OpenWrt – Blame information for rev 1
?pathlinks?
Rev | Author | Line No. | Line |
---|---|---|---|
1 | office | 1 | / { |
2 | #address-cells = <1>; |
||
3 | #size-cells = <1>; |
||
4 | compatible = "brcm,bcm6328"; |
||
5 | |||
6 | aliases { |
||
7 | pinctrl = &pinctrl; |
||
8 | serial0 = &uart0; |
||
9 | serial1 = &uart1; |
||
10 | spi1 = &hsspi; |
||
11 | }; |
||
12 | |||
13 | cpus { |
||
14 | #address-cells = <1>; |
||
15 | #size-cells = <0>; |
||
16 | |||
17 | cpu@0 { |
||
18 | compatible = "brcm,bmips4350", "mips,mips4Kc"; |
||
19 | device_type = "cpu"; |
||
20 | reg = <0>; |
||
21 | }; |
||
22 | }; |
||
23 | |||
24 | cpu_intc: interrupt-controller { |
||
25 | #address-cells = <0>; |
||
26 | compatible = "mti,cpu-interrupt-controller"; |
||
27 | |||
28 | interrupt-controller; |
||
29 | #interrupt-cells = <1>; |
||
30 | }; |
||
31 | |||
32 | memory { device_type = "memory"; reg = <0 0>; }; |
||
33 | |||
34 | ubus@10000000 { |
||
35 | #address-cells = <1>; |
||
36 | #size-cells = <1>; |
||
37 | ranges; |
||
38 | compatible = "simple-bus"; |
||
39 | interrupt-parent = <&periph_intc>; |
||
40 | |||
41 | ext_intc: interrupt-controller@10000018 { |
||
42 | compatible = "brcm,bcm6345-ext-intc"; |
||
43 | reg = <0x10000018 0x4>; |
||
44 | |||
45 | interrupt-controller; |
||
46 | #interrupt-cells = <2>; |
||
47 | |||
48 | interrupts = <24>, <25>, <26>, <27>; |
||
49 | }; |
||
50 | |||
51 | periph_intc: interrupt-controller@10000020 { |
||
52 | compatible = "brcm,bcm6345-l1-intc"; |
||
53 | reg = <0x10000020 0x10>; |
||
54 | |||
55 | interrupt-controller; |
||
56 | #interrupt-cells = <1>; |
||
57 | |||
58 | interrupt-parent = <&cpu_intc>; |
||
59 | interrupts = <2>; |
||
60 | }; |
||
61 | |||
62 | pinctrl: pin-controller@10000080 { |
||
63 | compatible = "brcm,bcm6328-pinctrl"; |
||
64 | reg = <0x10000080 0x8>, |
||
65 | <0x10000088 0x8>, |
||
66 | <0x10000098 0x4>, |
||
67 | <0x1000009c 0xc>; |
||
68 | reg-names = "dirout", "dat", "mode", "mux"; |
||
69 | |||
70 | gpio-controller; |
||
71 | #gpio-cells = <2>; |
||
72 | |||
73 | interrupt-parent = <&ext_intc>; |
||
74 | interrupts = <3 0>, <2 0>, <0 0>, <1 0>; |
||
75 | interrupt-names = "gpio12", "gpio15", |
||
76 | "gpio23", "gpio24"; |
||
77 | |||
78 | pinctrl_serial_led: serial_led { |
||
79 | pinctrl_serial_led_data: serial_led_data { |
||
80 | function = "serial_led_data"; |
||
81 | pins = "gpio6"; |
||
82 | }; |
||
83 | |||
84 | pinctrl_serial_led_clk: serial_led_clk { |
||
85 | function = "serial_led_clk"; |
||
86 | pins = "gpio7"; |
||
87 | }; |
||
88 | }; |
||
89 | |||
90 | pinctrl_inet_act_led: inet_act_led { |
||
91 | function = "inet_act_led"; |
||
92 | pins = "gpio11"; |
||
93 | }; |
||
94 | |||
95 | pinctrl_pcie_clkreq: pcie_clkreq { |
||
96 | function = "pcie_clkreq"; |
||
97 | pins = "gpio16"; |
