OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 From 1fc7d5523e21ed140fed43c4dde011a3b6d9ba08 Mon Sep 17 00:00:00 2001
2 From: John Crispin <john@phrozen.org>
3 Date: Tue, 24 Jul 2018 14:47:55 +0200
4 Subject: [PATCH 3/3] qcom: ipq4019: add USB devicetree nodes
5  
6 This patch makes USB work on the Dakota EVB.
7  
8 Signed-off-by: John Crispin <john@phrozen.org>
9 ---
10 arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++
11 arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++
12 2 files changed, 94 insertions(+)
13  
14 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
15 +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
16 @@ -101,5 +101,25 @@
17 wifi@a800000 {
18 status = "ok";
19 };
20 +
21 + usb3_ss_phy: ssphy@9a000 {
22 + status = "ok";
23 + };
24 +
25 + usb3_hs_phy: hsphy@a6000 {
26 + status = "ok";
27 + };
28 +
29 + usb3: usb3@8af8800 {
30 + status = "ok";
31 + };
32 +
33 + usb2_hs_phy: hsphy@a8000 {
34 + status = "ok";
35 + };
36 +
37 + usb2: usb2@60f8800 {
38 + status = "ok";
39 + };
40 };
41 };
42 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
43 +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
44 @@ -410,5 +410,79 @@
45 "legacy";
46 status = "disabled";
47 };
48 +
49 + usb3_ss_phy: ssphy@9a000 {
50 + compatible = "qcom,usb-ss-ipq4019-phy";
51 + #phy-cells = <0>;
52 + reg = <0x9a000 0x800>;
53 + reg-names = "phy_base";
54 + resets = <&gcc USB3_UNIPHY_PHY_ARES>;
55 + reset-names = "por_rst";
56 + status = "disabled";
57 + };
58 +
59 + usb3_hs_phy: hsphy@a6000 {
60 + compatible = "qcom,usb-hs-ipq4019-phy";
61 + #phy-cells = <0>;
62 + reg = <0xa6000 0x40>;
63 + reg-names = "phy_base";
64 + resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
65 + reset-names = "por_rst", "srif_rst";
66 + status = "disabled";
67 + };
68 +
69 + usb3@8af8800 {
70 + compatible = "qcom,dwc3";
71 + reg = <0x8af8800 0x100>;
72 + #address-cells = <1>;
73 + #size-cells = <1>;
74 + clocks = <&gcc GCC_USB3_MASTER_CLK>,
75 + <&gcc GCC_USB3_SLEEP_CLK>,
76 + <&gcc GCC_USB3_MOCK_UTMI_CLK>;
77 + clock-names = "master", "sleep", "mock_utmi";
78 + ranges;
79 + status = "disabled";
80 +
81 + dwc3@8a00000 {
82 + compatible = "snps,dwc3";
83 + reg = <0x8a00000 0xf8000>;
84 + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
85 + phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
86 + phy-names = "usb2-phy", "usb3-phy";
87 + dr_mode = "host";
88 + };
89 + };
90 +
91 + usb2_hs_phy: hsphy@a8000 {
92 + compatible = "qcom,usb-hs-ipq4019-phy";
93 + #phy-cells = <0>;
94 + reg = <0xa8000 0x40>;
95 + reg-names = "phy_base";
96 + resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
97 + reset-names = "por_rst", "srif_rst";
98 + status = "disabled";
99 + };
100 +
101 + usb2@60f8800 {
102 + compatible = "qcom,dwc3";
103 + reg = <0x60f8800 0x100>;
104 + #address-cells = <1>;
105 + #size-cells = <1>;
106 + clocks = <&gcc GCC_USB2_MASTER_CLK>,
107 + <&gcc GCC_USB2_SLEEP_CLK>,
108 + <&gcc GCC_USB2_MOCK_UTMI_CLK>;
109 + clock-names = "master", "sleep", "mock_utmi";
110 + ranges;
111 + status = "disabled";
112 +
113 + dwc3@6000000 {
114 + compatible = "snps,dwc3";
115 + reg = <0x6000000 0xf8000>;
116 + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
117 + phys = <&usb2_hs_phy>;
118 + phy-names = "usb2-phy";
119 + dr_mode = "host";
120 + };
121 + };
122 };
123 };