OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "rt3050.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "hauppauge,broadway", "ralink,rt3052-soc";
10 model = "Hauppauge Broadway";
11  
12 cfi@1f000000 {
13 compatible = "cfi-flash";
14 reg = <0x1f000000 0x800000>;
15 bank-width = <2>;
16 device-width = <2>;
17  
18 partitions {
19 compatible = "fixed-partitions";
20 #address-cells = <1>;
21 #size-cells = <1>;
22  
23 partition@0 {
24 label = "bootloader";
25 reg = <0x0 0x30000>;
26 read-only;
27 };
28  
29 partition@30000 {
30 label = "config";
31 reg = <0x30000 0x10000>;
32 read-only;
33 };
34  
35 factory: partition@40000 {
36 label = "factory";
37 reg = <0x40000 0x10000>;
38 read-only;
39 };
40  
41 partition@50000 {
42 compatible = "denx,uimage";
43 label = "firmware";
44 reg = <0x50000 0x790000>;
45 };
46 };
47 };
48  
49 leds {
50 compatible = "gpio-leds";
51  
52 diskmounted {
53 label = "broadway:red:diskmounted";
54 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
55 trigger-sources = <&otg_port1>;
56 linux,default-trigger = "usbport";
57 };
58  
59 wps_active {
60 label = "broadway:red:wps_active";
61 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
62 };
63 };
64  
65 keys {
66 compatible = "gpio-keys-polled";
67 poll-interval = <20>;
68  
69 factory {
70 label = "Factory Reset button";
71 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
72 linux,code = <KEY_RESTART>;
73 };
74 };
75 };
76  
77 &pinctrl {
78 state_default: pinctrl0 {
79 gpio {
80 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
81 ralink,function = "gpio";
82 };
83 };
84 };
85  
86 &ethernet {
87 mtd-mac-address = <&factory 0x4>;
88 };
89  
90 &esw {
91 mediatek,portmap = <0x3e>;
92 };
93  
94 &wmac {
95 ralink,mtd-eeprom = <&factory 0>;
96 };
97  
98 &otg {
99 status = "okay";
100 };