400-pci)) |
$(eval $(call KernelPackage,rt2500-pci)) |
$(eval $(call KernelPackage,rt2500-usb)) |
$(eval $(call KernelPackage,rt2800-mmio)) |
$(eval $(call KernelPackage,rt2800-soc)) |
$(eval $(call KernelPackage,rt2800-pci)) |
$(eval $(call KernelPackage,rt2800-usb)) |
$(eval $(call KernelPackage,rt61-pci)) |
$(eval $(call KernelPackage,rt73-usb)) |
$(eval $(call KernelPackage,rtl8180)) |
$(eval $(call KernelPackage,rtl8187)) |
$(eval $(call KernelPackage,rtlwifi)) |
$(eval $(call KernelPackage,rtlwifi-pci)) |
$(eval $(call KernelPackage,rtlwifi-btcoexist)) |
$(eval $(call KernelPackage,rtlwifi-usb)) |
$(eval $(call KernelPackage,rtl8192c-common)) |
$(eval $(call KernelPackage,rtl8192ce)) |
$(eval $(call KernelPackage,rtl8192se)) |
$(eval $(call KernelPackage,rtl8192de)) |
$(eval $(call KernelPackage,rtl8192cu)) |
$(eval $(call KernelPackage,rtl8821ae)) |
$(eval $(call KernelPackage,rtl8xxxu)) |
$(eval $(call KernelPackage,wlcore)) |
$(eval $(call KernelPackage,wl12xx)) |
$(eval $(call KernelPackage,wl18xx)) |
$(eval $(call KernelPackage,zd1211rw)) |