||
98 | }; |
||
99 | |||
100 | pinctrl_ephy0_spd_led: ephy0_spd_led { |
||
101 | function = "led"; |
||
102 | pins = "gpio17"; |
||
103 | }; |
||
104 | |||
105 | pinctrl_ephy1_spd_led: ephy1_spd_led { |
||
106 | function = "led"; |
||
107 | pins = "gpio18"; |
||
108 | }; |
||
109 | |||
110 | pinctrl_ephy2_spd_led: ephy2_spd_led { |
||
111 | function = "led"; |
||
112 | pins = "gpio19"; |
||
113 | }; |
||
114 | |||
115 | pinctrl_ephy3_spd_led: ephy3_spd_led { |
||
116 | function = "led"; |
||
117 | pins = "gpio20"; |
||
118 | }; |
||
119 | |||
120 | pinctrl_ephy0_act_led: ephy0_act_led { |
||
121 | function = "ephy0_act_led"; |
||
122 | pins = "gpio25"; |
||
123 | }; |
||
124 | |||
125 | pinctrl_ephy1_act_led: ephy1_act_led { |
||
126 | function = "ephy1_act_led"; |
||
127 | pins = "gpio26"; |
||
128 | }; |
||
129 | |||
130 | pinctrl_ephy2_act_led: ephy2_act_led { |
||
131 | function = "ephy2_act_led"; |
||
132 | pins = "gpio27"; |
||
133 | }; |
||
134 | |||
135 | pinctrl_ephy3_act_led: ephy3_act_led { |
||
136 | function = "ephy3_act_led"; |
||
137 | pins = "gpio28"; |
||
138 | }; |
||
139 | |||
140 | pinctrl_hsspi_cs1: hsspi_cs1 { |
||
141 | function = "hsspi_cs1"; |
||
142 | pins = "hsspi_cs1"; |
||
143 | }; |
||
144 | |||
145 | pinctrl_usb_port1_device: usb_port1_device { |
||
146 | function = "usb_device_port"; |
||
147 | pins = "usb_port1"; |
||
148 | }; |
||
149 | |||
150 | pinctrl_usb_port1_host: usb_port1_host { |
||
151 | function = "usb_host_port"; |
||
152 | pins = "usb_port1"; |
||
153 | }; |
||
154 | }; |
||
155 | |||
156 | uart0: serial@10000100 { |
||
157 | compatible = "brcm,bcm6345-uart"; |
||
158 | reg = <0x10000100 0x18>; |
||
159 | |||
160 | interrupt-parent = <&periph_intc>; |
||
161 | interrupts = <28>; |
||
162 | |||
163 | /* clocks = <&periph_clk>; */ |
||
164 | /* clock-names = "refclk"; */ |
||
165 | |||
166 | status = "disabled"; |
||
167 | }; |
||
168 | |||
169 | uart1: serial@10000120 { |
||
170 | compatible = "brcm,bcm6345-uart"; |
||
171 | reg = <0x10000120 0x18>; |
||
172 | |||
173 | interrupt-parent = <&periph_intc>; |
||
174 | interrupts = <39>; |
||
175 | |||
176 | /* clocks = <&periph_clk>; */ |
||
177 | /* clock-names = "refclk"; */ |
||
178 | |||
179 | status = "disabled"; |
||
180 | }; |
||
181 | |||
182 | leds: led-controller@10000800 { |
||
183 | #address-cells = <1>; |
||
184 | #size-cells = <0>; |
||
185 | compatible = "brcm,bcm6328-leds"; |
||
186 | reg = <0x10000800 0x24>; |
||
187 | status = "disabled"; |
||
188 | }; |
||
189 | |||
190 | hsspi: spi@10001000 { |
||
191 | #address-cells = <1>; |
||
192 | #size-cells = <0>; |
||
193 | compatible = "brcm,bcm6328-hsspi"; |
||
194 | reg = <0x10001000 0x600>; |
||
195 | interrupts = <29>; |
||
196 | /* clocks = <&clkctl 9>; */ |
||
197 | }; |
||
198 | }; |
||
199 | }; |